{"product_id":"everest-ecb52-60d2-60-in-two-drawer-chef-base-refrigerator-717-lb-equipment-capacity-side-mount-blizzard-r290","title":"Everest ECB52-60D2 60 In. Two Drawer Chef Base Refrigerator, 717 Lb. Equipment Capacity, Side Mount Blizzard R290","description":"\u003cp\u003eThe Everest ECB52-60D2 tops Everest's two drawer ECB Series chef base lineup with its longest worktop, a full 60 inches of 16-gauge stainless steel rated for 717 pounds of cooking equipment over the same six pan drawer cabinet as the 53 1\/2 inch model. For a cookline whose equipment battery outruns a standard top, the extra length lands wider gear without giving up the two refrigerated drawers that hold portioned pans at 33°F to 54°F right under the action.\u003c\/p\u003e\u003ch3\u003eAnti-Warp 16-Gauge Worktop Rated to Carry 717 Lbs. of Cooking Equipment\u003c\/h3\u003e\u003cp\u003eHeat is what ruins an ordinary equipment stand, so Everest builds the 16-gauge stainless steel worktop with an extra layer of high-grade insulation and an integrated air chamber with vents that redirect and mitigate the heat coming off the equipment above. Instead of warping under a hot griddle, the top stays flat while the cabinet under it stays cold without driving up energy costs. Thick gauge stainless steel corner guards keep mounted equipment from sliding off the worktop when the line gets bumped, and \u003cb\u003e12-gauge metal caster brackets\u003c\/b\u003e are built to carry the added weight riding on top. Plan the install around one operating rule from Everest: keep a minimum 6 inch clearance between your equipment's heating element and the worktop surface.\u003c\/p\u003e\u003ch3\u003eTwo Refrigerated Drawers with Ball Bearing Frames and 4 In. Deep Pans\u003c\/h3\u003e\u003cp\u003eThe two drawers ship with (6) full size polycarbonate pans, each 4 inches deep, riding in thick gauge stainless steel drawer frames on \u003cb\u003elow-friction ball bearings\u003c\/b\u003e that pull smoothly with every pan loaded. Snap-in, heat resistant magnetic gaskets seal each drawer and pop out by hand for cleaning or replacement, and high strength recessed handles keep the drawer faces flush with the line. Behind them the cabinet is heavy duty stainless steel inside and out with rounded corners, an open interior with no walls between compartments, a galvanized steel bottom and rear, and 2.5 inch thick high density polyurethane insulation in both the cabinet and the drawers. The unit gives you 41 1\/4 inch wide drawer openings.\u003c\/p\u003e\u003ch3\u003eSide Mounted Blizzard R290 Cartridge That Swaps without On-Site Brazing\u003c\/h3\u003e\u003cp\u003eCooling comes from Everest's Blizzard R290, a self-contained, fully detachable condensing unit mounted on the side of the cabinet. Because the whole cartridge is replaceable without on-site brazing, a worn-out system means a swap rather than days of open-flame repair next to your line. Electronically commutated fan motors cool quickly on less energy, a full-length air duct moves cold air across the cabinet, and large capacity, corrosion-resistant condenser and evaporator coils stand up to kitchen conditions. An auto-reverse condenser fan motor supports compressor ventilation and helps keep the condenser coil clean, pressure relief devices let drawers reopen right after closing, and the self-maintaining condensate drain pan evaporates moisture without an external drain line or electric heater. The R290 refrigerant is EPA-compliant with zero ozone depletion potential and a global warming potential of three.\u003c\/p\u003e\u003ch3\u003eDigital Controller That Holds 33°F to 54°F with an Overheat Alarm\u003c\/h3\u003e\u003cp\u003eA multi-function digital controller with an easy to read LED display arrives factory preset at 35°F and adjusts anywhere from 33°F to 54°F to suit what the station stores. Defrost runs on its own time-initiated, temperature-terminated cycle, so there is no manual defrost schedule to keep, and an audible overheat alarm flags trouble at the compressor or condenser coil before product is at risk.\u003c\/p\u003e\u003cp\u003eFrom the factory the base rolls on four 5 inch swivel casters with locks on the front set, plus three front leg stabilizers standard for once it is parked, and heavy duty stainless steel grips give your crew a secure hold when the station moves for cleaning. Everest also offers an optional 3 inch overall height caster assembly (CASA3-01, two front and two rear) and 3.5 to 6 inch height-adjustable, interchangeable legs (AJL03-00) when the cookline needs the worktop to land at a different height.\u003c\/p\u003e\u003cp\u003eThe ECB52-60D2 makes sense when the equipment lineup needs more landing length than its drawers need width: the worktop runs a full 60 inches by 32 1\/8 inches deep and stands 25 inches tall on the standard casters, while the drawer bank below keeps the same 41 1\/4 inch openings and six pan capacity as the 53 1\/2 inch model. If you do not need the overhang, that shorter model saves line space, and four drawer bases from 72 to 96 inches add storage as well as length. It is strictly a refrigerator, with a setting floor of 33°F, so it holds fresh product rather than frozen. Power is a standard 115V\/60Hz single phase connection on a NEMA 5-15P plug with a 9 foot cord.\u003c\/p\u003e","brand":"Everest Refrigeration","offers":[{"title":"Default Title","offer_id":51876543594781,"sku":"ECB52-60D2","price":5157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/60118_2020_ECB52_60D2.jpg?v=1781421067","url":"https:\/\/thechefstore.com\/products\/everest-ecb52-60d2-60-in-two-drawer-chef-base-refrigerator-717-lb-equipment-capacity-side-mount-blizzard-r290","provider":"TheChefStore.Com","version":"1.0","type":"link"}