{"product_id":"omcan-24407-60-in-cabinet-base-work-table-sliding-doors-304-stainless-steel-top-4-in-backsplash","title":"Omcan 24407 60 In. Cabinet Base Work Table, Sliding Doors, 304 Stainless Steel Top, 4 In. Backsplash","description":"\u003cp\u003eThis Omcan cabinet base work table gives you a 60 inch stainless steel work surface with an enclosed cabinet underneath for storing kitchen equipment and other products. It is intended for food preparation in a busy commercial kitchen. Sliding doors close off the base, so what you keep under the work top stays behind doors. The top is 18-gauge type 304 stainless steel, and this is the overhang edge version, with the top larger than the cabinet body beneath it. A 4 inch by 1 inch backsplash runs along the back edge. The unit stands 38 inches high at the top of the backsplash on a 30 inch deep footprint, so measure your wall run and aisle clearance against the 60 inch width. The top is rated for 750 pounds and the undershelf inside the cabinet for 440 pounds. It arrives as a knock-down unit that assembles on site with set screws.\u003c\/p\u003e\n\u003ch3\u003eEnclosed Cabinet Base with Sliding Doors\u003c\/h3\u003e\u003cp\u003eThe base is an enclosed cabinet closed in by a back panel and left and right side panels, with a stainless steel undershelf inside and two sliding doors across the front. The doors ride on slide rails and have recessed handles. The cabinet body measures 53-1\/2 inches wide by 21-3\/4 inches deep, and its bottom sits 12 inches off the floor.\u003c\/p\u003e\n\u003ch3\u003e18-Gauge Type 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eOmcan builds this table in 18-gauge type 304 stainless steel. The top, the legs and the undershelf are all stainless steel, and the table is designed and finished for commercial use, so minor surface marks such as dimples, scratches and scuffs are normal on a product of this kind. The same table is available in type 430 stainless steel as item 24404.\u003c\/p\u003e\n\u003ch3\u003e4-Inch by 1-Inch Backsplash and Overhang Edge\u003c\/h3\u003e\u003cp\u003eThe back edge carries a 4 inch by 1 inch backsplash. The work surface sits 34 inches off the floor and the top of the splash at 38 inches, worth checking if the table slides under a wall shelf. The rest of the top is the overhang edge: The top extends 3-1\/4 inches beyond the cabinet body at each end and 4-1\/8 inches at the front and back. The same table is available without a backsplash as item 24401.\u003c\/p\u003e\n\u003ch3\u003eKnock-Down Design Assembled on Site\u003c\/h3\u003e\u003cp\u003eThe table arrives knocked down with four 34 inch stainless steel legs, the top, two sides, a back, the undershelf with its aluminum die cast clamp, two sliding doors and 36 set screws. The back and sides fasten to the top with set screws, the legs and undershelf assembly insert into gussets, and the doors are installed on the slide rails once the table is upright. The set screws should be filled with an approved silicone sealer, which is not included. The legs finish in stainless steel bullet feet. Optional 5 inch casters are items 47599 (without brake) and 14395 (with brake).\u003c\/p\u003e","brand":"Omcan","offers":[{"title":"Default Title","offer_id":67755869798685,"sku":"24407","price":1456.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4716\/2909\/files\/87225_omcan_24407_1.jpg?v=1791905631","url":"https:\/\/thechefstore.com\/products\/omcan-24407-60-in-cabinet-base-work-table-sliding-doors-304-stainless-steel-top-4-in-backsplash","provider":"TheChefStore.Com","version":"1.0","type":"link"}