The Atosa MBGF48GR Glass Mug Froster
The Atosa MBGF48GR glass froster holds up to 240 eight-inch mugs or 230 ten-ounce steins in its 13.1 cubic foot interior. It chills glasses and plates to 0°F, producing a frosted finish that keeps beer, cocktails, and other beverages cold longer after serving. This unit is built for high-volume bars, restaurants, and breweries that need consistent, ice-cold glassware for every shift.
Chills Glasses to 0°F with R290 Refrigerant
The MBGF48GR maintains temperatures from -8°F to 0°F, ensuring every glass comes out visibly frosted. This sub-freezing range keeps drinks colder for longer and meets customer expectations for presentation. The 1/2 HP compressor uses R290 refrigerant, which provides strong cooling while reducing environmental impact compared to older refrigerants. The system meets current environmental standards without sacrificing performance.
Slide-Out Compressor Assembly with Nine Shelves
The slide-out compressor assembly allows quick access for maintenance without moving or disassembling the unit, reducing downtime and service costs. Nine shelves organize glassware and let cold air circulate evenly, so every glass frosts uniformly no matter where it is placed.
Easy Glide Stainless Steel Lids with Locks
The easy glide stainless steel lids with handles allow smooth opening and closing during high-volume service periods, improving bartender workflow and reducing physical strain during repeated access. The dual-lid design provides separate access to left and right compartments, minimizing cold air loss when retrieving glasses from one side. Standard lid locks secure glassware inventory and prevent unauthorized access when the bar is closed or unattended. Built from stainless steel inside and out, the MBGF48GR resists corrosion, withstands repeated exposure to moisture from condensation, and maintains a professional appearance in demanding bar and restaurant environments.
The electronic temperature controller lets you monitor and adjust internal conditions with precision. Pre-installed casters make it easy to move the unit for cleaning or layout changes. The MBGF48GR runs on standard 115V power with a NEMA 5-15P plug, so no special wiring is needed. At 49 1/2 inches wide, it delivers high-capacity glass frosting for busy operations.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
13.1 cubic foot capacity for high-volume glass frosting
-
Holds approximately 240 eight-inch mugs or 230 ten-ounce steins
-
Maintains temperatures between -8°F and 0°F
-
Chills glasses and plates to 0°F for frosted appearance
-
Heavy duty 1/2 HP compressor
-
Environmentally friendly R290 refrigerant
-
Slide-out compressor assembly for easy maintenance
-
Nine shelves for organized glass storage
-
Stainless steel exterior and interior construction
-
Easy glide stainless steel lids with handles
-
Standard lid locks for security
-
Electronic temperature controller
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
13.1 cubic foot capacity for high-volume glass frosting
Holds approximately 240 eight-inch mugs or 230 ten-ounce steins
Maintains temperatures between -8°F and 0°F
Chills glasses and plates to 0°F for frosted appearance
Heavy duty 1/2 HP compressor
The Atosa MBGF48GR Glass Mug Froster
The Atosa MBGF48GR glass froster holds up to 240 eight-inch mugs or 230 ten-ounce steins in its 13.1 cubic foot interior. It chills glasses and plates to 0°F, producing a frosted finish that keeps beer, cocktails, and other beverages cold longer after serving. This unit is built for high-volume bars, restaurants, and breweries that need consistent, ice-cold glassware for every shift.
Chills Glasses to 0°F with R290 Refrigerant
The MBGF48GR maintains temperatures from -8°F to 0°F, ensuring every glass comes out visibly frosted. This sub-freezing range keeps drinks colder for longer and meets customer expectations for presentation. The 1/2 HP compressor uses R290 refrigerant, which provides strong cooling while reducing environmental impact compared to older refrigerants. The system meets current environmental standards without sacrificing performance.
Slide-Out Compressor Assembly with Nine Shelves
The slide-out compressor assembly allows quick access for maintenance without moving or disassembling the unit, reducing downtime and service costs. Nine shelves organize glassware and let cold air circulate evenly, so every glass frosts uniformly no matter where it is placed.
Easy Glide Stainless Steel Lids with Locks
The easy glide stainless steel lids with handles allow smooth opening and closing during high-volume service periods, improving bartender workflow and reducing physical strain during repeated access. The dual-lid design provides separate access to left and right compartments, minimizing cold air loss when retrieving glasses from one side. Standard lid locks secure glassware inventory and prevent unauthorized access when the bar is closed or unattended. Built from stainless steel inside and out, the MBGF48GR resists corrosion, withstands repeated exposure to moisture from condensation, and maintains a professional appearance in demanding bar and restaurant environments.
The electronic temperature controller lets you monitor and adjust internal conditions with precision. Pre-installed casters make it easy to move the unit for cleaning or layout changes. The MBGF48GR runs on standard 115V power with a NEMA 5-15P plug, so no special wiring is needed. At 49 1/2 inches wide, it delivers high-capacity glass frosting for busy operations.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
13.1 cubic foot capacity for high-volume glass frosting
-
Holds approximately 240 eight-inch mugs or 230 ten-ounce steins
-
Maintains temperatures between -8°F and 0°F
-
Chills glasses and plates to 0°F for frosted appearance
-
Heavy duty 1/2 HP compressor
-
Environmentally friendly R290 refrigerant
-
Slide-out compressor assembly for easy maintenance
-
Nine shelves for organized glass storage
-
Stainless steel exterior and interior construction
-
Easy glide stainless steel lids with handles
-
Standard lid locks for security
-
Electronic temperature controller
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Resources & Downloads
See all from Atosa
Specifications
| Capacity | 13.1 Cu. Ft. |
| Glass Capacity | 240 (8" mugs) or 230 (10 oz steins) |
| Number of Shelves | 9 |
| Temperature Range | -8°F to 0°F |
| Frosting Temperature | 0°F |
| Compressor Power | 1/2 HP |
| Refrigerant | R290 |
| Voltage | 115V / 60Hz / 1-Phase |
| Amps | 4.7 A |
| Plug Type | NEMA 5-15P |
| Casters | 2" |
| Exterior Dimensions | 49 1/2" (W) x 28" (D) x 36 3/4" (H) |
| Net Weight | 271 lbs. |
| Gross Weight | 315 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
13.1 cubic foot capacity for high-volume glass frosting