{"title":"Jet-Tech","description":"\u003cp\u003eJet-Tech manufactures commercial warewashing equipment for restaurants, bars, hotels, schools, and institutional kitchens that require dependable cleaning performance and efficient operation. The brand is widely recognized for Jet-Tech dishwasher systems including the Jet-Tech EV18, Jet-Tech F-18DP, Jet-Tech F-16DP, Jet-Tech EV22, Jet-Tech 747HH, and Jet-Tech 757-E models used in high-volume foodservice environments. Jet-Tech warewashing equipment includes undercounter dishwashers, glasswashers, countertop warewashers, door type dishwashers, low temp dishwashers, and high temp dishwashers designed with stainless steel construction, fast cycle times, low water consumption, and built-in booster heater options. Foodservice operators value Jet-Tech ware washers for practical engineering, service accessibility, and consistent sanitation performance in demanding commercial kitchen operations.\u003c\/p\u003e","products":[{"product_id":"jet-tech-f-14-multi-purpose-countertop-warewasher-high-temp-with-built-in-booster","title":"Jet-Tech F-14 Multi Purpose Countertop Warewasher, High Temp, with Built-in Booster","description":"\u003cp\u003eIdeally suited for smoothie and ice-cream shops, small spaces, counter-top bars, mobile carts, food courts, lounges, boats, caterers, dental offices, day-care operators, guest houses, room service, espresso bars, kiosks, laboratories and much more!!\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003e(1) open rack - 13.75\" x 13.75\" (350 mm. X 350 mm.)\u003c\/li\u003e\n  \u003cli\u003e(1) 4-place insert #30131 for blender containers\u003c\/li\u003e\n  \u003cli\u003e(1) 9-place insert #300132 for glassware\u003c\/li\u003e\n  \u003cli\u003e(1) 6-place insert #30037 for plates up to 10.5\" diameter\u003c\/li\u003e\n  \u003cli\u003e(1) 15-place insert #30035 for saucers and\/or small plates\u003c\/li\u003e\n  \u003cli\u003e(1) cutlery holder #30026\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003e16-place insert #30133 for glassware\u003c\/li\u003e\n  \u003cli\u003eDrain water tempering kit\u003c\/li\u003e\n  \u003cli\u003ePressure reducing valve (PRV)kit\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003e \u003c\/h4\u003e\n  \u003ch4\u003eHourly production\u003c\/h4\u003e\n  \u003cp\u003e20 racks of various items OR depending on rack insert used, the following quantities can be washed and rinsed:\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003e4-place insert for Blender Containers - 80 \/ hr.\u003c\/li\u003e\n  \u003cli\u003e9-place insert for Glassware - 180 \/ hr.\u003c\/li\u003e\n  \u003cli\u003e16-place insert for Glassware - 320 \/ hr.\u003c\/li\u003e\n  \u003cli\u003e6-place insert for Dishes - 120 \/ hr.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003e \u003c\/h4\u003e\n  \u003ch4\u003eConnecting your new F-14\u003c\/h4\u003e\n  \u003cp\u003eThis dishwasher must be installed on a level, rigid, nonflammable surface. Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting the leveling. Be sure to provide adequate space for water, drain and electrical connections. The rear panel must be removed for the hook ups and must be replaced after the connections are made.\u003c\/p\u003e\n  \u003ch4\u003eElectrical Supply\u003c\/h4\u003e\n  \u003cp\u003eA 115 Volt - 20 Amp circuit breaker is required for this washer. A power-cord with NEMA 5-20 plug is provided for your convenience.\u003c\/p\u003e\n  \u003ch4\u003eWater Supply\u003c\/h4\u003e\n  \u003cp\u003eA 3\/4\" NPT coupling is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds prescribed amount, you will get inconsistent washing temperature, premature failure and thus may void the warranty.\u003c\/p\u003e\n  \u003cp\u003eIncoming water temperature must be 140°F (60°C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. A flexible fill hose is provided to make installation, servicing and maintenance easier.\u003c\/p\u003e\n  \u003cp\u003eMake sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended.\u003c\/p\u003e\n  \u003ch4\u003eDrain Connection\u003c\/h4\u003e\n  \u003cp\u003eThis washer has a gravity type drain. Since this unit is a \u003cq\u003eCounter-Type\u003c\/q\u003e installation, the flexible drain hose provided should be connected to the drain outlet elbow at the rear of the unit behind the rear access panel; and extended through the side opening directly into a floor drain or sink (see Figure)\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e All panels must be replaced on the unit when the installation is completed.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e manually fill wash tank with water. The dishwasher will fill automatically when the power is turned ON.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917379215645,"sku":"F-14","price":3181.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23775_F-14-Multi-purpose-Countertop-Warewasher.jpg?v=1768235966"},{"product_id":"jet-tech-f-16dp-undercounter-dishwasher-high-temp-built-in-electric-booster-24-racks-per-hour","title":"Jet-Tech F-16DP 20 In. Undercounter High-Temp Cup and Glasswasher, Integrated Booster, 15.75\" x 15.75\" Rack, 0.5 HP","description":"\u003cp\u003eThe Jet-Tech F-16DP is an undercounter high-temperature cup and glasswasher built for bars, coffee shops, and any operation where clean glassware needs to come back fast without spots or residue. The machine runs a complete wash-and-rinse cycle in 145 seconds of washing plus 15 seconds of final rinse, turning around racks quickly enough to keep up with a busy service window. It accepts 15.75 by 15.75 inch racks with 10 inches of vertical door clearance, sized specifically for stemware, tumblers, coffee cups, and similar small wares. Standard equipment includes a 16-compartment angled glassware rack arranged in a 4 by 4 grid that holds glasses at an angle for better drainage, plus one open combination rack for cups, bowls, and assorted items. The integrated booster heater brings the final rinse to 185 to 194 degrees Fahrenheit for NSF-compliant high-temperature sanitizing without needing an external booster unit.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Stainless Steel Construction with Integrated Booster Heater\u003c\/h3\u003e\n \u003cp\u003eThe body, external housing, wash tank, and all chassis components are brushed 304 stainless steel (18\/10 grade), so every surface that contacts water, detergent, and rinse chemicals resists corrosion from day one. The integrated booster heater is also AISI 18\/10 stainless steel, bringing incoming hot water from your 140 degree supply line up to the 185 to 194 degree range required for NSF-certified high-temperature sanitizing. Because the booster is built into the machine, you do not need a separate external booster taking up space under the counter or on a nearby wall. Double-wall insulated panels on the top and sides keep operating noise down to 58 dBa, which is quiet enough to run during front-of-house service without disrupting conversation. The wash and rinse arms are upper and lower revolving assemblies constructed entirely of stainless steel, and they lift out without tools for cleaning at the end of each shift.\u003c\/p\u003e\u003ch3\u003eSlide-Out Control Panel with Digital Temperature Gauges\u003c\/h3\u003e\n \u003cp\u003eThe front control panel slides out from the machine on integrated rails, giving your service technician full access to internal wiring and components without pulling the unit out from under the counter. Individual digital gauges display both the wash tank temperature and the booster rinse temperature separately, so you can confirm at a glance that the machine is holding proper sanitizing temps before running the next rack. The wash pump is protected by a built-in filter, and a stainless steel shield covers the wash tank heating element to prevent utensils or debris from making direct contact with it. Automatic fill and water level regulation keeps the wash tank topped off to the correct level as water is consumed during each cycle, so you do not have to manually add water between racks. A safety micro-switch on the door interrupts the wash pump the moment the door is opened mid-cycle, preventing water from spraying out onto the operator or the floor.\u003c\/p\u003e\u003cp\u003eThe F-16DP measures 20.25 inches wide by 20.25 inches deep by 29.75 inches high, compact enough to fit under a standard bar counter. The 0.5 HP motor-pump with thermal overload protection draws 12.9 amps on 208-240\/60\/1 power, with a maximum power rating of 2600 watts. The 3.0 gallon wash tank uses a 2000 watt heating element, and the 0.79 gallon booster runs a 2400 watt element. Water consumption is 0.53 gallons per cycle and 15 gallons per hour maximum. Connect to a 1\/2 inch hot water supply at 140 degrees Fahrenheit with 30 psi recommended dynamic pressure. The water inlet is a 3\/4 inch male hose connector (hose included), and the drain is a 1 inch ID connection with a maximum height of 36 inches (hose included). Shipping weight is 116 lbs.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917381902621,"sku":"F-16DP","price":4331.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/39854_F-16DP-High-Temp-Undercounter-Dishwasher.jpg?v=1773857309"},{"product_id":"jet-tech-f-18dp-undercounter-dishwasher-high-temp-with-built-in-booster-24-racks-per-hour","title":"Jet-Tech F-18DP 24 In. Undercounter High-Temp Dishwasher, Integrated Booster, 19.75\" x 19.75\" Rack, 1.0 HP","description":"\u003cp\u003eThe Jet-Tech F-18DP is an undercounter high-temperature dishwasher sized for restaurants, cafeterias, and any kitchen that needs to wash full-size plates, bowls, and service ware without dedicating floor space to a door-type or conveyor machine. The 19.75 by 19.75 inch rack accepts dinner plates, salad plates, soup bowls, and sheet pan inserts with 12.5 inches of vertical door clearance. Each cycle runs 145 seconds of washing followed by a 15-second final rinse at 185 to 194 degrees Fahrenheit, meeting NSF high-temperature sanitizing requirements through the integrated booster heater rather than relying on chemical sanitizer or your building's hot water supply hitting the right temperature. Standard equipment includes one open combination rack and one peg dish rack, both sized at 19.75 by 19.75 inches. The deep drawn inner wash chamber provides a smooth, seamless interior that eliminates corners where food particles collect, making end-of-day cleanout faster and more thorough.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Stainless Steel Construction with Integrated Booster Heater\u003c\/h3\u003e\n \u003cp\u003eThe body, external housing, wash tank, and all chassis components are brushed 304 stainless steel (18\/10 grade), so every surface that contacts water, detergent, and rinse chemicals resists corrosion from day one. The integrated booster heater is also AISI 18\/10 stainless steel, bringing incoming hot water from your 140 degree supply line up to the 185 to 194 degree range required for NSF-certified high-temperature sanitizing. Because the booster is built into the machine, you do not need a separate external booster taking up space under the counter or on a nearby wall. Double-wall insulated panels on the top and sides keep operating noise down to 58 dBa, which is quiet enough to run during front-of-house service without disrupting conversation. The wash and rinse arms are upper and lower revolving assemblies constructed entirely of stainless steel, and they lift out without tools for cleaning at the end of each shift.\u003c\/p\u003e\u003ch3\u003eSlide-Out Control Panel with Digital Temperature Gauges\u003c\/h3\u003e\n \u003cp\u003eThe front control panel slides out from the machine on integrated rails, giving your service technician full access to internal wiring and components without pulling the unit out from under the counter. Individual digital gauges display both the wash tank temperature and the booster rinse temperature separately, so you can confirm at a glance that the machine is holding proper sanitizing temps before running the next rack. The wash pump is protected by a built-in filter, and a stainless steel shield covers the wash tank heating element to prevent utensils or debris from making direct contact with it. Automatic fill and water level regulation keeps the wash tank topped off to the correct level as water is consumed during each cycle, so you do not have to manually add water between racks. A safety micro-switch on the door interrupts the wash pump the moment the door is opened mid-cycle, preventing water from spraying out onto the operator or the floor.\u003c\/p\u003e\u003cp\u003eThe F-18DP measures 23.75 inches wide by 23.75 inches deep by 33.5 inches high. The 1.0 HP motor-pump with thermal overload protection draws 23.5 amps on 208-240\/60\/1 power, with a maximum power rating of 4850 watts. The 6.34 gallon wash tank uses a 2800 watt heating element, and the 1.85 gallon booster runs a 4000 watt element. Water consumption is 0.74 gallons per cycle and 24.1 gallons per hour maximum. Connect to a 1\/2 inch hot water supply at 140 degrees Fahrenheit with 30 psi recommended dynamic pressure (a pressure reducing valve may be required). The water inlet is a 3\/4 inch male hose connector (hose included), and the drain is a 1 inch ID connection with a maximum height of 36 inches (hose included). Shipping weight is 165 lbs.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917383213341,"sku":"F-18DP","price":5662.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/39856_F-18DP-High-Temp-Undercounter-Dishwasher.jpg?v=1773857333"},{"product_id":"jet-tech-x-33-undercounter-dishwasher-low-temp-37-racks-per-hour","title":"Jet-Tech X-33 Undercounter Dishwasher, Low Temp, 37 Racks Per Hour","description":"\u003cp\u003eCleans your dishes and glassware. This model is excellent for small restaurants, fast food operations, institutions, nursing homes, etc.\u003c\/p\u003e\n  \u003cp\u003eIncluded with the X-33 dishwasher:\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003e(1) 20 x 20 open rack\u003c\/li\u003e\n  \u003cli\u003e(1) 20 x 20 peg rack for dishes\u003c\/li\u003e\n  \u003cli\u003e(1) fill hose\u003c\/li\u003e\n  \u003cli\u003e(1) drain hose\u003c\/li\u003e\n  \u003cli\u003e(4) adjusting feet\u003c\/li\u003e\n  \u003cli\u003e(1) operator manual\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003ePressure reducing valve (PRV) kit\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003eInstallation\u003c\/h4\u003e\n  \u003cp\u003eThis dishwasher must be installed on a level, rigid, nonflammable surface (i.e.:ceramic tiles, concrete, sheet metal, etc). Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting them. Be sure to provide adequate space for water, drain and electrical connections.\u003c\/p\u003e\n  \u003ch4\u003eElectrical\u003c\/h4\u003e\n  \u003cp\u003eThe dishwasher must be connected with 120 volts 60Hz line. The cord and plug on this unit must not be modified or tempered. Unit must be well grounded. Breaker rating should be 15 amps.\u003c\/p\u003e\n  \u003ch4\u003ePlumbing\u003c\/h4\u003e\n  \u003cp\u003e\u003cstrong\u003eWater Inlet:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eA 3\/4\"\" NPT coupling is required with a maximum of 30 p.s.i. dynamic pressure, and a minimum of 20 p.s.i. . A water pressure regulator is required. The water pressure should be 25 p.s.i. . Incoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended. Flexible hoses must be used to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. Water with a mineral content of 6 grains or higher must have an on-line water filtering system or another type of water softening system.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDrain:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eThe X-33 will pump the drain water manually or automatically. A 1\"\"\"\" ID flexible drain hose (included) is recommended to facilitate maintenance and servicing of the machine. It is important not to reduce the size of this hose. Secure the drain hose well as the drain water pressure is approximately 10 p.s.i..\u003c\/p\u003e\n  \u003ch4\u003eChemical hook-up\u003c\/h4\u003e\n  \u003cp\u003eThis unit is equipped with three (3) chemical pumps; located behind the bottom panel (below the door). Each will inject a different chemical product at a specific time during the wash and rinse cycle. The chemical pumps have sufficient length of tubing hose which can be inserted into gallon size containers, near the dishwasher. The lines can be passed through the center of the dishwasher out either side. The chemical pumps have colored tubing for ease of identification. The colors are as follow: Red for Detergent Clear for Sanitizer Blue for Rinse-additive To prime the pumps; push the toggle switch above each pump until the products have reached the sump.\u003c\/p\u003e\n  \u003cp\u003eSuggested chemical use and quantities.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDetergent: \u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eExtra heavy-duty non-foaming commercial liquid dish detergent required. Adjust to .30% concentration.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eSanitizer: \u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eLiquid chlorine bleach (sodium hypochlorite - 5.25% solution) adjusted to 50 PPM.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eRinse-Aid:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eLow foam rinse-aid, surfactant isopropanol, adjusted for proper sheeting.\u003c\/p\u003e\n  \u003cp\u003eSee local health code for appropriate quantities and usage. Contact your chemical representatives for calibration and supply.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e Whenever manipulating chemicals, use appropriate protection (eyes and hands) as these chemicals are corrosive.\u003c\/p\u003e\n  \u003ch4\u003e \u003c\/h4\u003e\n  \u003ch4\u003eOperation\u003c\/h4\u003e\n  \u003cp\u003e\u003cstrong\u003eFill the dishwasher:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003col\u003e\n  \u003cli\u003eTo begin, you need to turn the black swivel switch clockwise a quarter turn to the ON position.\u003c\/li\u003e\n  \u003cli\u003eFill the wash tank with water by pressing the \u003cstrong\u003eround black fill button\u003c\/strong\u003e (on the left side). Open the door to monitor the water level, push and hold the \u003cstrong\u003eblack fill button\u003c\/strong\u003e until the water has reached an inch above the bottom. This needs to be done only if the wash tank is empty. The dishwasher will refill itself automatically at every cycle.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003e\u003cstrong\u003eBegin Loading:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003col\u003e\n  \u003cli\u003eLoad a rack of cups and glasses and slide into the dishwasher. Close the door.\u003c\/li\u003e\n  \u003cli\u003ePress the cycle button (black round button on the right) to start the wash cycle.\u003c\/li\u003e\n  \u003cli\u003eThe wash and rinse cycle takes 90 seconds. The dishwasher will automatically pump in the proper amount of detergent, rinse-aid and sanitizer.\u003c\/li\u003e\n  \u003cli\u003eOnce the cycle is done, the indicator light will switch Off.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003e\u003cstrong\u003eDrain the unit:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eAt the end of the day, or if the water needs to be emptied, you can drain the dishwasher by pressing and holding the white button. You need to hold for several seconds (about 30 seconds).\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003col\u003e\n  \u003cli\u003eDo not run the dishwasher without any water.\u003c\/li\u003e\n  \u003cli\u003eMake sure the power switch is turned off at night.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003ch4\u003e \u003c\/h4\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917384392989,"sku":"X-33","price":5843.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23790_X-33-Low-Temp-undercounter-dishwasher.jpg?v=1768236021"},{"product_id":"jet-tech-727e-glasswasher-high-temp-built-in-electric-booster-heater-30-racks-per-hour","title":"Jet-Tech 727E Glasswasher, High-Temp, Built-in Electric Booster Heater, 30 Racks Per Hour","description":"\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003eOne 16-compartment (4x4) angled section glassware rack \u003c\/li\u003e\n  \u003cli\u003eOne open combination rack for cups, bowls and assorted wares\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003ePressure reducing valve (PRV)\u003c\/li\u003e\n  \u003cli\u003eDrain water tempering kit\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003eConnecting the 727\u003c\/h4\u003e\n  \u003cp\u003e\u003cstrong\u003eWater Supply:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eA 3\/4\" NPT fitting is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water flow pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds the prescribed amount, you will get inconsistent washing temperature, premature failure and thus may void the warranty.\u003c\/p\u003e\n  \u003cp\u003eIncoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. A flexible drain hose is provided to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDrain:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eThis dishwasher is equipped with an automatic drain pump that will pump the drain water to a maximum height of 36\" (0.9 meter). A 1\" ID flexible drain hose is supplied to facilitate maintenance and servicing of the machine. It is important not to reduce the size of this hose. A 1\" check-valve* may be required. Drain pump equipped machines have a white button on the control panel beside the green power button.\u003c\/p\u003e\n  \u003ch4\u003eElectrical\u003c\/h4\u003e\n  \u003cp\u003eA 208-240 volt, 60 Hz, Single Phase circuit is required for this unit. Check the rating plate on the front of the machine for the amp draw. In spite of the fact that the rating plate shows 208 volts, the unit is designed function properly on 208 volts to 240 volts.\u003c\/p\u003e\n  \u003cp\u003eThe top \u0026amp; back panels must be removed for the electrical hook -up. The top panel is secured by two Phillips head screws. Once the screws are removed, the panel should be slid to the back and lifted. The back panel is also held by two screws. Remove them, pull the bottom away from the machine and lift the panel.\u003c\/p\u003e\n  \u003cp\u003eThe terminal block is located inside the back cover. Pass the cable through the cable strain relief and connect the wires to the terminals L1 (brown wire), L2 (blue wire) \u0026amp; Ground (yellow \u0026amp; green wire). Replace the top \u0026amp; back L1 Water panels being careful not to pinch or kink any wires or hoses. There should be sufficient cable length to G Allow the machine to be pulled out for service.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eIMPORTANT NOTE\u003c\/strong\u003e Reasonable access to and around the machine for service must be provided. Disconnecting of hard plumbing or removal of counter tops or cabinets, etc., for servicing is not covered by warranty.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e fill dishwasher manually with water. The dishwasher will fill automatically when the power is turned on.\u003c\/p\u003e\n  \u003cp\u003eAll panels must be replaced on the unit when the installation\u003c\/p\u003e\n  \u003ch4\u003eChemical Pumps\u003c\/h4\u003e\n  \u003cp\u003eThe model 727E is supplied with factory installed liquid detergent and rinse additive pumps to automatically dispense during each wash \u0026amp; rinse cycle. Before accessing the bottom section of the dishwasher, make sure that the power is turned off at the source (breaker panel).\u003c\/p\u003e\n  \u003cp\u003eThe bottom panel can only be removed with a flat tool like a screwdriver\u003c\/p\u003e\n  \u003cp\u003eInsert the screw-driver in the gap between the front panel and the side panel. Pry open towards you. Do this on both sides\u003c\/p\u003e\n  \u003cp\u003eThe red \u0026amp; blue hoses connected to the pumps must be routed out of the bottom of the dishwasher. The red tube is for detergent and the blue tube is for rinse additive. The containers can be either to the right or left of the dishwasher. Perforating the stainless panel is not recommended. The two chemical pumps are factory adjusted to accommodate most installations.\u003c\/p\u003e\n  \u003cp\u003eThere is a mark on the pump indicating this setting. It is recommended that only qualified personnel alter these settings.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eUNDER NO CIRCUMSTANCES\u003c\/strong\u003e should the detergent pump be turned off\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917385408797,"sku":"727-E","price":4260.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23795_727E-High-Temp-Glasswasher-Elec-Series_1ba57330-bd77-44e7-b0c4-a0bdbe4e8f27.jpg?v=1768236047"},{"product_id":"jet-tech-737-e-undercounter-deluxe-dishwasher-high-temp-30-racks-per-hour","title":"Jet-Tech 737-E 24 In. Undercounter High-Temp Deluxe Dishwasher, Electronic Series, Integrated Booster, 19.75\" x 19.75\" Rack, 1.0 HP","description":"\u003cp\u003eThe Jet-Tech 737-E is an undercounter high-temperature deluxe dishwasher from the Electronic Series, built for restaurants, bars, and kitchens that need professional-grade warewashing in a compact footprint. The 19.75 by 19.75 inch rack accepts full-size dinner plates, bowls, and service ware with 13.5 inches of vertical door clearance. Three programmable wash cycles at 2, 3, or 4 minutes give you flexibility to match cycle time to soil level, producing 30, 20, or 15 racks per hour respectively (up to 540 dishes per hour on the shortest cycle). The one-piece stamped wash tank with coved corners provides a seamless interior that is faster to clean and more sanitary than welded alternatives, and the reinforced door hinge system handles the repeated open-close cycles of a busy shift without loosening over time. Standard insulated top and side panels keep noise down to 58 dBa, quiet enough to run during front-of-house service. The unit can be installed as built-in or free-standing.\u003c\/p\u003e\u003ch3\u003eCoved-Corner One-Piece Stamped Wash Tank in Heavy-Duty Stainless Steel\u003c\/h3\u003e\n \u003cp\u003eThe body, external housing, wash tank, and all chassis components are brushed 304 stainless steel. The inner washing chamber features coved corners and a one-piece stamped wash tank that eliminates the seams and joints where food particles, grease, and bacteria typically collect in conventional welded tanks. That recessed, seamless design makes the wash chamber faster to clean at the end of the shift and provides the most sanitary environment possible for your ware. The wash pump is protected by double scrap filters that catch food debris before it reaches the impeller, and these filters lift out for quick cleaning. Upper and lower wash and rinse jets sit on revolving arms constructed entirely of stainless steel, delivering thorough spray coverage across the full rack, and the arms remove without tools when you need to clean the spray nozzles.\u003c\/p\u003e\u003ch3\u003eIntegrated Booster Heater with Front-Mounted Electronic Controls\u003c\/h3\u003e\n \u003cp\u003eThe integrated AISI 18\/10 stainless steel booster heater brings the final rinse up to sanitizing temperature without relying on an external booster unit or your building's hot water system hitting the right temperature on its own. Independently operated heating elements alternate between the booster and wash tank, which reduces peak electrical draw at any given moment and lowers energy costs over a full shift. The front-mounted electronic control panel gives you digital temperature displays for both wash and rinse temperatures at a glance, and the slide-out panel design provides your service technician easy access to internal components without pulling the unit out from under the counter or away from the wall. A safety micro-switch on the door interrupts the wash motor-pump the moment the door is opened, and automatic fill and water level regulation keeps the tank at the correct operating level between racks.\u003c\/p\u003e\u003cp\u003eThe 737-E measures 23.75 inches wide by 23.5 inches deep by 33.5 inches high. The 1.0 HP wash pump draws 22.12 amps on 208V\/60Hz power with a maximum power rating of 4.6 KW. The 3.43 gallon wash tank uses a 2.8 KW heating element, and the 1.85 gallon booster runs a 4.0 KW element. The integrated booster brings the final rinse to 185 to 194 degrees Fahrenheit for high-temperature sanitizing. Connect to a minimum 122 degree Fahrenheit incoming water supply at 30 psi (2 bar). Water consumption is 0.74 gallons per cycle at 30 psi. Machine weight is 165 lbs and shipping weight is 212 lbs.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917386359069,"sku":"737-E","price":7158.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/39858_737E-High-Temp-Deluxe-Dishwasher-Electronic-Series.jpg?v=1773857354"},{"product_id":"jet-tech-747hh-deluxe-door-type-warewasher-high-temp-with-booster-40-racks-per-hour","title":"Jet-Tech 747HH Deluxe Door Type Warewasher, High-temp, with Booster, 40 Racks Per Hour","description":"\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003eOne 20\"x 20\" stainless steel 10-place sheet pan rack and\u003c\/li\u003e\n  \u003cli\u003eOne 20\" x 20\" peg rack for dishes\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n  \u003cli\u003ePressure reducing valve (PRV) kit\u003c\/li\u003e\n  \u003cli\u003eSplash shield for corner\u003c\/li\u003e\n  \u003cli\u003eSheet pan racks\u003c\/li\u003e\n  \u003cli\u003eDrain water tempering kit\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003eConnecting the 747\u003c\/h4\u003e\n  \u003cp\u003eThis dishwasher must be installed on a level, rigid, nonflammable surface. Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting the leveling. Be sure to provide adequate space for water, drain and electrical connections.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWater Supply:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eA 3\/4\" NPT fitting is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water flow pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds the prescribed amount, you will get inconsistent washing temperature, premature parts failure and thus may void the warranty. Incoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. This type hose is standard for most warewashing machines. Fittings should be available from your local hardware or plumbing supply house. Flexible hoses must be used to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDrain:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eThis dishwasher has a gravity drain. Maximum height of the drain should not exceed 20\" (50cm). A 1.5\" ID flexible drain hose is recommended to facilitate maintenance and servicing of the machine.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eA 208-240 volt, 60 Hz, Single Phase or Three Phase circuit is required for this unit. Check the rating plate on the machine for amp draw. Pump rotation must be verified on 3 phase units at time of install. In spite of the fact that the rating plate shows 208 volts, the unit is designed function properly from 208 volts to 240 volts. The bottom cover (under the controls) is snapped in to position and should be removed. The terminal block is located in the base of the unit, on the left side. Pass the cable through the cable strain relief at the back and connect the wires to the terminals L1 (brown wire), L2 (blue wire), L3 (black wire) \u0026amp; Ground (yellow \u0026amp; green wire). There should be sufficient cable length to permit the machine to be pulled out for service.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e manually fill wash tank with water. The dishwasher will fill automatically when the power is turned ON.\u003c\/p\u003e\n  \u003ch4\u003eImportant Note\u003c\/h4\u003e\n  \u003cp\u003eReasonable access to and around the machine for service must be provided. Disconnecting of hard plumbing or removal of counter tops or cabinets, etc., for servicing is not covered by warranty. Verify rotation of the pumps for three phase unit.\u003c\/p\u003e\n  \u003cp\u003eAll panels must be replaced on the unit when the installation is completed.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917387374877,"sku":"747HH","price":14663.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23805_747HH-High-temp-deluxe-Door-Type-warewasher-1_2d862fff-f85d-4df8-abdb-9e0884c4b57e.jpg?v=1768236080"},{"product_id":"jet-tech-757e-door-type-dishwasher-high-temp-built-in-booster-60-racks-per-hour","title":"Jet-Tech 757-E 26 In. Door-Type High-Temp Dishwasher, Electronic Series, Heat Recovery, OneGO Controls, 60 Racks\/Hr","description":"\u003cp\u003eThe Jet-Tech 757-E is a door-type high-temperature dishwasher from the Electronic Series, designed for high-volume restaurants and institutional kitchens that process large quantities of ware throughout the day. A built-in heat recovery module captures thermal energy from each wash cycle and uses it to preheat incoming fresh water, so the booster has less work to do reaching sanitizing temperature and the unit accepts incoming water as low as 77 degrees Fahrenheit. The ThermoStop system guarantees the final rinse hits 180 degrees Fahrenheit every cycle for NSF high-temperature sanitizing, and a dedicated final rinse pressure pump (0.20 HP) delivers constant, powerful water pressure for thorough rinsing regardless of your building's water pressure fluctuations. The OneGO electronic control system with LED interface gives you four programmable wash cycles at 1, 2, 3, or 4 minutes through soft-touch buttons, producing up to 60 racks per hour on the shortest cycle. SmartSelf diagnostics provide advanced service information at your fingertips, and the EasyGO soft-start washing system ramps up gradually to protect delicate glassware and china from chippage. The 18.75-inch door clearance with ergonomic handle accepts tall stock pots, mixing bowls, and sheet pans. The unique stainless steel rack support glide system lets you switch between in-line and corner configurations without tools. Standard equipment includes one open combination rack, one peg dish rack, and fill and drain hoses.\u003c\/p\u003e\u003ch3\u003eCoved-Corner One-Piece Stamped Wash Tank in Heavy-Duty Stainless Steel\u003c\/h3\u003e\n \u003cp\u003eThe body, external housing, wash tank, and all chassis components are brushed 304 stainless steel. The inner washing chamber features coved corners and a one-piece stamped wash tank that eliminates the seams and joints where food particles, grease, and bacteria typically collect in conventional welded tanks. That recessed, seamless design makes the wash chamber faster to clean at the end of the shift and provides the most sanitary environment possible for your ware. The wash pump is protected by double scrap filters that catch food debris before it reaches the impeller, and these filters lift out for quick cleaning. Upper and lower wash and rinse jets sit on revolving arms constructed entirely of stainless steel, delivering thorough spray coverage across the full rack, and the arms remove without tools when you need to clean the spray nozzles.\u003c\/p\u003e\u003ch3\u003eIntegrated Booster Heater with Front-Mounted Electronic Controls\u003c\/h3\u003e\n \u003cp\u003eThe integrated AISI 18\/10 stainless steel booster heater brings the final rinse up to sanitizing temperature without relying on an external booster unit or your building's hot water system hitting the right temperature on its own. Independently operated heating elements alternate between the booster and wash tank, which reduces peak electrical draw at any given moment and lowers energy costs over a full shift. The front-mounted electronic control panel gives you digital temperature displays for both wash and rinse temperatures at a glance, and the slide-out panel design provides your service technician easy access to internal components without pulling the unit out from under the counter or away from the wall. A safety micro-switch on the door interrupts the wash motor-pump the moment the door is opened, and automatic fill and water level regulation keeps the tank at the correct operating level between racks.\u003c\/p\u003e\u003cp\u003eThe 757-E measures 25.5 inches wide by 32.5 inches deep by 61.5 inches high. The 1.75 HP wash pump operates on 208-240V\/60Hz through a single-point electrical connection, available in either single phase (50.5 amps) or three phase (29 amps) at 10.5 KW maximum power. The 5.25 gallon wash tank uses a 4.0 KW heating element, and the 2.62 gallon booster runs a 9.0 KW element. The wash temperature reaches 158 degrees Fahrenheit minimum, controlled electronically. Incoming water pressure should be between 21 and 30 psi. Water consumption is 0.74 gallons per cycle at 30 psi. The automatic start cycle begins washing the moment the hood closes. Adjustable bullet-style feet handle uneven floors. Machine weight is 330 lbs and shipping weight is 370 lbs.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917387931933,"sku":"757-E","price":11521.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/39860_757E-High-Temp-Door-Type-Dishwasher-Electronic-Series.jpg?v=1773857371"},{"product_id":"jet-tech-757-ev-high-temp-door-type-smart-dishwasher-60-racks-per-hour","title":"Jet-Tech 757-EV 29 In. Ventless Door-Type High-Temp Dishwasher, Heat Recovery, OneGO Electronic Controls, 60 Racks\/Hr","description":"\u003cp\u003eThe Jet-Tech 757-EV is a ventless door-type high-temperature dishwasher with a built-in heat recovery module that eliminates the need for an external exhaust hood or ventilation system. When you open the door after a cycle, there is no burst of steam into the kitchen because the recovery module captures the steam and vapor from the wash chamber and uses that heat to preheat incoming fresh water. That preheating means the booster has less work to do reaching sanitizing temperature, which saves energy and speeds up recovery time between racks. Incoming water only needs to be 77 degrees Fahrenheit (compared to 122 degrees or higher for conventional machines), because the heat recovery system handles the rest. The ThermoStop system guarantees the final rinse reaches 180 degrees Fahrenheit every cycle for NSF high-temperature sanitizing. The OneGO electronic control system with LED interface gives you four programmable wash cycles at 1, 2, 3, or 4 minutes through soft-touch buttons, and the SmartSelf diagnostics put service information at your fingertips if something needs attention. The EasyGO soft-start washing system ramps up gradually to protect delicate glassware and china from chippage and breakage. At 60 racks per hour, the 757-EV handles high-volume operations while the stainless steel revolving wash and rinse arms deliver thorough coverage across the full 19.75 by 19.75 inch rack. The inner washing chamber features coved corners and a one-piece stamped wash tank for the most sanitary environment possible, and the unique stainless steel rack support glide system lets you switch between in-line and corner configurations without tools. Standard equipment includes one open combination rack, one peg dish rack, and fill and drain hoses.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Stainless Steel Construction with Integrated Booster Heater\u003c\/h3\u003e\n \u003cp\u003eThe body, external housing, wash tank, and all chassis components are brushed 304 stainless steel. The integrated booster heater is AISI 18\/10 stainless steel, heating incoming water to the sanitizing range required for high-temperature warewashing without needing a separate external booster unit. Independently operated heating elements alternate between the booster and wash tank, which reduces the peak electrical draw at any given moment and cuts energy costs over a full shift. Automatic fill and water level regulation keeps the wash tank topped off to the correct operating level as water is consumed during each cycle, so you do not need to manually monitor or add water between racks. A safety micro-switch on the door interrupts the wash motor-pumps the moment the door is opened, preventing water from spraying onto the operator or the floor.\u003c\/p\u003e\u003ch3\u003eFront-Mounted Control Panel with Digital Temperature Displays\u003c\/h3\u003e\n \u003cp\u003eThe front-mounted control panel puts temperature readouts and cycle controls where you can see them without bending down or reaching behind the machine. Digital temperature displays show both wash and rinse temperatures independently, so you can verify at a glance that the unit is holding proper sanitizing temps before loading the next rack. Automatic peristaltic pumps dispense liquid detergent and rinse additive at the correct concentration during each cycle, eliminating the guesswork of manual chemical dosing. The wash pumps are protected by built-in scrap filters that catch food debris before it reaches the pump impeller, and these filters lift out for quick cleaning at the end of each shift.\u003c\/p\u003e\u003cp\u003eThe 757-EV measures 29.3 inches wide by 31.5 inches deep by 89.4 inches high. It accepts 208-240V\/60Hz power through a single-point electrical connection, available in either single phase (48.0 amps) or three phase (28.5 amps). The 4.0 KW tank heating element and 9.0 KW booster heating element produce a total maximum power rating of 10.0 KW. The 5.25 gallon wash tank and 2.62 gallon booster are paired with a 1 HP wash pump. Water consumption is 0.74 gallons per cycle at 30 psi, and incoming water pressure should be between 21 and 36 psi. The door provides 18.75 inches of vertical clearance with an ergonomic handle, and an automatic start cycle begins washing the moment the hood closes. Adjustable bullet-style feet handle uneven floors. Machine weight is 330 lbs and shipping weight is 370 lbs.\u003c\/p\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917388456221,"sku":"757-EV","price":19348.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/39862_757E-High-Temp-Door-Type-Dishwasher-Electronic-Series-1.jpg?v=1773857380"},{"product_id":"jet-tech-ev18-high-temp-undercounter-dishwasher-60-racks-per-hour","title":"Jet-Tech EV18 High-Temp Undercounter Dishwasher, 60 Racks Per Hour","description":"\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eOne open combination rack\u003c\/li\u003e\n \u003cli\u003eOne peg dish rack 19.75\" x 19.75\" (500 mm x 500 mm)\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\u003cstrong\u003eOptional accessories:\u003c\/strong\u003e\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003ePressure reducing valve (PRV) kit\u003c\/li\u003e\n \u003cli\u003eStainless steel stand (12\" high) \u003c\/li\u003e\n \u003cli\u003eDrain water tempering kit\u003c\/li\u003e\n \u003c\/ul\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917389504797,"sku":"EV18","price":3496.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23814_ev-18-dishwasher-mvp-group-jet-tech-1-1000x800.jpg?v=1768236115"},{"product_id":"jet-tech-ev22-high-temp-door-type-dishwasher-60-racks-per-hour","title":"Jet-Tech EV22 High-Temp Door Type Dishwasher, 60 Racks Per Hour","description":"\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eOne open combination rack\u003c\/li\u003e\n \u003cli\u003eOne peg dish rack 19.75\" x 19.75\" (500 mm x 500 mm)\u003c\/li\u003e\n \u003c\/ul\u003e","brand":"Jet-Tech","offers":[{"title":"Default Title","offer_id":49917389996317,"sku":"EV22","price":6559.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/23821_ev-22-dishwasher-mv-group-jet-tech-1-1000x800.jpg?v=1768236127"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/collections\/Jet-Tech.png?v=1779003049","url":"https:\/\/thechefstore.com\/collections\/jet-tech.oembed","provider":"TheChefStore.Com","version":"1.0","type":"link"}