{"title":"Commercial Shrink Wrap Machines","description":"","products":[{"product_id":"sealer-sales-ss-1519lm-economy-semi-automatic-l-bar-sealer-15-x-19-seal-area-magnet-hold-down-micro-knife-seal-8-to-10-ppm","title":"Sealer Sales SS-1519LM Economy Semi-Automatic L-Bar Sealer, 15\" x 19\" Seal Area, Magnet Hold Down, Micro Knife Seal, 8 to 10 PPM","description":"\u003cp\u003eThe Sealer Sales SS-1519LM is a semi-automatic L-Bar sealer with a 15\" x 19\" seal area, configured with magnet hold-down for hands-free product loading. It runs 8 to 10 packages per minute and fits the bench footprint of retail back rooms, small fulfillment workstations, and shrink-wrap operations that pack from hand rather than off a continuous discharge conveyor. The SS series has been in production since 1993.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals the film with a thin heated band that lasts thousands of cycles before service. No seal wires to replace, no consumable heating element changeovers.\u003c\/p\u003e\u003ch3\u003eMagnet Hold-Down for Operator Hands-Free Loading\u003c\/h3\u003e\u003cp\u003eDual magnets hold the upper seal frame in the up position so the operator can position the product and the film without holding the frame open. The magnets release on cycle start. This is what the \"M\" in \"LM\" refers to.\u003c\/p\u003e\u003ch3\u003eStainless Steel Film Clamps and Compensator Seal\u003c\/h3\u003e\u003cp\u003eStainless steel film clamps and the compensator seal keep film tension consistent across the seal cycle without rusting in food, retail, or industrial pack-out environments.\u003c\/p\u003e\u003ch3\u003ePin Wheel Hole Punch and Adjustable Loading Tray\u003c\/h3\u003e\u003cp\u003eThe pin wheel hole punch perforates the bag at the seal so the shrink tunnel can vent trapped air during the heat cycle. The loading tray adjusts to product height so packages slide cleanly into the seal envelope.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF\u003c\/h3\u003e\u003cp\u003eThe SS-1519LM is rated for POF shrink film. PVC is not recommended; PVC byproducts can corrode the seal wire over time and the film does not shrink consistently with this seal head profile.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502628765981,"sku":"SS-1519LM","price":3630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58207_SS-1519LM-img1.jpg?v=1780308279"},{"product_id":"sealer-sales-ss-1622mk-standard-series-semi-automatic-l-bar-sealer-16-x-22-seal-area-micro-knife-seal-motorized-discharge-conveyor-10-to-15-ppm","title":"Sealer Sales SS-1622MK Standard Series Semi-Automatic L-Bar Sealer, 16\" x 22\" Seal Area, Micro Knife Seal, Motorized Discharge Conveyor, 10 to 15 PPM","description":"\u003cp\u003eThe Sealer Sales SS-1622MK is a Standard Series semi-automatic L-Bar sealer rated for heavy-duty production, designed to run two shifts per day. It pairs the Micro Knife seal head with a motorized discharge conveyor, dual magnet hold-down, stainless steel film clamps, and a heavy-duty cast aluminum seal head. The 16\" x 22\" seal envelope handles products up to 20\" film width. Throughput is 10 to 15 packages per minute under typical operator pacing.\u003c\/p\u003e\u003ch3\u003eProduction-Rated Construction\u003c\/h3\u003e\u003cp\u003eHeavy-duty frame, cast aluminum seal head, and seal head return cylinder are sized for continuous two-shift operation. The SS Standard Series has been in production since 1993 with thousands of units in the field.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals the film with a thin heated band that lasts thousands of cycles before service. Cast aluminum seal head provides rigidity through long production runs.\u003c\/p\u003e\u003ch3\u003eMotorized Discharge Conveyor\u003c\/h3\u003e\u003cp\u003eAn integrated motorized discharge conveyor with timer carries sealed packages away from the seal envelope automatically so the operator can load the next package without manual offload. Transition rollers ease the handoff from seal area to conveyor.\u003c\/p\u003e\u003ch3\u003eMagnet Hold-Down and Film Roll Brake\u003c\/h3\u003e\u003cp\u003eDual magnet hold-down lets the operator load product without holding the upper seal frame. The film roll brake prevents over-winding so film tension stays consistent through long production runs.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF\u003c\/h3\u003e\u003cp\u003ePOF shrink film is the recommended material. PVC is not recommended; PVC byproducts can corrode the seal wire over time and the film does not shrink consistently with this seal head profile.\u003c\/p\u003e\u003ch3\u003ePairs with a Separate Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe seal head discharges into a downstream shrink tunnel for a complete L-Bar plus shrink-wrap line.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502631977245,"sku":"SS-1622MK","price":5995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58209_SS-1622MK-img1.jpg?v=1780308288"},{"product_id":"sealer-sales-ss-2028mk-standard-series-semi-automatic-l-bar-sealer-20-x-28-seal-area-micro-knife-seal-motorized-discharge-conveyor-10-to-15-ppm","title":"Sealer Sales SS-2028MK Standard Series Semi-Automatic L-Bar Sealer, 20\" x 28\" Seal Area, Micro Knife Seal, Motorized Discharge Conveyor, 10 to 15 PPM","description":"\u003cp\u003eThe Sealer Sales SS-2028MK is a Standard Series semi-automatic L-Bar sealer rated for heavy-duty production, designed to run two shifts per day. It pairs the Micro Knife seal head with a motorized discharge conveyor, dual magnet hold-down, stainless steel film clamps, and a heavy-duty cast aluminum seal head. The 20\" x 28\" seal envelope handles products up to 25\" film width. Throughput is 10 to 15 packages per minute under typical operator pacing.\u003c\/p\u003e\u003ch3\u003eProduction-Rated Construction\u003c\/h3\u003e\u003cp\u003eHeavy-duty frame, cast aluminum seal head, and seal head return cylinder are sized for continuous two-shift operation. The SS Standard Series has been in production since 1993 with thousands of units in the field.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals the film with a thin heated band that lasts thousands of cycles before service. Cast aluminum seal head provides rigidity through long production runs.\u003c\/p\u003e\u003ch3\u003eMotorized Discharge Conveyor\u003c\/h3\u003e\u003cp\u003eAn integrated motorized discharge conveyor with timer carries sealed packages away from the seal envelope automatically so the operator can load the next package without manual offload. Transition rollers ease the handoff from seal area to conveyor.\u003c\/p\u003e\u003ch3\u003eMagnet Hold-Down and Film Roll Brake\u003c\/h3\u003e\u003cp\u003eDual magnet hold-down lets the operator load product without holding the upper seal frame. The film roll brake prevents over-winding so film tension stays consistent through long production runs.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF\u003c\/h3\u003e\u003cp\u003ePOF shrink film is the recommended material. PVC is not recommended; PVC byproducts can corrode the seal wire over time and the film does not shrink consistently with this seal head profile.\u003c\/p\u003e\u003ch3\u003ePairs with a Separate Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe seal head discharges into a downstream shrink tunnel for a complete L-Bar plus shrink-wrap line.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502632010013,"sku":"SS-2028MK","price":7947.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58213_SS-2028MK-img1.jpg?v=1780308298"},{"product_id":"sealer-sales-ss-1519ecm-220v-economy-l-bar-sealer-with-20l-x-16w-x-6h-shrink-tunnel-15-x-19-seal-area-220v","title":"Sealer Sales SS-1519ECM-220V Economy L-Bar Sealer with 20\"L x 16\"W x 6\"H Shrink Tunnel, 15\" x 19\" Seal Area, 220V","description":"\u003cp\u003eThe Sealer Sales SS-1519ECM-220V is a combined L-Bar sealer and shrink tunnel sized for low to medium production at 8 to 10 packages per minute. The L-Bar uses Micro Knife seal technology so the seal head holds up for years of cycles without seal wire replacement. The attached 20\"L x 16\"W x 6\"H shrink tunnel uses a live roller rod conveyor with a fully re-circulating air chamber, AC variable speed drive (0 to 60 feet per minute), digital temperature control, and automatic cool-down + shut-off.\u003c\/p\u003e\u003ch3\u003eMagnet Hold Only Configuration\u003c\/h3\u003e\u003cp\u003eThis is the ECM variant: magnet hold-down releases the seal bars automatically after each seal completes, but there is no motorized discharge conveyor between the L-Bar and the shrink tunnel. The operator manually transfers each sealed package into the tunnel.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals POF shrink film without the seal wire replacement cycle older L-Bar sealers require. Cast aluminum seal head, heavy-duty frame.\u003c\/p\u003e\u003ch3\u003e6\" Tunnel Opening\u003c\/h3\u003e\u003cp\u003eThe shrink tunnel opening is 20\"L x 16\"W x 6\"H. Live roller rod conveyor moves packages through the chamber while the re-circulating hot air shrinks the film. AC variable speed drive lets the operator set the dwell time for the film gauge and package profile being run.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eSet the chamber temperature once for the film gauge, the controller holds it through the run, and when the operator powers off, the cool-down cycle runs automatically before shut-off to protect the heating elements and conveyor.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF, 60 to 80 Gauge\u003c\/h3\u003e\u003cp\u003eThe combo unit is rated for POF (polyolefin) shrink film at 60 to 80 gauge thickness. PVC is not recommended; PVC byproducts can corrode the seal wire over time and may not shrink consistently in this tunnel profile.\u003c\/p\u003e\u003ch3\u003e220V Configuration\u003c\/h3\u003e\u003cp\u003eThis SKU is the 220V configuration. The 220V option delivers a more efficient shrink tunnel and is the recommended choice for production environments.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502636564765,"sku":"SS-1519ECM-220V","price":6429.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58217_SS-1519ECM-220V-img1.jpg?v=1780308315"},{"product_id":"sealer-sales-ss-1519ecmc-110v-economy-l-bar-sealer-with-20l-x-16w-x-6h-shrink-tunnel-15-x-19-seal-area-110v-power-discharge-conveyor","title":"Sealer Sales SS-1519ECMC-110V Economy L-Bar Sealer with 20\"L x 16\"W x 6\"H Shrink Tunnel, 15\" x 19\" Seal Area, 110V, Power Discharge Conveyor","description":"\u003cp\u003eThe Sealer Sales SS-1519ECMC-110V is a combined L-Bar sealer and shrink tunnel sized for low to medium production at 8 to 10 packages per minute. The L-Bar uses Micro Knife seal technology so the seal head holds up for years of cycles without seal wire replacement. The attached 20\"L x 16\"W x 6\"H shrink tunnel uses a live roller rod conveyor with a fully re-circulating air chamber, AC variable speed drive (0 to 60 feet per minute), digital temperature control, and automatic cool-down + shut-off.\u003c\/p\u003e\u003ch3\u003ePower Discharge Conveyor\u003c\/h3\u003e\u003cp\u003eIncludes a power discharge conveyor that automatically carries sealed packages from the L-Bar seal area into the shrink tunnel without operator handling.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals POF shrink film without the seal wire replacement cycle older L-Bar sealers require. Cast aluminum seal head, heavy-duty frame.\u003c\/p\u003e\u003ch3\u003e6\" Tunnel Opening\u003c\/h3\u003e\u003cp\u003eThe shrink tunnel opening is 20\"L x 16\"W x 6\"H. Live roller rod conveyor moves packages through the chamber while the re-circulating hot air shrinks the film. AC variable speed drive lets the operator set the dwell time for the film gauge and package profile being run.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eSet the chamber temperature once for the film gauge, the controller holds it through the run, and when the operator powers off, the cool-down cycle runs automatically before shut-off to protect the heating elements and conveyor.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF, 60 to 80 Gauge\u003c\/h3\u003e\u003cp\u003eThe combo unit is rated for POF (polyolefin) shrink film at 60 to 80 gauge thickness. PVC is not recommended; PVC byproducts can corrode the seal wire over time and may not shrink consistently in this tunnel profile.\u003c\/p\u003e\u003ch3\u003e110V Configuration\u003c\/h3\u003e\u003cp\u003eThis SKU is the 110V configuration. The 220V option delivers a more efficient shrink tunnel and is the recommended choice for production environments.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502636826909,"sku":"SS-1519ECMC-110V","price":7639.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58225_SS-1519ECMC-110V-img1.jpg?v=1780308331"},{"product_id":"sealer-sales-ss-1519ecmc-220v-economy-l-bar-sealer-with-20l-x-16w-x-6h-shrink-tunnel-15-x-19-seal-area-220v-power-discharge-conveyor","title":"Sealer Sales SS-1519ECMC-220V Economy L-Bar Sealer with 20\"L x 16\"W x 6\"H Shrink Tunnel, 15\" x 19\" Seal Area, 220V, Power Discharge Conveyor","description":"\u003cp\u003eThe Sealer Sales SS-1519ECMC-220V is a combined L-Bar sealer and shrink tunnel sized for low to medium production at 8 to 10 packages per minute. The L-Bar uses Micro Knife seal technology so the seal head holds up for years of cycles without seal wire replacement. The attached 20\"L x 16\"W x 6\"H shrink tunnel uses a live roller rod conveyor with a fully re-circulating air chamber, AC variable speed drive (0 to 60 feet per minute), digital temperature control, and automatic cool-down + shut-off.\u003c\/p\u003e\u003ch3\u003ePower Discharge Conveyor\u003c\/h3\u003e\u003cp\u003eIncludes a power discharge conveyor that automatically carries sealed packages from the L-Bar seal area into the shrink tunnel without operator handling.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals POF shrink film without the seal wire replacement cycle older L-Bar sealers require. Cast aluminum seal head, heavy-duty frame.\u003c\/p\u003e\u003ch3\u003e6\" Tunnel Opening\u003c\/h3\u003e\u003cp\u003eThe shrink tunnel opening is 20\"L x 16\"W x 6\"H. Live roller rod conveyor moves packages through the chamber while the re-circulating hot air shrinks the film. AC variable speed drive lets the operator set the dwell time for the film gauge and package profile being run.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eSet the chamber temperature once for the film gauge, the controller holds it through the run, and when the operator powers off, the cool-down cycle runs automatically before shut-off to protect the heating elements and conveyor.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF, 60 to 80 Gauge\u003c\/h3\u003e\u003cp\u003eThe combo unit is rated for POF (polyolefin) shrink film at 60 to 80 gauge thickness. PVC is not recommended; PVC byproducts can corrode the seal wire over time and may not shrink consistently in this tunnel profile.\u003c\/p\u003e\u003ch3\u003e220V Configuration\u003c\/h3\u003e\u003cp\u003eThis SKU is the 220V configuration. The 220V option delivers a more efficient shrink tunnel and is the recommended choice for production environments.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502636957981,"sku":"SS-1519ECMC-220V","price":7639.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58233_SS-1519ECMC-220V-img1.jpg?v=1780308349"},{"product_id":"sealer-sales-ss-1519ecmc-8-220v-economy-l-bar-sealer-with-20l-x-16w-x-8h-shrink-tunnel-15-x-19-seal-area-220v-power-discharge-conveyor","title":"Sealer Sales SS-1519ECMC-8-220V Economy L-Bar Sealer with 20\"L x 16\"W x 8\"H Shrink Tunnel, 15\" x 19\" Seal Area, 220V, Power Discharge Conveyor","description":"\u003cp\u003eThe Sealer Sales SS-1519ECMC-8-220V is a combined L-Bar sealer and shrink tunnel sized for low to medium production at 8 to 10 packages per minute. The L-Bar uses Micro Knife seal technology so the seal head holds up for years of cycles without seal wire replacement. The attached 20\"L x 16\"W x 8\"H shrink tunnel uses a live roller rod conveyor with a fully re-circulating air chamber, AC variable speed drive (0 to 60 feet per minute), digital temperature control, and automatic cool-down + shut-off.\u003c\/p\u003e\u003ch3\u003ePower Discharge Conveyor\u003c\/h3\u003e\u003cp\u003eIncludes a power discharge conveyor that automatically carries sealed packages from the L-Bar seal area into the shrink tunnel without operator handling.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology cuts and seals POF shrink film without the seal wire replacement cycle older L-Bar sealers require. Cast aluminum seal head, heavy-duty frame.\u003c\/p\u003e\u003ch3\u003e8\" Tunnel Opening\u003c\/h3\u003e\u003cp\u003eThe shrink tunnel opening is 20\"L x 16\"W x 8\"H. Live roller rod conveyor moves packages through the chamber while the re-circulating hot air shrinks the film. AC variable speed drive lets the operator set the dwell time for the film gauge and package profile being run.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eSet the chamber temperature once for the film gauge, the controller holds it through the run, and when the operator powers off, the cool-down cycle runs automatically before shut-off to protect the heating elements and conveyor.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF, 60 to 80 Gauge\u003c\/h3\u003e\u003cp\u003eThe combo unit is rated for POF (polyolefin) shrink film at 60 to 80 gauge thickness. PVC is not recommended; PVC byproducts can corrode the seal wire over time and may not shrink consistently in this tunnel profile.\u003c\/p\u003e\u003ch3\u003e220V Configuration\u003c\/h3\u003e\u003cp\u003eThis SKU is the 220V configuration. The 220V option delivers a more efficient shrink tunnel and is the recommended choice for production environments.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502637089053,"sku":"SS-1519ECMC-8-220V","price":7964.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58240_SS-1519ECMC-8-220V-img1.jpg?v=1780308368"},{"product_id":"sealer-sales-ss-1622mk-combo-fully-adjustable-l-bar-sealer-with-28l-x-18w-x-8h-shrink-tunnel-16-x-22-seal-area-220v-10-to-15-ppm","title":"Sealer Sales SS-1622MK-Combo Fully Adjustable L-Bar Sealer with 28\"L x 18\"W x 8\"H Shrink Tunnel, 16\" x 22\" Seal Area, 220V, 10 to 15 PPM","description":"\u003cp\u003eThe Sealer Sales SS-1622MK-Combo is a fully adjustable combination L-Bar sealer and shrink tunnel on a single unibody frame. The L-Bar is mounted on linear bearings so the operator can slide the seal head forward or back to center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises or lowers the tunnel itself to match the sealer's conveyor height. Throughput is 10 to 15 packages per minute.\u003c\/p\u003e\u003ch3\u003eFully Adjustable Geometry\u003c\/h3\u003e\u003cp\u003eLinear bearings let the L-Bar move forward and back so the operator can center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises the tunnel up or down so the whole package can be tuned to the exact product profile being run.\u003c\/p\u003e\u003ch3\u003eMicro Knife Band Ribbon Seal, No Seal Wire Replacement\u003c\/h3\u003e\u003cp\u003eThe L-Bar uses Micro Knife seal technology. No seal wires to replace, no consumable heating element changeovers. Cast aluminum seal head with seal head return cylinder for consistent pressure.\u003c\/p\u003e\u003ch3\u003e28\" x 18\" x 8\" Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe shrink tunnel chamber is 28\" long, 18\" wide, 8\" high. Live or dead roller rod conveyor, fully re-circulating air chamber, chromed conveyor rollers and shafts to prevent rust. Heats up to 300°F in under 10 minutes and runs quietly enough for next-station packing without ear protection.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control and AC Variable Speed\u003c\/h3\u003e\u003cp\u003eDigital temperature controller, AC variable speed drive, adjustable air velocity control. Automatic tunnel cool-down with shut-off, anti-jam safety on the conveyor, thermal overload protection on all motors, sealed bearings on drive and idler shafts.\u003c\/p\u003e\u003ch3\u003eUnibody Frame on Locking Casters\u003c\/h3\u003e\u003cp\u003eThe L-Bar and tunnel share a single unibody frame on locking casters. Move the entire production cell as one piece. One 8 ft. power cord.\u003c\/p\u003e\u003ch3\u003eRecommended Film: POF\u003c\/h3\u003e\u003cp\u003ePOF shrink film is recommended. PVC is not recommended for this seal head and tunnel profile.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502637154589,"sku":"SS-1622MK-Combo","price":12705.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58247_SS-1622MK-Combo-img1.jpg?v=1780308380"},{"product_id":"sealer-sales-ss-48st-110v-compact-all-in-one-l-bar-sealer-with-hooded-shrink-chamber-12w-x-18-5l-seal-area-110v","title":"Sealer Sales SS-48ST-110V Compact All-in-One L-Bar Sealer with Hooded Shrink Chamber, 12\"W x 18.5\"L Seal Area, 110V","description":"\u003cp\u003eThe Sealer Sales SS-48ST-110V is a compact, all-in-one L-Bar sealer with an integrated hooded shrink chamber. The seal and shrink cycle run in the same unit: the operator places the product on the table, lowers the plexiglass hood, the dual magnets clamp the seal head, the package seals, and the shrink chamber heats and finishes the package in one motion. Complete cycle time is approximately 5 to 10 seconds. This is the right configuration for retail, fulfillment, and small-batch shrink-wrap workflows where the bench footprint matters and a separate sealer + tunnel pair would be overkill.\u003c\/p\u003e\u003ch3\u003eSeal and Shrink in One Unit\u003c\/h3\u003e\u003cp\u003eNo separate shrink tunnel required. The hooded shrink chamber is built into the same chassis as the L-Bar seal head. The dual-mode switch lets the operator choose Seal Only (when sending packages through a downstream tunnel) or Seal + Shrink (using the integrated chamber).\u003c\/p\u003e\u003ch3\u003eMicro Knife Seal Technology\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology seals both PVC and POF shrink films. Unlike most SS-Series L-Bar sealers which are POF-only, the SS-48ST-110V accommodates either film type, giving operators flexibility on stock.\u003c\/p\u003e\u003ch3\u003eDual Magnet Hold-Down for Operator Comfort\u003c\/h3\u003e\u003cp\u003eDual magnets hold the hood closed during the shrink cycle and release automatically when the cycle completes. The operator just lowers the hood and the magnets do the rest, which eliminates the wrist fatigue of holding the seal frame closed manually.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Plexiglass Hood with Adjustable Table\u003c\/h3\u003e\u003cp\u003eThe plexiglass hood gives the operator a clear view of the shrink cycle. The work table lowers 2\" to accommodate taller products. Max package height on this configuration is 6\".\u003c\/p\u003e\u003ch3\u003e3 to 5 Packages Per Minute\u003c\/h3\u003e\u003cp\u003eThroughput is 3 to 5 packages per minute, sized for the format.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502637187357,"sku":"SS-48ST-110V","price":3905.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58254_SS-48ST-110V-img1.jpg?v=1780308395"},{"product_id":"sealer-sales-ss-48st-220v-compact-all-in-one-l-bar-sealer-with-hooded-shrink-chamber-12w-x-18-5l-seal-area-220v","title":"Sealer Sales SS-48ST-220V Compact All-in-One L-Bar Sealer with Hooded Shrink Chamber, 12\"W x 18.5\"L Seal Area, 220V","description":"\u003cp\u003eThe Sealer Sales SS-48ST-220V is a compact, all-in-one L-Bar sealer with an integrated hooded shrink chamber. The seal and shrink cycle run in the same unit: the operator places the product on the table, lowers the plexiglass hood, the dual magnets clamp the seal head, the package seals, and the shrink chamber heats and finishes the package in one motion. Complete cycle time is approximately 5 to 10 seconds. This is the right configuration for retail, fulfillment, and small-batch shrink-wrap workflows where the bench footprint matters and a separate sealer + tunnel pair would be overkill.\u003c\/p\u003e\u003ch3\u003eSeal and Shrink in One Unit\u003c\/h3\u003e\u003cp\u003eNo separate shrink tunnel required. The hooded shrink chamber is built into the same chassis as the L-Bar seal head. The dual-mode switch lets the operator choose Seal Only (when sending packages through a downstream tunnel) or Seal + Shrink (using the integrated chamber).\u003c\/p\u003e\u003ch3\u003eMicro Knife Seal Technology\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology seals both PVC and POF shrink films. Unlike most SS-Series L-Bar sealers which are POF-only, the SS-48ST-220V accommodates either film type, giving operators flexibility on stock.\u003c\/p\u003e\u003ch3\u003eDual Magnet Hold-Down for Operator Comfort\u003c\/h3\u003e\u003cp\u003eDual magnets hold the hood closed during the shrink cycle and release automatically when the cycle completes. The operator just lowers the hood and the magnets do the rest, which eliminates the wrist fatigue of holding the seal frame closed manually.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Plexiglass Hood with Adjustable Table\u003c\/h3\u003e\u003cp\u003eThe plexiglass hood gives the operator a clear view of the shrink cycle. The work table lowers 2\" to accommodate taller products. Max package height on this configuration is 6\".\u003c\/p\u003e\u003ch3\u003e220V Special Order\u003c\/h3\u003e\u003cp\u003eThis SKU is the 220V variant, which ships as a special-order item. Allow additional lead time vs. the 110V version. The 220V configuration is the right choice for facilities with 220V supply or higher-throughput environments.\u003c\/p\u003e\u003ch3\u003e3 to 5 Packages Per Minute\u003c\/h3\u003e\u003cp\u003eThroughput is 3 to 5 packages per minute, sized for the format.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502637220125,"sku":"SS-48ST-220V","price":3905.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58262_SS-48ST-220V-img1.jpg?v=1780308411"},{"product_id":"sealer-sales-ss-76st-compact-all-in-one-l-bar-sealer-with-hooded-shrink-chamber-16w-x-22l-seal-area-220v","title":"Sealer Sales SS-76ST Compact All-in-One L-Bar Sealer with Hooded Shrink Chamber, 16\"W x 22\"L Seal Area, 220V","description":"\u003cp\u003eThe Sealer Sales SS-76ST is a compact, all-in-one L-Bar sealer with an integrated hooded shrink chamber. The seal and shrink cycle run in the same unit: the operator places the product on the table, lowers the plexiglass hood, the dual magnets clamp the seal head, the package seals, and the shrink chamber heats and finishes the package in one motion. Complete cycle time is approximately 5 to 10 seconds. This is the right configuration for retail, fulfillment, and small-batch shrink-wrap workflows where the bench footprint matters and a separate sealer + tunnel pair would be overkill.\u003c\/p\u003e\u003ch3\u003eSeal and Shrink in One Unit\u003c\/h3\u003e\u003cp\u003eNo separate shrink tunnel required. The hooded shrink chamber is built into the same chassis as the L-Bar seal head. The dual-mode switch lets the operator choose Seal Only (when sending packages through a downstream tunnel) or Seal + Shrink (using the integrated chamber).\u003c\/p\u003e\u003ch3\u003eMicro Knife Seal Technology\u003c\/h3\u003e\u003cp\u003eMicro Knife seal technology seals both PVC and POF shrink films. Unlike most SS-Series L-Bar sealers which are POF-only, the SS-76ST accommodates either film type, giving operators flexibility on stock.\u003c\/p\u003e\u003ch3\u003eDual Magnet Hold-Down for Operator Comfort\u003c\/h3\u003e\u003cp\u003eDual magnets hold the hood closed during the shrink cycle and release automatically when the cycle completes. The operator just lowers the hood and the magnets do the rest, which eliminates the wrist fatigue of holding the seal frame closed manually.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Plexiglass Hood with Adjustable Table\u003c\/h3\u003e\u003cp\u003eThe plexiglass hood gives the operator a clear view of the shrink cycle. The work table lowers 2\" to accommodate taller products. Max package height on this configuration is 8\".\u003c\/p\u003e\u003ch3\u003e3 to 5 Packages Per Minute\u003c\/h3\u003e\u003cp\u003eThroughput is 3 to 5 packages per minute, sized for the format.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502637416733,"sku":"SS-76ST","price":4895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58270_SS-76ST-img1.jpg?v=1780308428"},{"product_id":"sealer-sales-st-1606-20-110v-light-duty-shrink-tunnel-16-x-6-x-20-110v","title":"Sealer Sales ST-1606-20-110V Light-Duty Shrink Tunnel, 16\" x 6\" x 20\", 110V","description":"\u003cp\u003eThe Sealer Sales ST-1606-20-110V is a general-purpose entry-level shrink tunnel with a 20\" long x 16\" wide x 6\" high chamber, fully re-circulating four-direction air flow, and a live roller rod conveyor. It heats up to 400 °F with solid-state digital temperature control and runs at 0 to 35 feet per minute on AC variable speed. This is the 110V configuration.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates through the chamber from all four sides, which gives even shrink results across the full surface of the package. Tunnels with single-direction or two-direction air flow leave shrink marks on the underside or one side of bottles and bagged products; the four-direction design is the difference between professional and amateurish-looking shrink wraps. This feature is normally only found on much more expensive tunnels.\u003c\/p\u003e\u003ch3\u003eLive Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eA live roller rod conveyor carries packages through the chamber rather than dragging them on a static surface. The high-density rollers are spaced at 1\/2 inch gap centers, which gives close support so small or unstable packages (cosmetic boxes, supplement bottles, electronics components) do not tip or fall between rollers. The conveyor surface itself is chrome-rod, which resists rust and does not transfer marks to the film.\u003c\/p\u003e\u003ch3\u003eSolid-State Digital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eThe solid-state digital controller holds the chamber at the target setpoint regardless of load. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off. That extends heater life and prevents the warp-and-crack failure mode that takes most tunnel heaters out of service.\u003c\/p\u003e\u003ch3\u003eAC Variable Speed Drive: 0 to 35 FPM\u003c\/h3\u003e\u003cp\u003eAn AC variable speed drive lets the operator dial in the dwell time from 0 to 35 feet per minute for the film gauge and package profile being run. Thicker film and larger packages need more dwell; thinner film and small packages need less. With a knob-and-dial setup, dialing in a new product takes seconds rather than requiring a code change.\u003c\/p\u003e\u003ch3\u003eLocking Casters and Discharge Slide\u003c\/h3\u003e\u003cp\u003eThe tunnel ships on locking casters so the operator can move it between workstations and lock it in place during a run. A discharge slide at the tunnel exit carries finished packages off the conveyor and clear of the chamber so the operator does not have to manually offload at the exit end.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST-1606-20 can be ordered with an optional 8 inch high tunnel opening (for taller packages) and a PTFE mesh belt kit (in place of the live roller rod conveyor) for products that do better on a flat belt. These options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502852407581,"sku":"ST-1606-20-110V","price":3575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58973_ST-1606-20-110V-image1.jpg?v=1780310779"},{"product_id":"sealer-sales-st-1606-20-220v-light-duty-shrink-tunnel-16-x-6-x-20-220v","title":"Sealer Sales ST-1606-20-220V Light-Duty Shrink Tunnel, 16\" x 6\" x 20\", 220V","description":"\u003cp\u003eThe Sealer Sales ST-1606-20-220V is a production entry-level shrink tunnel with a 20\" long x 16\" wide x 6\" high chamber, fully re-circulating four-direction air flow, and a live roller rod conveyor. It heats up to 400 °F with solid-state digital temperature control and runs at 0 to 35 feet per minute on AC variable speed. This is the 220V configuration.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates through the chamber from all four sides, which gives even shrink results across the full surface of the package. Tunnels with single-direction or two-direction air flow leave shrink marks on the underside or one side of bottles and bagged products; the four-direction design is the difference between professional and amateurish-looking shrink wraps. This feature is normally only found on much more expensive tunnels.\u003c\/p\u003e\u003ch3\u003eLive Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eA live roller rod conveyor carries packages through the chamber rather than dragging them on a static surface. The high-density rollers are spaced at 1\/2 inch gap centers, which gives close support so small or unstable packages (cosmetic boxes, supplement bottles, electronics components) do not tip or fall between rollers. The conveyor surface itself is chrome-rod, which resists rust and does not transfer marks to the film.\u003c\/p\u003e\u003ch3\u003eSolid-State Digital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eThe solid-state digital controller holds the chamber at the target setpoint regardless of load. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off. That extends heater life and prevents the warp-and-crack failure mode that takes most tunnel heaters out of service.\u003c\/p\u003e\u003ch3\u003eAC Variable Speed Drive: 0 to 35 FPM\u003c\/h3\u003e\u003cp\u003eAn AC variable speed drive lets the operator dial in the dwell time from 0 to 35 feet per minute for the film gauge and package profile being run. Thicker film and larger packages need more dwell; thinner film and small packages need less. With a knob-and-dial setup, dialing in a new product takes seconds rather than requiring a code change.\u003c\/p\u003e\u003ch3\u003eLocking Casters and Discharge Slide\u003c\/h3\u003e\u003cp\u003eThe tunnel ships on locking casters so the operator can move it between workstations and lock it in place during a run. A discharge slide at the tunnel exit carries finished packages off the conveyor and clear of the chamber so the operator does not have to manually offload at the exit end.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST-1606-20 can be ordered with an optional 8 inch high tunnel opening (for taller packages) and a PTFE mesh belt kit (in place of the live roller rod conveyor) for products that do better on a flat belt. These options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502852440349,"sku":"ST-1606-20-220V","price":3575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58310_ST-1606-20-220V-1.jpg?v=1780308550"},{"product_id":"sealer-sales-st-1808-28-standard-shrink-tunnel-18-x-8-x-28-chamber-220v","title":"Sealer Sales ST-1808-28 Standard Shrink Tunnel, 18\" x 8\" x 28\" chamber, 220V","description":"\u003cp\u003eThe Sealer Sales ST-1808-28 is a standard production shrink tunnel with a 18\"W x 8\"H x 28\"L chamber, fully re-circulating four-direction air flow, a chrome-roller live-rod conveyor, and a 7.5 KW heater bank. It heats up to 300 °F in under 15 minutes and runs at 0 to 75 feet per minute on AC variable speed, sized for steady multi-shift shrink-wrap production. The ST-1808-28 is the 18\"W x 8\"H x 28\"L configuration in the ST family.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates from all four sides of the chamber, which gives even shrink results across the full surface of every package. This is the same four-direction principle as the smaller chamber tunnels in the line, scaled up with a larger blower and heater bank for production throughput.\u003c\/p\u003e\u003ch3\u003e28\"L Chamber and Live Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eThe 18\"W x 8\"H x 28\"L chamber accepts packages up to the chamber height and runs them through on a live roller rod conveyor with chromed rollers and shafts. Chromed rollers resist rust in wet-pack production environments and do not transfer marks to the shrink film. The longer chamber length on the 44\" models gives more dwell at a given conveyor speed, which means faster line speeds for the same shrink quality.\u003c\/p\u003e\u003ch3\u003e7.5 KW Heater Bank and 1\/2 HP Blower\u003c\/h3\u003e\u003cp\u003eThe 7.5 KW heater bank and 1\/2 HP blower together deliver heat to the chamber and recirculate it around the package. Heat-up time from cold is under 15 minutes to 300 °F, so the operator can power the tunnel on at start of shift and have it ready to run before the rest of the line is staged.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eDigital temperature control holds the chamber at the target setpoint through the run; adjustable air velocity control lets the operator tune the air flow against the film gauge and package size. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off, which extends heater life and prevents premature failure.\u003c\/p\u003e\u003ch3\u003eBuilt for Production Use\u003c\/h3\u003e\u003cp\u003eAnti-jam safety on the conveyor and thermal overload protection on all motors keep the tunnel from damaging itself in fault conditions. Sealed bearings on the drive and idler shafts keep service intervals long. The chassis is sized for continuous multi-shift operation rather than batch runs, and the vendor publishes it as the quietest tunnel in its class.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST family accepts a PTFE mesh belt kit in place of the live roller rod conveyor, a stainless steel metal mesh belt for high-temperature or aggressive film, and Falcon belting for specialized package profiles. The standard configuration ships with the roller rod conveyor and 12 inch tunnel opening; these options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502852505885,"sku":"ST-1808-28","price":5610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58314_ST-1808-28-1.jpg?v=1780308558"},{"product_id":"sealer-sales-st-1812-28-standard-shrink-tunnel-18-x-12-x-28-chamber-220v","title":"Sealer Sales ST-1812-28 Standard Shrink Tunnel, 18\" x 12\" x 28\" chamber, 220V","description":"\u003cp\u003eThe Sealer Sales ST-1812-28 is a standard production shrink tunnel with a 18\"W x 12\"H x 28\"L chamber, fully re-circulating four-direction air flow, a chrome-roller live-rod conveyor, and a 7.5 KW heater bank. It heats up to 300 °F in under 15 minutes and runs at 0 to 75 feet per minute on AC variable speed, sized for steady multi-shift shrink-wrap production. The ST-1812-28 is the 18\"W x 12\"H x 28\"L configuration in the ST family.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates from all four sides of the chamber, which gives even shrink results across the full surface of every package. This is the same four-direction principle as the smaller chamber tunnels in the line, scaled up with a larger blower and heater bank for production throughput.\u003c\/p\u003e\u003ch3\u003e28\"L Chamber and Live Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eThe 18\"W x 12\"H x 28\"L chamber accepts packages up to the chamber height and runs them through on a live roller rod conveyor with chromed rollers and shafts. Chromed rollers resist rust in wet-pack production environments and do not transfer marks to the shrink film. The longer chamber length on the 44\" models gives more dwell at a given conveyor speed, which means faster line speeds for the same shrink quality.\u003c\/p\u003e\u003ch3\u003e7.5 KW Heater Bank and 1\/2 HP Blower\u003c\/h3\u003e\u003cp\u003eThe 7.5 KW heater bank and 1\/2 HP blower together deliver heat to the chamber and recirculate it around the package. Heat-up time from cold is under 15 minutes to 300 °F, so the operator can power the tunnel on at start of shift and have it ready to run before the rest of the line is staged.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eDigital temperature control holds the chamber at the target setpoint through the run; adjustable air velocity control lets the operator tune the air flow against the film gauge and package size. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off, which extends heater life and prevents premature failure.\u003c\/p\u003e\u003ch3\u003eBuilt for Production Use\u003c\/h3\u003e\u003cp\u003eAnti-jam safety on the conveyor and thermal overload protection on all motors keep the tunnel from damaging itself in fault conditions. Sealed bearings on the drive and idler shafts keep service intervals long. The chassis is sized for continuous multi-shift operation rather than batch runs, and the vendor publishes it as the quietest tunnel in its class.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST family accepts a PTFE mesh belt kit in place of the live roller rod conveyor, a stainless steel metal mesh belt for high-temperature or aggressive film, and Falcon belting for specialized package profiles. The standard configuration ships with the roller rod conveyor and 12 inch tunnel opening; these options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502852571421,"sku":"ST-1812-28","price":6264.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58317_ST-1812-28-1.jpg?v=1780308566"},{"product_id":"sealer-sales-st-1808-44-medium-duty-shrink-tunnel-18-x-8-x-44-chamber-220v","title":"Sealer Sales ST-1808-44 Medium Duty Shrink Tunnel, 18\" x 8\" x 44\" chamber, 220V","description":"\u003cp\u003eThe Sealer Sales ST-1808-44 is a medium-duty production shrink tunnel with a 18\"W x 8\"H x 44\"L chamber, fully re-circulating four-direction air flow, a chrome-roller live-rod conveyor, and a 9 KW heater bank. It heats up to 300 °F in under 15 minutes and runs at 0 to 75 feet per minute on AC variable speed, sized for steady multi-shift shrink-wrap production. The ST-1808-44 is the 18\"W x 8\"H x 44\"L configuration in the ST family.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates from all four sides of the chamber, which gives even shrink results across the full surface of every package. This is the same four-direction principle as the smaller chamber tunnels in the line, scaled up with a larger blower and heater bank for production throughput.\u003c\/p\u003e\u003ch3\u003e44\"L Chamber and Live Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eThe 18\"W x 8\"H x 44\"L chamber accepts packages up to the chamber height and runs them through on a live roller rod conveyor with chromed rollers and shafts. Chromed rollers resist rust in wet-pack production environments and do not transfer marks to the shrink film. The longer chamber length on the 44\" models gives more dwell at a given conveyor speed, which means faster line speeds for the same shrink quality.\u003c\/p\u003e\u003ch3\u003e9 KW Heater Bank and 1 HP Blower\u003c\/h3\u003e\u003cp\u003eThe 9 KW heater bank and 1 HP blower together deliver heat to the chamber and recirculate it around the package. Heat-up time from cold is under 15 minutes to 300 °F, so the operator can power the tunnel on at start of shift and have it ready to run before the rest of the line is staged.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eDigital temperature control holds the chamber at the target setpoint through the run; adjustable air velocity control lets the operator tune the air flow against the film gauge and package size. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off, which extends heater life and prevents premature failure.\u003c\/p\u003e\u003ch3\u003eBuilt for Production Use\u003c\/h3\u003e\u003cp\u003eAnti-jam safety on the conveyor and thermal overload protection on all motors keep the tunnel from damaging itself in fault conditions. Sealed bearings on the drive and idler shafts keep service intervals long. The chassis is sized for continuous multi-shift operation rather than batch runs, and the vendor publishes it as the quietest tunnel in its class.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST family accepts a PTFE mesh belt kit in place of the live roller rod conveyor, a stainless steel metal mesh belt for high-temperature or aggressive film, and Falcon belting for specialized package profiles. The standard configuration ships with the roller rod conveyor and 12 inch tunnel opening; these options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502852636957,"sku":"ST-1808-44","price":8057.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58320_ST-1808-44-1.jpg?v=1780308574"},{"product_id":"sealer-sales-st-1812-44-medium-duty-shrink-tunnel-18-x-12-x-44-chamber-220v","title":"Sealer Sales ST-1812-44 Medium Duty Shrink Tunnel, 18\" x 12\" x 44\" chamber, 220V","description":"\u003cp\u003eThe Sealer Sales ST-1812-44 is a medium-duty production shrink tunnel with a 18\"W x 12\"H x 44\"L chamber, fully re-circulating four-direction air flow, a chrome-roller live-rod conveyor, and a 9 KW heater bank. It heats up to 300 °F in under 15 minutes and runs at 0 to 75 feet per minute on AC variable speed, sized for steady multi-shift shrink-wrap production. The ST-1812-44 is the 18\"W x 12\"H x 44\"L configuration in the ST family.\u003c\/p\u003e\u003ch3\u003eFour-Direction Recirculating Air Flow\u003c\/h3\u003e\u003cp\u003eHot air recirculates from all four sides of the chamber, which gives even shrink results across the full surface of every package. This is the same four-direction principle as the smaller chamber tunnels in the line, scaled up with a larger blower and heater bank for production throughput.\u003c\/p\u003e\u003ch3\u003e44\"L Chamber and Live Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eThe 18\"W x 12\"H x 44\"L chamber accepts packages up to the chamber height and runs them through on a live roller rod conveyor with chromed rollers and shafts. Chromed rollers resist rust in wet-pack production environments and do not transfer marks to the shrink film. The longer chamber length on the 44\" models gives more dwell at a given conveyor speed, which means faster line speeds for the same shrink quality.\u003c\/p\u003e\u003ch3\u003e9 KW Heater Bank and 1 HP Blower\u003c\/h3\u003e\u003cp\u003eThe 9 KW heater bank and 1 HP blower together deliver heat to the chamber and recirculate it around the package. Heat-up time from cold is under 15 minutes to 300 °F, so the operator can power the tunnel on at start of shift and have it ready to run before the rest of the line is staged.\u003c\/p\u003e\u003ch3\u003eDigital Temperature Control with Automatic Cool-Down\u003c\/h3\u003e\u003cp\u003eDigital temperature control holds the chamber at the target setpoint through the run; adjustable air velocity control lets the operator tune the air flow against the film gauge and package size. When the operator powers down at end of shift, the automatic cool-down cycle runs the blower until the heating elements drop below their thermal limit before shut-off, which extends heater life and prevents premature failure.\u003c\/p\u003e\u003ch3\u003eBuilt for Production Use\u003c\/h3\u003e\u003cp\u003eAnti-jam safety on the conveyor and thermal overload protection on all motors keep the tunnel from damaging itself in fault conditions. Sealed bearings on the drive and idler shafts keep service intervals long. The chassis is sized for continuous multi-shift operation rather than batch runs, and the vendor publishes it as the quietest tunnel in its class.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eThe ST family accepts a PTFE mesh belt kit in place of the live roller rod conveyor, a stainless steel metal mesh belt for high-temperature or aggressive film, and Falcon belting for specialized package profiles. The standard configuration ships with the roller rod conveyor and 12 inch tunnel opening; these options are factory-fitted when you place the order.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51502853423389,"sku":"ST-1812-44","price":8712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58323_ST-1812-44-1.jpg?v=1780308581"},{"product_id":"sealer-sales-cn-4520a-value-shrink-tunnel-17-7-w-x-7-9-h-x-31-5-l-220v","title":"Sealer Sales CN-4520A Value Shrink Tunnel, 17.7\" W x 7.9\" H x 31.5\" L, 220V","description":"\u003cp\u003eThe Sealer Sales CN-4520A is a value-priced 17.7 inch W x 7.9 inch H x 31.5 inch L shrink tunnel designed for continuous shrinking of PVC, POF, and PP shrink films. It features four-direction heating with 10 ceramic replaceable tubes, a live roller rod conveyor, and AC variable speed control from 0 to 20 feet per minute. The 220V configuration ships without a plug (customer-supplied).\u003c\/p\u003e\u003ch3\u003eContinuous Shrinking for PVC, POF, and PP Films\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the three film types used in shrink packaging: PVC, POF (polyolefin), and PP. The chamber and heating profile accommodate all three without configuration changes. Operator powers on, sets the temperature for the film being run, and feeds product through.\u003c\/p\u003e\u003ch3\u003e10 Ceramic Heating Tubes on Four Sides\u003c\/h3\u003e\u003cp\u003eHeating comes from 10 ceramic electric heating tubes positioned on four sides of the chamber. The four-direction heating gives even shrink results across the full surface of the package rather than the underside or one side dominating. The tubes are individually replaceable as wear parts, which keeps the unit serviceable rather than requiring a full heater-bank swap when one element fails.\u003c\/p\u003e\u003ch3\u003eLive Roller Rod Conveyor\u003c\/h3\u003e\u003cp\u003eA live roller rod conveyor carries packages through the chamber rather than dragging them on a static surface. This is what produces the best shrink results: the rotating rollers keep the bottom of the package moving freely while hot air shrinks the film on all sides.\u003c\/p\u003e\u003ch3\u003eAC Variable Speed Drive, 0 to 20 FPM\u003c\/h3\u003e\u003cp\u003eAC variable speed control covers 0 to 20 feet per minute. The operator dials in the speed for the film gauge and package profile being run. Thicker film needs more dwell time at lower speed; thinner film and smaller packages can run faster.\u003c\/p\u003e\u003ch3\u003eTabletop or Free-Standing Configuration\u003c\/h3\u003e\u003cp\u003eThe unit is sized to work either as a tabletop installation (on a packing bench) or as a free-standing installation (on the locking-caster base). Locking casters let the operator move the tunnel between work areas and lock it in place during a run.\u003c\/p\u003e\u003ch3\u003eConfigurable for Your Line\u003c\/h3\u003e\u003cp\u003eOptional PTFE meshed belt available for shrinking smaller items that would fall through the roller gaps. Double-conveyor model (CN-4520AD) available via special order. 220V power configuration ships without a plug, so the customer provides the matching plug for the facility outlet.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51693102760221,"sku":"CN-4520A","price":2970.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58617_CN-4520A-image1_2fc1dc89-1bc5-48f8-bce9-f5a2b3425cb2.jpg?v=1780309186"},{"product_id":"sealer-sales-yc-300hl-l-bar-shrink-film-sealer-11-8-v-x-17-7-h-seal-area-with-film-roller-and-work-table","title":"Sealer Sales YC-300HL L-Bar Shrink Film Sealer, 11.8\" V x 17.7\" H Seal Area, with Film Roller and Work Table","description":"\u003cp\u003eThe Sealer Sales YC-300HL is an L-bar shrink film sealer with a 11.8\" V x 17.7\" H seal length, steel construction, and an electronic timer for sealing control. The unit cuts and seals shrink film in one step for products up to 3.9\" package height. Designed for quick and easy shrink film packaging at pack-out stations and small shrink-wrap operations.\u003c\/p\u003e\u003ch3\u003eCuts and Seals in One Step\u003c\/h3\u003e\u003cp\u003eOne step cuts and seals centerfold shrink film in a single press of the sealing bar. The operator places the product between two layers of film, presses the sealing bar down, and pulls the package free. The element wire seals the edge and cuts off the film in one motion, leaving the package ready for the shrink-tunnel pass or heat-gun finish.\u003c\/p\u003e\u003ch3\u003eAdjustable Film Dispenser Rack\u003c\/h3\u003e\u003cp\u003eThe integrated film dispenser rack feeds centerfold shrink film from a single roll onto the work table. Smooth bearing rollers keep the film moving freely so the operator does not have to fight roll friction or static buildup. Adjustable position lets the operator center the roll for the film width being run.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Steel Construction\u003c\/h3\u003e\u003cp\u003eSteel construction throughout the chassis is sized for daily production use. The seal bar geometry holds calibration through long sessions of repetitive sealing, which is what makes the difference between consistent seals from the first bag to the last vs. seal-quality drift mid-shift.\u003c\/p\u003e\u003ch3\u003eIncludes Work Table with Perforating Hole Punchers\u003c\/h3\u003e\u003cp\u003eThe included work table comes with a film separator (keeps the two film layers parted before the package is loaded), twin perforating hole punchers (vents air from the sealed package so it shrinks tight rather than ballooning), and a film roller. These accessories are typically sold separately on competing L-bar sealers.\u003c\/p\u003e\u003ch3\u003eElectronic Timer Controls Sealing Duration\u003c\/h3\u003e\u003cp\u003eThe electronic timer controls the heat-cycle duration. Different film gauges need different dwell times: thinner film needs less, thicker film needs more. Dialing in the timer for the film being run is a one-time adjustment per shift.\u003c\/p\u003e\u003ch3\u003ePairs with Heat Gun or Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe L-bar sealer is the cut-and-seal stage of a shrink-wrap workflow. The downstream shrink stage uses either a heat gun (for low-volume work) or a shrink tunnel (for production runs). The sealed package goes from the L-bar straight into the heat source where the film shrinks tight around the product.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51699077710109,"sku":"YC-300HL","price":998.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58620_YC-300HL-image1.jpg?v=1780309142"},{"product_id":"sealer-sales-yc-450hl-l-bar-shrink-film-sealer-17-7-v-x-17-7-h-seal-area-with-film-roller-and-work-table","title":"Sealer Sales YC-450HL L-Bar Shrink Film Sealer, 17.7\" V x 17.7\" H Seal Area, with Film Roller and Work Table","description":"\u003cp\u003eThe Sealer Sales YC-450HL is an L-bar shrink film sealer with a 17.7\" V x 17.7\" H seal length, steel construction, and an electronic timer for sealing control. The unit cuts and seals shrink film in one step for products up to 3.9\" package height. Designed for quick and easy shrink film packaging at pack-out stations and small shrink-wrap operations.\u003c\/p\u003e\u003ch3\u003eCuts and Seals in One Step\u003c\/h3\u003e\u003cp\u003eOne step cuts and seals centerfold shrink film in a single press of the sealing bar. The operator places the product between two layers of film, presses the sealing bar down, and pulls the package free. The element wire seals the edge and cuts off the film in one motion, leaving the package ready for the shrink-tunnel pass or heat-gun finish.\u003c\/p\u003e\u003ch3\u003eAdjustable Film Dispenser Rack\u003c\/h3\u003e\u003cp\u003eThe integrated film dispenser rack feeds centerfold shrink film from a single roll onto the work table. Smooth bearing rollers keep the film moving freely so the operator does not have to fight roll friction or static buildup. Adjustable position lets the operator center the roll for the film width being run.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Steel Construction\u003c\/h3\u003e\u003cp\u003eSteel construction throughout the chassis is sized for daily production use. The seal bar geometry holds calibration through long sessions of repetitive sealing, which is what makes the difference between consistent seals from the first bag to the last vs. seal-quality drift mid-shift.\u003c\/p\u003e\u003ch3\u003eIncludes Work Table with Perforating Hole Punchers\u003c\/h3\u003e\u003cp\u003eThe included work table comes with a film separator (keeps the two film layers parted before the package is loaded), twin perforating hole punchers (vents air from the sealed package so it shrinks tight rather than ballooning), and a film roller. These accessories are typically sold separately on competing L-bar sealers.\u003c\/p\u003e\u003ch3\u003eElectronic Timer Controls Sealing Duration\u003c\/h3\u003e\u003cp\u003eThe electronic timer controls the heat-cycle duration. Different film gauges need different dwell times: thinner film needs less, thicker film needs more. Dialing in the timer for the film being run is a one-time adjustment per shift.\u003c\/p\u003e\u003ch3\u003ePairs with Heat Gun or Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe L-bar sealer is the cut-and-seal stage of a shrink-wrap workflow. The downstream shrink stage uses either a heat gun (for low-volume work) or a shrink tunnel (for production runs). The sealed package goes from the L-bar straight into the heat source where the film shrinks tight around the product.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51699091210525,"sku":"YC-450HL","price":1047.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58621_YC-450HL-image1.jpg?v=1780309156"},{"product_id":"sealer-sales-yc-600hl-l-bar-shrink-film-sealer-23-6-v-x-31-4-h-seal-area-with-film-roller-and-work-table","title":"Sealer Sales YC-600HL L-Bar Shrink Film Sealer, 23.6\" V x 31.4\" H Seal Area, with Film Roller and Work Table","description":"\u003cp\u003eThe Sealer Sales YC-600HL is an L-bar shrink film sealer with a 23.6\" V x 31.4\" H seal length, steel construction, and an electronic timer for sealing control. The unit cuts and seals shrink film in one step for products up to 3.5\" package height. Designed for quick and easy shrink film packaging at pack-out stations and small shrink-wrap operations.\u003c\/p\u003e\u003ch3\u003eCuts and Seals in One Step\u003c\/h3\u003e\u003cp\u003eOne step cuts and seals centerfold shrink film in a single press of the sealing bar. The operator places the product between two layers of film, presses the sealing bar down, and pulls the package free. The element wire seals the edge and cuts off the film in one motion, leaving the package ready for the shrink-tunnel pass or heat-gun finish.\u003c\/p\u003e\u003ch3\u003eAdjustable Film Dispenser Rack\u003c\/h3\u003e\u003cp\u003eThe integrated film dispenser rack feeds centerfold shrink film from a single roll onto the work table. Smooth bearing rollers keep the film moving freely so the operator does not have to fight roll friction or static buildup. Adjustable position lets the operator center the roll for the film width being run.\u003c\/p\u003e\u003ch3\u003eHeavy-Duty Steel Construction\u003c\/h3\u003e\u003cp\u003eSteel construction throughout the chassis is sized for daily production use. The seal bar geometry holds calibration through long sessions of repetitive sealing, which is what makes the difference between consistent seals from the first bag to the last vs. seal-quality drift mid-shift.\u003c\/p\u003e\u003ch3\u003eIncludes Work Table with Perforating Hole Punchers\u003c\/h3\u003e\u003cp\u003eThe included work table comes with a film separator (keeps the two film layers parted before the package is loaded), twin perforating hole punchers (vents air from the sealed package so it shrinks tight rather than ballooning), and a film roller. These accessories are typically sold separately on competing L-bar sealers.\u003c\/p\u003e\u003ch3\u003eElectronic Timer Controls Sealing Duration\u003c\/h3\u003e\u003cp\u003eThe electronic timer controls the heat-cycle duration. Different film gauges need different dwell times: thinner film needs less, thicker film needs more. Dialing in the timer for the film being run is a one-time adjustment per shift.\u003c\/p\u003e\u003ch3\u003ePairs with Heat Gun or Shrink Tunnel\u003c\/h3\u003e\u003cp\u003eThe L-bar sealer is the cut-and-seal stage of a shrink-wrap workflow. The downstream shrink stage uses either a heat gun (for low-volume work) or a shrink tunnel (for production runs). The sealed package goes from the L-bar straight into the heat source where the film shrinks tight around the product.\u003c\/p\u003e","brand":"Sealer Sales","offers":[{"title":"Default Title","offer_id":51699094815005,"sku":"YC-600HL","price":1815.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/58622_YC-600HL-image1.jpg?v=1780309169"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/collections\/shrink_wrap_hero.jpg?v=1780559406","url":"https:\/\/thechefstore.com\/collections\/shrink-wrap-machines.oembed","provider":"TheChefStore.Com","version":"1.0","type":"link"}