{"title":"Commercial Band Sealers","description":"\u003c!-- Intro Section --\u003e\n\n\u003cp\u003eA band sealer closes bags and pouches with a continuously moving heated belt. It runs a steady stream of packages through the seal instead of one bag at a time. That speed makes it the standard tool for lines that bag snacks, coffee, spices, dry goods, hardware, and pharmaceuticals at volume. The belt grips the top of the bag and carries it through heated elements that fuse the seam. The seal then cools, and the machine can add a date code in the same pass.\u003c\/p\u003e\n\n\u003cp\u003eThese machines come in horizontal and vertical formats. A horizontal unit lays the bag flat on the conveyor, which suits dry and solid products and runs fast for high-volume work. A vertical unit keeps the bag upright so liquids, powders, and granules do not spill while the top seals. Continuous operation, adjustable speed, and inline coding let one machine handle many bag materials. That includes poly, laminate, foil, and paper.\u003c\/p\u003e\n\n\u003cp\u003eEvery unit in this collection is a commercial band sealer built for industrial packaging lines. Common configurations, what to check before buying, and the questions buyers ask most often follow below.\u003c\/p\u003e\n\n\u003c!-- more --\u003e\n\n\u003c!-- Detailed Section --\u003e\n\n\u003ch2\u003eCommon Types and Configurations\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorizontal band sealer:\u003c\/strong\u003e The bag lays flat on the conveyor. Best for dry and solid products and for fast, high-volume sealing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVertical band sealer:\u003c\/strong\u003e The bag travels upright so liquids, powders, and granular products do not spill while the top seals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConvertible continuous band sealer:\u003c\/strong\u003e Models with a conversion kit switch between horizontal and vertical to cover both product types on one machine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotary band sealer and tilt-head models:\u003c\/strong\u003e Specialty feeds for heavier or awkward bags, including rotary support and a tilt head for liquid-filled pouches.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePortable models:\u003c\/strong\u003e Compact touchscreen units rated to a lighter duty that seal at the bench or move between stations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoding and finishing options:\u003c\/strong\u003e Dry ink coding for date and lot numbers, embossing, digital counters, trimmers, and vacuum with gas flush on select models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat to Look at Before You Buy\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBag orientation:\u003c\/strong\u003e Choose horizontal for dry and solid products, vertical for liquids, powders, and granules.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal width:\u003c\/strong\u003e Models run from 10mm up to 30mm, with the wider 30mm seal suited to hang-hole retail bags.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThroughput:\u003c\/strong\u003e Conveyor speeds reach 0 to 630 inches per minute on full-size units, and 0 to 275 inches per minute on portable units.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBag material and thickness:\u003c\/strong\u003e These machines handle poly, laminate, foil, and paper bags. Match the temperature range to the film you run.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoding and traceability:\u003c\/strong\u003e Dry ink coding and embossing add date codes and lot numbers inline, which matters for food and pharmaceutical packaging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Most units run on standard 110V, and 220V versions are available for higher-demand lines.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFeed direction and placement:\u003c\/strong\u003e Left or right feed and counter or floor placement should match how product reaches the operator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat Is a Band Sealer?\u003c\/h3\u003e\n\u003cp\u003eA band sealer is a continuous sealing machine that closes bags and pouches with a moving heated belt. The belt grips the top of the bag, carries it through heated elements that fuse the seam, then cools the seal. Because it runs continuously, it seals far faster than a single-cycle bar sealer. Production lines use it to bag products at volume.\u003c\/p\u003e\n\n\u003ch3\u003eShould I Choose a Horizontal or Vertical Band Sealer?\u003c\/h3\u003e\n\u003cp\u003eChoose a horizontal unit for dry and solid products. The bag lays flat on the conveyor, and horizontal models run faster for high-volume work. Choose a vertical unit when the bag holds liquids, powders, or granules, since the upright position keeps the contents out of the seal. Convertible models switch between both orientations with a conversion kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is the Difference Between a Heat Sealer and a Band Sealer?\u003c\/h3\u003e\n\u003cp\u003eA standard heat or bar sealer presses one seal at a time and waits for each cycle to finish. A band sealer runs a continuous heated belt, so bags feed through in a steady stream without stopping. That makes it much faster for production runs, with full-size models reaching 0 to 630 inches per minute. Bar sealers still suit low-volume or occasional sealing.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Categories\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/bag-sealers\"\u003eBag Sealers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/vacuum-sealers\"\u003eVacuum Sealers\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/shrink-wrap-machines\"\u003eShrink Wrap Machines\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/packaging-conveyors\"\u003ePackaging Conveyors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShop by Brand\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/sealer-sales\"\u003eSealer Sales\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"sealer-sales-cbs-640-whi-portable-continuous-band-sealer-white-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-WHI Portable Continuous Band Sealer, White, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-WHI is a 12 lb portable continuous band sealer in White, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-WHI uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The White powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-WHI handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311166685469,"sku":"CBS-640-WHI","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57069_CBS-640-WHI-hires.jpg?v=1780307202"},{"product_id":"sealer-sales-cbs-640-blu-portable-continuous-band-sealer-blue-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-BLU Portable Continuous Band Sealer, Blue, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-BLU is a 12 lb portable continuous band sealer in Blue, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-BLU uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The Blue powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-BLU handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311187460381,"sku":"CBS-640-BLU","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57064_CBS-640-BLU-hires_8b4abbf0-c32a-48dd-9af0-2ffea5a5b6bd.jpg?v=1780307169"},{"product_id":"sealer-sales-cbs-640-blk-portable-continuous-band-sealer-black-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-BLK Portable Continuous Band Sealer, Black, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-BLK is a 12 lb portable continuous band sealer in Black, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-BLK uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The Black powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-BLK handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311202173213,"sku":"CBS-640-BLK","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57065_CBS-640-BLK-hires_9893f884-631c-4008-8e88-5b6b6c83a409.jpg?v=1780307161"},{"product_id":"sealer-sales-cbs-640-grn-portable-continuous-band-sealer-green-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-GRN Portable Continuous Band Sealer, Green, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-GRN is a 12 lb portable continuous band sealer in Green, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-GRN uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The Green powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-GRN handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311203746077,"sku":"CBS-640-GRN","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57066_CBS-640-GRN-hires_1011d5e0-3c69-4ee5-82ac-997ef2d326ee.jpg?v=1780307178"},{"product_id":"sealer-sales-cbs-640-orn-portable-continuous-band-sealer-orange-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-ORN Portable Continuous Band Sealer, Orange, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-ORN is a 12 lb portable continuous band sealer in Orange, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-ORN uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The Orange powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-ORN handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311203778845,"sku":"CBS-640-ORN","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57067_CBS-640-ORN-hires_7891998e-c86d-469c-a25f-6ed4895f49c0.jpg?v=1780307186"},{"product_id":"sealer-sales-cbs-640-pnk-portable-continuous-band-sealer-pink-10mm-seal-touchscreen-control-0-275-in-min-12-lbs","title":"Sealer Sales CBS-640-PNK Portable Continuous Band Sealer, Pink, 10mm Seal, Touchscreen Control, 0-275 in\/min, 12 lbs","description":"\u003cp\u003eThe Sealer Sales CBS-640-PNK is a 12 lb portable continuous band sealer in Pink, built for facilities that need to seal thermoplastic bags without giving up bench space to a full production-floor machine. Touchscreen controls bring it up to temperature in seconds, the 10 mm wide seal lands a clean 1-1\/2\" down from the top of the bag, and the conveyor moves up to 275 inches per minute. The whole unit is compact enough to slide off the counter when you're done.\u003c\/p\u003e\u003ch3\u003eTouchscreen Control with Auto Shut-Off\u003c\/h3\u003e\u003cp\u003eInstead of a knob and analog dial, the CBS-640-PNK uses a touchscreen controller calibrated 0-200°C (0-482°F). You tap in the temperature for the film you're sealing and the unit holds it shift after shift, with no drift to chase. Auto shut-off engages when the unit sits idle, which matters when a portable sealer migrates between workstations and someone may not remember to flip it off at the end of a run.\u003c\/p\u003e\u003ch3\u003eCompact Footprint, Easy to Relocate\u003c\/h3\u003e\u003cp\u003eThe full footprint is 14\" x 6.5\" x 6.75\". At 12 pounds total, you can lift it onto a different bench, take it to a temporary packout station, or store it on a shelf between jobs. The Pink powder coat finish gives the unit a clean look in retail-adjacent areas and makes it easy to spot if it disappears between shifts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eThe CBS-640-PNK handles polyethylene (LDPE, MDPE, and HDPE), polypropylene, and laminated foil. This unit is engineered for flat bags; gusseted bags are not supported on this chassis.\u003c\/p\u003e\u003ch3\u003eColor Options\u003c\/h3\u003e\u003cp\u003eThe CBS-640 is available in six colors: black (CBS-640-BLK), blue (CBS-640-BLU), green (CBS-640-GRN), orange (CBS-640-ORN), pink (CBS-640-PNK), and white (CBS-640-WHI). All six share identical hardware and specifications.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51311203844381,"sku":"CBS-640-PNK","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57068_CBS-640-PNK-hires_f1c9348f-47f7-48d0-aab7-7349fe74255c.jpg?v=1780307194"},{"product_id":"sealer-sales-cbs-880i-horizontal-continuous-band-sealer-10mm-seal-right-to-left-feed-embossing-0-630-in-min-22-lb-max-load","title":"Sealer Sales CBS-880I Horizontal Continuous Band Sealer, 10mm Seal, Right-to-Left Feed, Embossing, 0-630 in\/min, 22 lb Max Load","description":"\u003cp\u003eThe Sealer Sales CBS-880I is a stainless steel continuous band sealer, the standard 10 mm horizontal right-to-left feeding version. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880I keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880I includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880I can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368514847005,"sku":"CBS-880I","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57375_CBS-880I-img-1_af80d7f8-4bfe-483c-8bb3-ef33e3e801cc.jpg?v=1780307230"},{"product_id":"sealer-sales-cbs-880i-15mm-horizontal-continuous-band-sealer-15mm-seal-width-right-to-left-feed-embossing","title":"Sealer Sales CBS-880I-15mm Horizontal Continuous Band Sealer, 15mm Seal Width, Right-to-Left Feed, Embossing","description":"\u003cp\u003eThe Sealer Sales CBS-880I-15mm is a stainless steel continuous band sealer, the 15 mm seal width version of the horizontal right-to-left feeding CBS-880I. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e15 mm Seal Width\u003c\/h3\u003e\u003cp\u003eThis variant ships from the factory with a 15 mm seal element instead of the standard 10 mm. The wider seal gives a stronger bond on thicker poly films, heavier laminates, and bags that need to survive shipping with sharp-cornered product inside. The seal is otherwise identical: PE, PP, and laminated foils are all compatible.\u003c\/p\u003e\u003ch3\u003eWhy a 15 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 15 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880I-15mm keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880I-15mm includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880I-15mm can be ordered with a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368531099933,"sku":"CBS-880I-15mm","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57405_CBS-880I-15mm-img-1.jpg?v=1780307259"},{"product_id":"sealer-sales-cbs-880i-30mm-horizontal-continuous-band-sealer-30mm-seal-width-for-hang-hole-bags-right-to-left-feed","title":"Sealer Sales CBS-880I-30mm Horizontal Continuous Band Sealer, 30mm Seal Width for Hang-Hole Bags, Right-to-Left Feed","description":"\u003cp\u003eThe Sealer Sales CBS-880I-30mm is a stainless steel continuous band sealer, the 30 mm wide seal version of the horizontal right-to-left feeding CBS-880I. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e30 mm Seal for Hang-Hole Bags\u003c\/h3\u003e\u003cp\u003eThe 30 mm seal width is specifically intended for bags with a punched hang-hole. With a 10 mm seal you have to choose between sealing above or below the hole; with the CBS-880I-30mm the seal lands wide enough to cover both above and below the hang-hole in a single pass, so the bag is fully closed and the hang-hole stays usable. The trade-off: this variant does not include an embossing wheel.\u003c\/p\u003e\u003ch3\u003eWhy a 30 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 30 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880I-30mm keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880I-30mm can be ordered with an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368537620765,"sku":"CBS-880I-30mm","price":1345.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57450_CBS-880I-30mm-img-1.jpg?v=1780307288"},{"product_id":"sealer-sales-cbs-880i-counter-horizontal-continuous-band-sealer-with-digital-counter-10mm-seal-right-to-left-feed","title":"Sealer Sales CBS-880I-counter Horizontal Continuous Band Sealer with Digital Counter, 10mm Seal, Right-to-Left Feed","description":"\u003cp\u003eThe Sealer Sales CBS-880I-counter is a stainless steel continuous band sealer, the horizontal right-to-left feeding CBS-880I with the factory-installed digital counter add-on. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003eDigital Counter for Production Tracking\u003c\/h3\u003e\u003cp\u003eThe CBS-880I-counter adds a digital counter to the standard CBS-880I. Each sealed bag increments the counter, so you can confirm batch counts at the end of a shift without manually tallying or pulling bags off a pallet to recount. Counter resets at the front panel.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880I-counter keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880I-counter includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880I-counter can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368547451165,"sku":"CBS-880I-counter","price":1017.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57420_CBS-880I-counter-img-1.jpg?v=1780307316"},{"product_id":"sealer-sales-cbs-880i-220v-horizontal-continuous-band-sealer-220v-type-a-plug-10mm-seal-right-to-left-feed","title":"Sealer Sales CBS-880I-220V Horizontal Continuous Band Sealer, 220V, Type A Plug, 10mm Seal, Right-to-Left Feed","description":"\u003cp\u003eThe Sealer Sales CBS-880I-220V is a stainless steel continuous band sealer, the 220V version of the horizontal right-to-left feeding CBS-880I for use outside the United States. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e220V Configuration with Type a Plug\u003c\/h3\u003e\u003cp\u003eThe CBS-880I-220V is factory-built for 220V \/ 50Hz mains operation, intended for installations outside the United States. Mechanical specs are identical to the standard CBS-880I. The only difference is the power supply, motor wiring, and the Type A plug. Order this version when the destination facility runs on European, Asian, or other 220V supply.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880I-220V keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880I-220V includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880I-220V can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs). These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368566980893,"sku":"CBS-880I-220V","price":897.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57435_CBS-880I-220V-img-1.jpg?v=1780307367"},{"product_id":"sealer-sales-cbs-880ii-horizontal-vertical-continuous-band-sealer-with-conversion-kit-10mm-seal-embossing","title":"Sealer Sales CBS-880II Horizontal\/Vertical Continuous Band Sealer with Conversion Kit, 10mm Seal, Embossing","description":"\u003cp\u003eThe Sealer Sales CBS-880II is a stainless steel continuous band sealer, the standard 10 mm version that ships horizontal and includes the vertical conversion kit. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 6.0\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880II includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368576942365,"sku":"CBS-880II","price":939.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57466_CBS-880II-img-1_6d693a5b-f44d-4497-80cd-91300b48fed2.jpg?v=1780307395"},{"product_id":"sealer-sales-cbs-880ii-100mm-horizontal-vertical-continuous-band-sealer-with-extended-vertical-height-11-16-5","title":"Sealer Sales CBS-880II-100mm Horizontal\/Vertical Continuous Band Sealer with Extended Vertical Height (11\" - 16.5\")","description":"\u003cp\u003eThe Sealer Sales CBS-880II-100mm is a stainless steel continuous band sealer, the CBS-880II with the extended vertical height kit installed. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003eExtended Vertical Bag Height (11\" to 16.5\")\u003c\/h3\u003e\u003cp\u003eThe standard CBS-880II vertical mode handles bags from 6.0\" to 12.0\" tall when filled. The CBS-880II-100mm factory-adds 100 mm (roughly 4\") of extra height to the conveyor uprights, taking the vertical bag-height range to 11\" to 16.5\". This matters when you're sealing taller filled bags (powder fills, larger granular product, anything that exceeds the standard 12\" filled height). The unit is otherwise identical to the standard CBS-880II. 10 mm seal width, embossing wheel, all standard hardware.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II-100mm keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-100mm ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of 11\" - 16.5\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-100mm includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II-100mm can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368583463197,"sku":"CBS-880II-100mm","price":1317.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57544_CBS-880II-100mm-img-1.jpg?v=1780307426"},{"product_id":"sealer-sales-cbs-880ii-15mm-horizontal-vertical-continuous-band-sealer-15mm-seal-width-with-vertical-conversion-kit","title":"Sealer Sales CBS-880II-15mm Horizontal\/Vertical Continuous Band Sealer, 15mm Seal Width, with Vertical Conversion Kit","description":"\u003cp\u003eThe Sealer Sales CBS-880II-15mm is a stainless steel continuous band sealer, the 15 mm seal width version that ships horizontal and includes the vertical conversion kit. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e15 mm Seal Width\u003c\/h3\u003e\u003cp\u003eSame chassis and dual-mode operation as the standard CBS-880II, but ships with a 15 mm seal element from the factory for thicker poly films and heavier laminates.\u003c\/p\u003e\u003ch3\u003eWhy a 15 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 15 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II-15mm keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-15mm ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 6.0\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-15mm includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II-15mm can be ordered with a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368593228061,"sku":"CBS-880II-15mm","price":1194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57493_CBS-880II-15mm-img-1.jpg?v=1780307454"},{"product_id":"sealer-sales-cbs-880ii-220v-horizontal-vertical-continuous-band-sealer-220v-type-a-plug","title":"Sealer Sales CBS-880II-220V Horizontal\/Vertical Continuous Band Sealer, 220V, Type A Plug","description":"\u003cp\u003eThe Sealer Sales CBS-880II-220V is a stainless steel continuous band sealer, the 220V version of the CBS-880II for use outside the United States. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e220V Configuration with Type A Plug\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-220V is factory-built for 220V \/ 50Hz mains operation, intended for installations outside the United States. Mechanical specs are identical to the standard CBS-880II. The only difference is the power supply, motor wiring, and the Type A plug.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II-220V keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-220V ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 6.0\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-220V includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II-220V can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs). These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368603025693,"sku":"CBS-880II-220V","price":996.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57527_CBS-880II-220V-img-1.jpg?v=1780307483"},{"product_id":"sealer-sales-cbs-880ii-30mm-horizontal-vertical-continuous-band-sealer-30mm-seal-for-hang-hole-bags","title":"Sealer Sales CBS-880II-30mm Horizontal\/Vertical Continuous Band Sealer, 30mm Seal for Hang-Hole Bags","description":"\u003cp\u003eThe Sealer Sales CBS-880II-30mm is a stainless steel continuous band sealer, the 30 mm wide seal version that ships horizontal and includes the vertical conversion kit. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003e30 mm Seal for Hang-Hole Bags\u003c\/h3\u003e\u003cp\u003eThe 30 mm seal width is intended for bags with a punched hang-hole. The seal lands wide enough to cover both above and below the hole in a single pass, so the bag closes fully and the hang-hole stays usable. Note: this variant does not include an embossing wheel.\u003c\/p\u003e\u003ch3\u003eWhy a 30 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 30 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II-30mm keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-30mm ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 6.0\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II-30mm can be ordered with an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368609546525,"sku":"CBS-880II-30mm","price":1444.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57561_CBS-880II-30mm-img-1.jpg?v=1780307510"},{"product_id":"sealer-sales-cbs-880ii-counter-horizontal-vertical-continuous-band-sealer-with-digital-counter","title":"Sealer Sales CBS-880II-counter Horizontal\/Vertical Continuous Band Sealer with Digital Counter","description":"\u003cp\u003eThe Sealer Sales CBS-880II-counter is a stainless steel continuous band sealer, the CBS-880II with the factory-installed digital counter add-on. The standard CBS-880 is one of the best-selling band sealers in its price class because it handles 20-30 6\" wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and has been in production long enough that the spare parts pipeline is mature.\u003c\/p\u003e\u003ch3\u003eDigital Counter for Production Tracking\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-counter adds a digital counter to the standard CBS-880II. Each sealed bag increments the counter, so you can confirm batch counts at the end of a shift without manually tallying. Counter resets at the front panel.\u003c\/p\u003e\u003ch3\u003eWhy a 10 mm Seal Width Matters\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films without wasting bag material. The CBS-880II-counter keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you don't pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe CBS-880 has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer. Mean time between belt changes depends on bag thickness and dwell, but field reports of multiple months on a single belt are common.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-counter ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 6.0\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that won't stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe CBS-880II-counter includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the CBS-880II-counter can be ordered with alternate seal widths of 15 mm or 30 mm, a smooth or serrated seal wheel in place of the embossing wheel, a stainless steel floor stand (horizontal units only), a wider 12\" conveyor table for larger packages (max load 2.2 lbs), 220V operation for use outside the United States. These options are factory-fitted when you place the order. The CBS-880 spec sheet shows the full menu of supported configurations.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51368619311389,"sku":"CBS-880II-counter","price":1116.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57510_CBS-880II-counter-img-1.jpg?v=1780307540"},{"product_id":"sealer-sales-fr-770i-horizontal-continuous-band-sealer-10mm-seal-left-to-right-feed-embossing-0-630-in-min-22-lb-max-load","title":"Sealer Sales FR-770I Horizontal Continuous Band Sealer, 10mm Seal, Left-to-Right Feed, Embossing, 0-630 in\/min, 22 lb Max Load","description":"\u003cp\u003eThe Sealer Sales FR-770I is a stainless steel continuous band sealer, the standard 10 mm horizontal left-to-right feeding version. The FR-770 is one of the most popular band sealers in its class because it handles 20 to 26 six-inch wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and feeds left to right (the mirror configuration of the right-feed CBS-880 family). Stainless construction and a long spare-parts pipeline make it a workhorse you can keep in service for years.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed\u003c\/h3\u003e\u003cp\u003eThe FR-770I is the left-feed version of the FR-770 chassis. The operator stands at the left side of the conveyor and bags exit to the right. This is the mirror configuration of the right-feed CBS-880 family. Match feed direction to your production line layout so the operator does not have to reach across the conveyor.\u003c\/p\u003e\u003ch3\u003e10 mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films. The FR-770I keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you do not pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe FR-770 family has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe FR-770I includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the FR-770I can be ordered with an alternate 15 mm seal width, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), an extended vertical height kit raising filled bag range to 12-16 inches (vertical units only). These options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51379386581277,"sku":"FR-770I","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57599_FR-770I-img-1_d63bfacd-e94a-4619-b9fb-12dbe4c66885.jpg?v=1780307598"},{"product_id":"sealer-sales-fr-770i-counter-horizontal-continuous-band-sealer-with-digital-counter-10mm-seal-left-to-right-feed","title":"Sealer Sales FR-770I-counter Horizontal Continuous Band Sealer with Digital Counter, 10mm Seal, Left-to-Right Feed","description":"\u003cp\u003eThe Sealer Sales FR-770I-counter is a stainless steel continuous band sealer, the horizontal left-to-right feeding FR-770I with the factory-installed digital counter add-on. The FR-770 is one of the most popular band sealers in its class because it handles 20 to 26 six-inch wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and feeds left to right (the mirror configuration of the right-feed CBS-880 family). Stainless construction and a long spare-parts pipeline make it a workhorse you can keep in service for years.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed\u003c\/h3\u003e\u003cp\u003eThe FR-770I-counter is the left-feed version of the FR-770 chassis. The operator stands at the left side of the conveyor and bags exit to the right. This is the mirror configuration of the right-feed CBS-880 family. Match feed direction to your production line layout so the operator does not have to reach across the conveyor.\u003c\/p\u003e\u003ch3\u003e10 mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films. The FR-770I-counter keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you do not pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe FR-770 family has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer.\u003c\/p\u003e\u003ch3\u003eDigital Counter for Production Tracking\u003c\/h3\u003e\u003cp\u003eThe FR-770I-counter adds a factory-installed digital counter to the standard FR-770I. Each sealed bag increments the counter so you can confirm batch counts at the end of a shift without manually tallying or pulling bags off a pallet to recount. The counter resets at the front panel.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe FR-770I-counter includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the FR-770I-counter can be ordered with an alternate 15 mm seal width, a smooth or serrated seal wheel in place of the embossing wheel, a stainless steel floor stand (horizontal units only), an extended vertical height kit raising filled bag range to 12-16 inches (vertical units only). These options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51379390972189,"sku":"FR-770I-counter","price":1189.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57605_FR-770I-counter-img-1_568d4769-807e-42e5-b845-cc8968c0bcff.jpg?v=1780307614"},{"product_id":"sealer-sales-fr-770ii-horizontal-vertical-continuous-band-sealer-with-conversion-kit-10mm-seal-left-to-right-feed-embossing","title":"Sealer Sales FR-770II Horizontal\/Vertical Continuous Band Sealer with Conversion Kit, 10mm Seal, Left-to-Right Feed, Embossing","description":"\u003cp\u003eThe Sealer Sales FR-770II is a stainless steel continuous band sealer, the dual-mode version that ships horizontal and includes the vertical conversion kit. The FR-770 is one of the most popular band sealers in its class because it handles 20 to 26 six-inch wide poly bags per minute, accepts almost any thermoplastic film (PE, PP, laminated foils), and feeds left to right (the mirror configuration of the right-feed CBS-880 family). Stainless construction and a long spare-parts pipeline make it a workhorse you can keep in service for years.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed\u003c\/h3\u003e\u003cp\u003eThe FR-770II is the left-feed version of the FR-770 chassis. The operator stands at the left side of the conveyor and bags exit to the right. This is the mirror configuration of the right-feed CBS-880 family. Match feed direction to your production line layout so the operator does not have to reach across the conveyor.\u003c\/p\u003e\u003ch3\u003e10 mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eA 10 mm seal is wide enough to give a hermetic, peel-resistant bond on most poly films. The FR-770II keeps the seal bars at their target temperature with a solid-state temperature controller, so the first bag of the run looks identical to the last bag. Temperature drift is what causes intermittent leakers, and a solid-state controller is what stops it.\u003c\/p\u003e\u003ch3\u003eBuilt for Daily Production\u003c\/h3\u003e\u003cp\u003eFrame is stainless steel for washdown environments. The conveyor is motorized rubber with variable speed control. Knurled pressure wheels adjust to compensate for film thickness so a 4 mil bag closes with the same dwell as a 2 mil bag. One pair each of cooling and heating blocks means the bag is fully cooled before it exits the conveyor, so you do not pull a hot, still-relaxing seal that distorts on the way out. An emergency stop is wired into the front panel.\u003c\/p\u003e\u003ch3\u003eSpare Parts and Field Service\u003c\/h3\u003e\u003cp\u003eThe FR-770 family has been in production long enough that the spare parts kit is well stocked: PTFE sealing belt, drive belt, PC board, tools, and the standard typeset (numbers 0-9 plus letters EXD). Most operators keep one belt and one drive belt in a drawer next to the sealer.\u003c\/p\u003e\u003ch3\u003eShips Horizontal, Converts to Vertical with the Included Kit\u003c\/h3\u003e\u003cp\u003eThe FR-770II ships in horizontal configuration but includes the conversion kit to switch to vertical. In vertical mode the conveyor stands the bag upright and is sized for filled-bag heights of Min 7.8\" \/ Max 12.0\". Vertical mode is what you want for sealing bags of powder, granular product, or anything else that will not stay flat on a horizontal conveyor.\u003c\/p\u003e\u003ch3\u003eEmbossing on the Seal Line\u003c\/h3\u003e\u003cp\u003eThe FR-770II includes an embossing wheel that stamps your text directly onto the seal line without ink. Standard character size is 3 x 4 x 9 mm and the optional embossing layout is one line in three sections, fifteen characters per section. The wheel can be swapped for a smooth seal if you prefer no marking, or a serrated seal for grip. None of this requires ribbons, ink, or wet supplies. Embossing is purely mechanical.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eFor facilities that need more than the standard configuration, the FR-770II can be ordered with an alternate 15 mm seal width, a smooth or serrated seal wheel in place of the embossing wheel, an integrated digital counter to track sealed bag count, a stainless steel floor stand (horizontal units only), an extended vertical height kit raising filled bag range to 12-16 inches (vertical units only). These options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51379392479517,"sku":"FR-770II","price":1169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/57611_FR-770II-img-1_088f3bbf-f226-405e-a00c-fdfd6de520fc.jpg?v=1780307630"},{"product_id":"sealer-sales-frm-1010i-horizontal-band-sealer-with-dry-ink-coding-15mm-seal-width-right-feed","title":"Sealer Sales FRM-1010I Horizontal Band Sealer with Dry Ink Coding, 15mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales FRM-1010I is an Impresse-series horizontal continuous band sealer with a 15mm wide seal, integrated dry-ink coding station, and stainless steel construction. The motorized rubber conveyor runs at up to 472 inches per minute with constant direct-heat seal bars and paired cooling\/heating blocks for repeatable seals on poly bags, laminated foils, and similar flexible packaging films. Right-to-left feed direction matches operator-on-the-right line layouts.\u003c\/p\u003e\u003ch3\u003e15mm Wide Seal for Stronger Bond on Production-Run Films\u003c\/h3\u003e\u003cp\u003eThe 15mm seal width is wider than the 10mm seal on lighter-duty band sealers, which gives a stronger, more peel-resistant bond on production-grade poly bags. The extra width matters when the bag is going to be handled multiple times before reaching the customer (warehouse, distribution, retail) and the seal needs to survive every handoff. The 20mm seal width variant is available for even heavier handling cycles.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502861549853,"sku":"FRM-1010I","price":2658.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58326_FRM-1010I-1.jpg?v=1780308598"},{"product_id":"sealer-sales-frm-1010i-20mm-horizontal-band-sealer-with-dry-ink-coding-20mm-seal-width-right-feed","title":"Sealer Sales FRM-1010I-20mm Horizontal Band Sealer with Dry Ink Coding, 20mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales FRM-1010I-20mm is the wide-seal variant of the FRM-1010I Impresse-series horizontal continuous band sealer, with a 20mm wide seal, integrated dry-ink coding station, and stainless steel construction. The motorized rubber conveyor runs at up to 472 inches per minute with constant direct-heat seal bars and paired cooling\/heating blocks for production runs on heavier-gauge film or thicker filled bags. Right-to-left feed direction matches operator-on-the-right line layouts.\u003c\/p\u003e\u003ch3\u003e20mm Wide Seal for Heavy-Gauge Film and Filled Bags\u003c\/h3\u003e\u003cp\u003eThe 20mm seal width is wider than both the 10mm and 15mm seals on lighter-duty band sealers. The extra width is what you want when sealing heavy-gauge film (4 mil and up), when the bag is going to be loaded with dense or heavy contents, or when the seal needs to survive cold-chain handling that can stress the film. A 20mm seal also tolerates more film thickness variation across the bag width, which helps with hand-loaded or irregularly filled product.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862008605,"sku":"FRM-1010I-20mm","price":3363.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58330_FRM-1010I-20mm-1.jpg?v=1780308614"},{"product_id":"sealer-sales-frm-1010ii-vertical-band-sealer-with-dry-ink-coding-15mm-seal-width-right-feed","title":"Sealer Sales FRM-1010II Vertical Band Sealer with Dry Ink Coding, 15mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales FRM-1010II is the vertical-orientation variant of the FRM-1010 Impresse-series continuous band sealer, with a 15mm wide seal, integrated dry-ink coding station, and stainless steel construction. The vertical seal head keeps filled bags upright while the top of the bag passes through the seal bars, so liquids, powders, and granular contents stay settled to the bottom of the bag rather than spilling or migrating into the seal area.\u003c\/p\u003e\u003ch3\u003eVertical Configuration for Liquid, Powder, and Granular Fill\u003c\/h3\u003e\u003cp\u003eThe vertical configuration accepts filled bags from 7.8\" minimum to 12.0\" maximum height. The bag travels upright through the seal head, which means the operator can pre-fill the bag before sealing without worrying about contents spilling or shifting. This is what makes the FRM-1010II the right choice for sealing bags of liquid (sauces, detergents, motor oil), powders (coffee, supplements, flour), and granular product (rice, nuts, pet food).\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862041373,"sku":"FRM-1010II","price":3070.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58334_FRM-1010II-1.jpg?v=1780308632"},{"product_id":"sealer-sales-frm-1120c-horizontal-tilt-head-band-sealer-with-dry-ink-coding-10mm-seal-width-right-feed","title":"Sealer Sales FRM-1120C Horizontal Tilt-Head Band Sealer with Dry Ink Coding, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales FRM-1120C is a medium-duty horizontal band sealer with a tilting seal head, 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The seal head pivots up to 30 degrees, which lets the unit accommodate liquid-filled bags and irregular product profiles without spilling or hanging the bag against the conveyor. The motorized rubber conveyor runs at up to 394 inches per minute with a 100W motor.\u003c\/p\u003e\u003ch3\u003eTilting Seal Head Pivots Up to 30 Degrees\u003c\/h3\u003e\u003cp\u003eThe tilting seal head is the differentiator on this unit. By pivoting the seal head up to 30 degrees, the operator can run filled bags through at an angle that keeps liquid contents settled at the bottom of the bag rather than rushing up into the seal area as the bag enters the conveyor. The same angle helps with irregular pack shapes where a vertical seal would hang the bag or smear the seal line.\u003c\/p\u003e\u003ch3\u003e10mm Seal Width for Medium-Duty Production\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is the production standard for medium-duty work - wide enough for a strong bond on most poly films, narrow enough that the seal bars do not need a heavy power draw. Combined with the tilting head, this configuration handles the awkward seal jobs (liquid-filled, irregular profile) that a fixed-head sealer would struggle with.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862303517,"sku":"FRM-1120C","price":3847.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58338_FRM-1120C-1.jpg?v=1780308646"},{"product_id":"sealer-sales-hl-m810i-horizontal-band-sealer-with-dry-ink-coding-10mm-seal-width-left-feed","title":"Sealer Sales HL-M810I Horizontal Band Sealer with Dry Ink Coding, 10mm Seal Width, Left Feed","description":"\u003cp\u003eThe Sealer Sales HL-M810I is a horizontal continuous band sealer with a 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The motorized rubber conveyor runs at up to 630 inches per minute with constant direct-heat seal bars and paired cooling\/heating blocks. This is the higher-speed alternative to the larger M1120LD models, sized for high-volume operations sealing standard poly bags.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds left to right. The operator stands at the left side of the conveyor and finished bags exit on the right. Pick the feed direction that matches your line layout so the operator does not have to reach across the conveyor or walk around the unit between cycles.\u003c\/p\u003e\u003ch3\u003e10mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is the production standard for poly bag sealing - wide enough to give a strong, hermetic bond without needing heavy bars or extended dwell. A solid-state controller holds the bars at setpoint regardless of how many bags have run through, so the last bag of the shift looks identical to the first bag.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862369053,"sku":"HL-M810I","price":1716.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58342_HL-M810I-1.jpg?v=1780308660"},{"product_id":"sealer-sales-hl-m810i-counter-horizontal-band-sealer-with-dry-ink-coding-and-counter-10mm-seal-width-left-feed","title":"Sealer Sales HL-M810I-counter Horizontal Band Sealer with Dry Ink Coding and Counter, 10mm Seal Width, Left Feed","description":"\u003cp\u003eThe Sealer Sales HL-M810I is a horizontal continuous band sealer with a 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The motorized rubber conveyor runs at up to 630 inches per minute with constant direct-heat seal bars and paired cooling\/heating blocks. This is the higher-speed alternative to the larger M1120LD models, sized for high-volume operations sealing standard poly bags.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds left to right. The operator stands at the left side of the conveyor and finished bags exit on the right. Pick the feed direction that matches your line layout so the operator does not have to reach across the conveyor or walk around the unit between cycles.\u003c\/p\u003e\u003ch3\u003e10mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is the production standard for poly bag sealing - wide enough to give a strong, hermetic bond without needing heavy bars or extended dwell. A solid-state controller holds the bars at setpoint regardless of how many bags have run through, so the last bag of the shift looks identical to the first bag.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eIntegrated Bag Counter\u003c\/h3\u003e\u003cp\u003eAn integrated counter on the front panel displays the running count of sealed bags. This is the variant for operations that need to track production count per shift, audit order quantities at pack-out, or trigger a tray change after a fixed bag count. The counter resets at the press of a button.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862401821,"sku":"HL-M810I-counter","price":1842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58346_HL-M810I-counter-1.jpg?v=1780308674"},{"product_id":"sealer-sales-hl-m810i-rtol-horizontal-band-sealer-with-dry-ink-coding-10mm-seal-width-right-feed","title":"Sealer Sales HL-M810I RtoL Horizontal Band Sealer with Dry Ink Coding, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales HL-M810I is a horizontal continuous band sealer with a 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The motorized rubber conveyor runs at up to 630 inches per minute with constant direct-heat seal bars and paired cooling\/heating blocks. This is the higher-speed alternative to the larger M1120LD models, sized for high-volume operations sealing standard poly bags.\u003c\/p\u003e\u003ch3\u003eRight-to-Left Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds right to left, which is the mirror layout of the standard configuration. The operator stands at the right side of the conveyor and finished bags exit on the left. Pick the feed direction that matches your line layout so the operator does not have to reach across the conveyor or walk around the unit between cycles.\u003c\/p\u003e\u003ch3\u003e10mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is the production standard for poly bag sealing - wide enough to give a strong, hermetic bond without needing heavy bars or extended dwell. A solid-state controller holds the bars at setpoint regardless of how many bags have run through, so the last bag of the shift looks identical to the first bag.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e\u003ch3\u003eEmergency Stop and Operator Safety\u003c\/h3\u003e\u003cp\u003eAn emergency stop button is wired into the front panel and shuts down the conveyor and seal bars in one push. The seal bars are guarded from accidental contact at the entry and exit, and the conveyor has thermal overload protection so a jammed bag does not damage the motor. These are baseline safety features for continuous-band production but worth noting because they are what makes the unit safe to leave running with a single operator at the bench.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502862991645,"sku":"HL-M810I_RtoL","price":1716.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58350_HL-M810I_RtoL-1.jpg?v=1780308688"},{"product_id":"sealer-sales-hl-m810ii-vertical-band-sealer-with-dry-ink-coding-10mm-seal-width-left-feed","title":"Sealer Sales HL-M810II Vertical Band Sealer with Dry Ink Coding, 10mm Seal Width, Left Feed","description":"\u003cp\u003eThe Sealer Sales HL-M810II is the vertical-orientation continuous band sealer with a 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The vertical seal head keeps filled bags upright while the top of the bag passes through the seal bars, so liquids, powders, and granular contents stay settled to the bottom of the bag.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds left to right. The operator stands at the left side of the conveyor and finished bags exit on the right.\u003c\/p\u003e\u003ch3\u003eVertical Configuration for Liquid, Powder, and Granular Fill\u003c\/h3\u003e\u003cp\u003eThe vertical configuration accepts filled bags from 7.8\" minimum to 12.0\" maximum height. The bag travels upright through the seal head, which means the operator can pre-fill the bag before sealing without worrying about contents spilling or shifting. This is what makes the M810II the right choice for sealing bags of liquid (sauces, detergents), powders (coffee, supplements), and granular product (rice, nuts).\u003c\/p\u003e\u003ch3\u003e10mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is wide enough for a strong, hermetic bond on most poly films. The solid-state controller holds the seal bars at setpoint regardless of how many bags have passed through, so the last bag of the shift looks identical to the first bag.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502863057181,"sku":"HL-M810II","price":1990.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58354_HL-M810II-1.jpg?v=1780308701"},{"product_id":"sealer-sales-hl-m810ii-rtol-vertical-band-sealer-with-dry-ink-coding-10mm-seal-width-right-feed","title":"Sealer Sales HL-M810II RtoL Vertical Band Sealer with Dry Ink Coding, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales HL-M810II is the vertical-orientation continuous band sealer with a 10mm seal width, integrated dry-ink coding station, and stainless steel construction. The vertical seal head keeps filled bags upright while the top of the bag passes through the seal bars, so liquids, powders, and granular contents stay settled to the bottom of the bag.\u003c\/p\u003e\u003ch3\u003eRight-to-Left Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds right to left, the mirror layout of the standard configuration. The operator stands at the right side of the conveyor and finished bags exit on the left.\u003c\/p\u003e\u003ch3\u003eVertical Configuration for Liquid, Powder, and Granular Fill\u003c\/h3\u003e\u003cp\u003eThe vertical configuration accepts filled bags from 7.8\" minimum to 12.0\" maximum height. The bag travels upright through the seal head, which means the operator can pre-fill the bag before sealing without worrying about contents spilling or shifting. This is what makes the M810II the right choice for sealing bags of liquid (sauces, detergents), powders (coffee, supplements), and granular product (rice, nuts).\u003c\/p\u003e\u003ch3\u003e10mm Seal Width with Solid-State Temperature Control\u003c\/h3\u003e\u003cp\u003eThe 10mm seal width is wide enough for a strong, hermetic bond on most poly films. The solid-state controller holds the seal bars at setpoint regardless of how many bags have passed through, so the last bag of the shift looks identical to the first bag.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502863352093,"sku":"HL-M810II_RtoL","price":1990.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58358_HL-M810II_RtoL-1.jpg?v=1780308713"},{"product_id":"sealer-sales-hl-m1120ld-vertical-band-sealer-with-dry-ink-coding-and-adjustable-sealing-head-10mm-seal-width-right-feed","title":"Sealer Sales HL-M1120LD Vertical Band Sealer with Dry Ink Coding and Adjustable Sealing Head, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales HL-M1120LD is a heavy-duty vertical continuous band sealer with an adjustable sealing head, adjustable conveyor belt height, integrated dry-ink coding station, 10mm seal width, and 1\/3 HP (230W) motor. The adjustable head and belt height together accept a wider range of filled bag sizes than the fixed-head M810II series. Sized for medium to heavy-duty production on liquid-filled or larger pack profiles.\u003c\/p\u003e\u003ch3\u003eAdjustable Sealing Head and Conveyor Belt Height\u003c\/h3\u003e\u003cp\u003eThe sealing head and conveyor belt both adjust in height, which is the difference between this unit and the fixed-geometry M810II. A taller pack runs through with the head raised; a shorter pack runs through with the head lowered. The conveyor belt drops to give the operator clearance for awkward fills. This means one unit handles a wider product range without the operator having to swap fixtures.\u003c\/p\u003e\u003ch3\u003eRight-to-Left Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds right to left. The operator stands at the right side of the conveyor and finished bags exit on the left.\u003c\/p\u003e\u003ch3\u003e1\/3 HP Motor for Heavy-Duty Production\u003c\/h3\u003e\u003cp\u003eThe 1\/3 HP (230W) motor is roughly 4.5x the power of the 50W motor on the M810 series. It is what makes this unit sustainable across multi-shift production runs with heavier filled bags. Sealing speed is 394 inches per minute, lower than the M810s but the unit is sized for heavier per-bag work rather than maximum bag count per minute.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502863417629,"sku":"HL-M1120LD","price":4740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58362_HL-M1120LD-1.jpg?v=1780308728"},{"product_id":"sealer-sales-hl-m1120ld-ltor-vertical-band-sealer-with-dry-ink-coding-and-adjustable-sealing-head-10mm-seal-width-left-feed","title":"Sealer Sales HL-M1120LD-LtoR Vertical Band Sealer with Dry Ink Coding and Adjustable Sealing Head, 10mm Seal Width, Left Feed","description":"\u003cp\u003eThe Sealer Sales HL-M1120LD is a heavy-duty vertical continuous band sealer with an adjustable sealing head, adjustable conveyor belt height, integrated dry-ink coding station, 10mm seal width, and 1\/3 HP (230W) motor. The adjustable head and belt height together accept a wider range of filled bag sizes than the fixed-head M810II series. Sized for medium to heavy-duty production on liquid-filled or larger pack profiles.\u003c\/p\u003e\u003ch3\u003eAdjustable Sealing Head and Conveyor Belt Height\u003c\/h3\u003e\u003cp\u003eThe sealing head and conveyor belt both adjust in height, which is the difference between this unit and the fixed-geometry M810II. A taller pack runs through with the head raised; a shorter pack runs through with the head lowered. The conveyor belt drops to give the operator clearance for awkward fills. This means one unit handles a wider product range without the operator having to swap fixtures.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds left to right. The operator stands at the left side of the conveyor and finished bags exit on the right.\u003c\/p\u003e\u003ch3\u003e1\/3 HP Motor for Heavy-Duty Production\u003c\/h3\u003e\u003cp\u003eThe 1\/3 HP (230W) motor is roughly 4.5x the power of the 50W motor on the M810 series. It is what makes this unit sustainable across multi-shift production runs with heavier filled bags. Sealing speed is 394 inches per minute, lower than the M810s but the unit is sized for heavier per-bag work rather than maximum bag count per minute.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with a pair each of cooling and heating blocks behind them. The heating block brings the bag film to seal temperature and the cooling block sets the seal before the bag exits the conveyor, so the operator is not pulling a hot, still-relaxing seal that distorts on the way out. The solid-state temperature controller holds the bars at the set point regardless of how many bags have passed through, which is what stops the intermittent-leaker problem that takes most band sealers out of spec by mid-shift.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Variable Speed Control\u003c\/h3\u003e\u003cp\u003eThe conveyor is a motorized rubber belt with variable speed control, so the operator can dial in the dwell time for the film gauge and bag profile being run. Knurled pressure rolls above the conveyor adjust independently so a heavy filled bag gets enough pressure on the seal bars while a light empty bag does not get crushed. The whole conveyor is fully adjustable, meaning both height and depth relative to the seal bars, so the operator can center the seal on any bag size from small portion packs up to the maximum bag the configuration handles.\u003c\/p\u003e\u003ch3\u003eDry-Ink Coding Station on the Seal Line\u003c\/h3\u003e\u003cp\u003eAn integrated dry-ink coding station prints lot or date code directly onto the seal line as the bag passes through. The typeset is changed by swapping the printing wheel, so the operator can switch codes for a new run without re-tooling. Common configurations use 18PT type for product code, expiration date, or batch lot. The ink reservoir holds enough ink for thousands of cycles before refill, and the print head can be disabled if the operator does not want coding on a particular run.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Spare Parts\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel, which holds up to wipe-down cleaning, ambient moisture in food and beverage production rooms, and the day-in day-out vibration of continuous-band operation. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, silica gel ring, silicone pin, and tools. Most operators keep one PTFE belt and one wheel belt in a drawer next to the sealer because those are the wear items that turn over fastest.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502863450397,"sku":"HL-M1120LD-LtoR","price":4740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58366_HL-M1120LD-LtoR-1.jpg?v=1780308742"},{"product_id":"sealer-sales-hlc-1120ld-vertical-band-sealer-with-dry-ink-coding-adjustable-sealing-head-and-trimmer-10mm-seal-width-right-feed","title":"Sealer Sales HLC-1120LD Vertical Band Sealer with Dry Ink Coding, Adjustable Sealing Head, and Trimmer, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales HLC-1120LD is a heavy-duty vertical continuous band sealer with an adjustable sealing head, adjustable conveyor belt height, integrated material trimmer, dry-ink coding station, and 10mm seal width. The trimmer is the differentiating feature: as the bag passes through, excess film above the seal line is cut and removed in one motion, leaving a flush trim line at the top edge. Sized for medium to heavy-duty production on over-bagged or liquid-filled product.\u003c\/p\u003e\u003ch3\u003eIntegrated Material Trimmer at the Seal Line\u003c\/h3\u003e\u003cp\u003eThe trimmer cuts excess film or material above the seal line as the bag passes through the conveyor, leaving a clean flush edge at the top of the sealed bag. This is what makes the HLC-1120LD the right choice for over-bagging operations (a product already in primary packaging gets a secondary outer bag) and for filled bags where the top of the bag has excess material that would otherwise need to be trimmed by hand. The trim scrap drops away into a catch bin under the head.\u003c\/p\u003e\u003ch3\u003eAdjustable Sealing Head and Conveyor Belt Height\u003c\/h3\u003e\u003cp\u003eThe sealing head and conveyor belt both adjust in height, which is what makes one unit handle a wide range of bag sizes. A taller pack runs through with the head raised; a shorter pack runs through with the head lowered. The conveyor belt drops to give the operator clearance for awkward fills.\u003c\/p\u003e\u003ch3\u003eVertical Configuration for Liquid and Filled Bags\u003c\/h3\u003e\u003cp\u003eThe vertical configuration keeps filled bags upright while the top of the bag passes through the seal head and trimmer. Liquids, powders, and granular contents stay settled to the bottom of the bag rather than rushing up into the seal area. This is what makes the unit work for bags of sauces, detergents, liquid soaps, or any pre-filled product where settle-before-seal matters.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe seal bars run on constant direct heat, with paired cooling and heating blocks. The heating block brings the film to seal temperature; the cooling block sets the seal before the bag exits the conveyor. A solid-state digital temperature controller holds the bars at the set point through long production runs.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Knurled Pressure Wheels\u003c\/h3\u003e\u003cp\u003eThe motorized rubber conveyor runs at variable speed so the operator can dial in dwell time for the film and bag profile. Knurled pressure wheels above the conveyor adjust pressure independently so heavy filled bags get enough pressure on the seal bars while light empty bags do not get crushed.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction with Field-Service Parts Kit\u003c\/h3\u003e\u003cp\u003eThe housing and major chassis components are stainless steel. The manufacturer ships a spare parts kit with every unit including PC board, PTFE belt, wheel belt, fuses, motor brush, heating element, and silica gel ring. Emergency stop button on the panel. Right-to-left feed direction (left-feed available as a factory option).\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502978466077,"sku":"HLC-1120LD","price":5325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58370_HLC-1120LD-1_992095ad-2e27-4336-a801-59b1818aa769.jpg?v=1780308755"},{"product_id":"sealer-sales-hrs-255-rotary-band-sealer-12mm-seal-width-left-feed","title":"Sealer Sales HRS-255 Rotary Band Sealer, 12mm Seal Width, Left Feed","description":"\u003cp\u003eThe Sealer Sales HRS-255 is a compact rotary continuous band sealer designed specifically for sealing paper-plastic, tyvek, and foil packages. Variable temperature control reaches 572°F (300°C) with a 30-second warm-up time, the unit runs at up to 393 inches per minute, and the rotary band design feeds bags through quietly enough for a manned packing bench. Net weight is 46 lbs with hidden side handles for transport between workstations.\u003c\/p\u003e\u003ch3\u003eBuilt for Paper-Plastic, Tyvek, and Foil Packages\u003c\/h3\u003e\u003cp\u003eThe HRS-255 is purpose-built for medical and lab-grade pouch sealing. Paper-plastic, tyvek, and foil packages need higher seal temperatures than standard poly bags (paper coatings activate at 300°F+, tyvek requires fast localized heat to seal the polymer coating without scorching the substrate). The 572°F maximum temperature and fast warm-up are what make this unit work for those materials where a standard 482°F band sealer would either fail to seal or underseal.\u003c\/p\u003e\u003ch3\u003e30-Second Warm-Up to Operating Temperature\u003c\/h3\u003e\u003cp\u003eWarm-up time from cold is approximately 30 seconds to 356°F (180°C). That means the operator can power the unit on at the start of a packing run and have it ready before the first batch of pouches arrives at the bench. Most band sealers need 3-5 minutes to reach operating temperature.\u003c\/p\u003e\u003ch3\u003eRotary Band Design for Quiet Operation\u003c\/h3\u003e\u003cp\u003eThe rotary band design uses rotating bands rather than a reciprocating press to draw the pouch through the seal head. The result is quiet enough for the unit to live on a manned packing bench in a medical kitting room or food lab without operator complaints about noise. Sealing speed is 393 inches per minute (10 meters per minute) at full speed.\u003c\/p\u003e\u003ch3\u003eCompact Footprint with Hidden Handles\u003c\/h3\u003e\u003cp\u003eThe unit measures 20\" x 11\" x 7\" and weighs 46 lbs. Hidden side handles let the operator pick the unit up and move it between workstations without finding a separate cart. The max pouch weight on the conveyor is 2.2 lbs (1 kg), sized for typical medical and lab pouch packaging rather than industrial bag-and-fill applications.\u003c\/p\u003e\u003ch3\u003eVariable Temperature Control\u003c\/h3\u003e\u003cp\u003eVariable temperature control from 0 to 572°F (0 to 300°C) gives the operator a wide range to dial in for the substrate being sealed. Paper-coated pouches seal in the 300-400°F range; tyvek pouches in the 400-500°F range; foil-laminated pouches at the upper end. The controller holds temperature stable through long runs.\u003c\/p\u003e\u003ch3\u003eLeft-to-Right Feed Direction\u003c\/h3\u003e\u003cp\u003eThe unit feeds left to right. The operator inserts the pouch on the left, the rotating bands draw it through the heated seal head, and the sealed pouch exits on the right.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502978662685,"sku":"HRS-255","price":2190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58374_HRS-255-1_d791797f-c2a4-4354-9380-4d434be71ab2.jpg?v=1780308766"},{"product_id":"sealer-sales-hr-mv980zq-horizontal-band-sealer-with-dry-ink-coding-vacuum-and-gas-flush-10mm-seal-width-right-feed","title":"Sealer Sales HR-MV980ZQ Horizontal Band Sealer with Dry Ink Coding, Vacuum, and Gas Flush, 10mm Seal Width, Right Feed","description":"\u003cp\u003eThe Sealer Sales HR-MV980ZQ is a horizontal continuous band sealer with an integrated 1\/3-HP nozzle-type vacuum pump, gas-flush capability, tilting seal head, dry-ink coding station, and 10mm seal width. The unit handles vacuum packaging or modified-atmosphere (gas-flush) packaging on a continuous-band line rather than the batch-cycle chamber format. Vacuum and gas flush operate as alternate modes rather than simultaneously.\u003c\/p\u003e\u003ch3\u003eNozzle-Type Vacuum with Integrated 1\/3 HP Pump\u003c\/h3\u003e\u003cp\u003eA nozzle inserts into the open mouth of the bag as it enters the conveyor. The integrated 1\/3 HP pump evacuates the bag, the nozzle withdraws, and the seal bars close the bag in one continuous motion. The pump is sized to evacuate poly bags up to standard production-bag volumes; for larger bags or higher-vacuum requirements, a chamber sealer is the right tool, but for production-volume oxygen reduction this band-sealer-plus-nozzle configuration is faster per bag.\u003c\/p\u003e\u003ch3\u003eGas-Flush Capability for Modified-Atmosphere Packaging\u003c\/h3\u003e\u003cp\u003eThe same nozzle delivers inert gas (typically nitrogen) into the bag instead of evacuating it, replacing the atmosphere inside the bag with a non-reactive fill. This is the standard approach for coffee, snack food, supplement, and electronics packaging where oxygen sensitivity matters but a hard vacuum would crush the product. Vacuum and gas flush are alternate modes; the operator selects one or the other for the run.\u003c\/p\u003e\u003ch3\u003eTilting Seal Head for Liquid and Irregular Profiles\u003c\/h3\u003e\u003cp\u003eThe seal head pivots up to 30 degrees, which lets the unit accommodate liquid-filled bags and irregular product profiles without spilling or hanging the bag against the conveyor. Pair the tilt with the vacuum or gas-flush function to do MAP packaging on filled liquid bags without the contents migrating into the seal area.\u003c\/p\u003e\u003ch3\u003eConstant Direct-Heat Sealing with Cooling and Heating Blocks\u003c\/h3\u003e\u003cp\u003eThe 10mm seal bars run on constant direct heat with paired cooling and heating blocks behind them. The heating block brings the film to seal temperature; the cooling block sets the seal before the bag exits the conveyor. A solid-state digital temperature controller holds the bars at the set point through long production runs.\u003c\/p\u003e\u003ch3\u003eMotorized Rubber Conveyor with Knurled Pressure Rolls\u003c\/h3\u003e\u003cp\u003eThe motorized rubber conveyor runs at variable speed for film and bag tuning. Knurled pressure rolls above the conveyor adjust independently so the seal pressure compensates for film thickness and bag fill weight. Right-to-left feed direction.\u003c\/p\u003e\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless steel housing for daily packaging-room use. Dry-ink coding station on the seal line for lot or date code. The unit is sized for vacuum or gas-flush packaging runs that previously required a chamber sealer batch process, with the throughput advantage of a continuous-band design.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502978793757,"sku":"HR-MV980ZQ","price":3750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/59001_HR-MV980ZQ-image1_3ccf0d05-17a6-40fc-9f87-02509c3b76c3.jpg?v=1780562310"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/collections\/band_sealers_hero.jpg?v=1781520217","url":"https:\/\/thechefstore.com\/collections\/band-sealers.oembed","provider":"TheChefStore.Com","version":"1.0","type":"link"}