The Atosa MGF8414GR Worktop Freezer
The Atosa MGF8414GR combines frozen storage and a sturdy prep surface in one space-saving unit for commercial kitchens. Its 17.2 cubic foot capacity keeps ingredients at temperatures between -8°F and 0°F, ensuring reliable storage directly beneath a reinforced stainless steel worktop. The foamed-in-place backsplash maximizes usable space and keeps ingredients within reach during busy prep periods.
Reinforced Stainless Steel Top with Foamed-in-Place Backsplash
The reinforced stainless steel top stands up to heavy prep work, supporting equipment and cutting boards without flexing or sagging. This construction extends the worktop’s service life in high-volume kitchens. The foamed-in-place backsplash forms a sanitary barrier, stopping food debris and liquids from falling behind the unit and making cleanup easier. It also adds insulation along the back of the cabinet.
R290 Refrigerant with Two Pre-Installed Shelves
The 1/4 HP compressor runs on R290 refrigerant, which cools efficiently and meets current environmental standards with a lower global warming potential than older refrigerants. Two epoxy-coated wire shelves, one in each section, organize storage and let cold air circulate evenly. The epoxy finish resists corrosion and wipes clean for easy maintenance.
Self-Closing Doors with Stay Open Feature
The two self-closing doors automatically close from the 90° position to prevent accidental temperature loss during busy prep periods, but feature a stay-open function beyond that angle for loading and unloading ingredients without fighting door closure. This dual-mode operation improves workflow efficiency while protecting food safety. Built from stainless steel inside and out, the MGF8414GR resists corrosion, withstands repeated exposure to moisture and temperature extremes, and maintains a professional appearance in demanding commercial environments. Recessed door handles provide ergonomic access without protruding into traffic areas, while magnetic door gaskets create a positive seal that prevents cold air loss and maintains efficiency.
The electronic temperature controller lets you monitor and adjust internal conditions with precision. Casters come pre-installed for easy movement during cleaning or when rearranging your kitchen. The unit plugs into a standard 115V outlet, so no special wiring is needed. At just over 60 inches wide, it offers generous frozen storage in a compact worktop design.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
17.2 cubic foot capacity for frozen prep storage
-
Two self-closing doors with stay open feature (90° threshold)
-
Maintains temperatures between -8°F and 0°F
-
Reinforced stainless steel top for heavy-duty prep work
-
Foamed-in-place backsplash for sanitary work surface
-
Environmentally friendly R290 refrigerant
-
1/4 HP compressor
-
Stainless steel exterior and interior construction
-
Two pre-installed epoxy-coated wire shelves (one per section)
-
Electronic temperature controller
-
Recessed door handles for space-efficient access
-
Magnetic door gaskets for positive door seal
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Free Shipping
Ships in 2 Business Days
The Atosa MGF8414GR Worktop Freezer
The Atosa MGF8414GR combines frozen storage and a sturdy prep surface in one space-saving unit for commercial kitchens. Its 17.2 cubic foot capacity keeps ingredients at temperatures between -8°F and 0°F, ensuring reliable storage directly beneath a reinforced stainless steel worktop. The foamed-in-place backsplash maximizes usable space and keeps ingredients within reach during busy prep periods.
Reinforced Stainless Steel Top with Foamed-in-Place Backsplash
The reinforced stainless steel top stands up to heavy prep work, supporting equipment and cutting boards without flexing or sagging. This construction extends the worktop’s service life in high-volume kitchens. The foamed-in-place backsplash forms a sanitary barrier, stopping food debris and liquids from falling behind the unit and making cleanup easier. It also adds insulation along the back of the cabinet.
R290 Refrigerant with Two Pre-Installed Shelves
The 1/4 HP compressor runs on R290 refrigerant, which cools efficiently and meets current environmental standards with a lower global warming potential than older refrigerants. Two epoxy-coated wire shelves, one in each section, organize storage and let cold air circulate evenly. The epoxy finish resists corrosion and wipes clean for easy maintenance.
Self-Closing Doors with Stay Open Feature
The two self-closing doors automatically close from the 90° position to prevent accidental temperature loss during busy prep periods, but feature a stay-open function beyond that angle for loading and unloading ingredients without fighting door closure. This dual-mode operation improves workflow efficiency while protecting food safety. Built from stainless steel inside and out, the MGF8414GR resists corrosion, withstands repeated exposure to moisture and temperature extremes, and maintains a professional appearance in demanding commercial environments. Recessed door handles provide ergonomic access without protruding into traffic areas, while magnetic door gaskets create a positive seal that prevents cold air loss and maintains efficiency.
The electronic temperature controller lets you monitor and adjust internal conditions with precision. Casters come pre-installed for easy movement during cleaning or when rearranging your kitchen. The unit plugs into a standard 115V outlet, so no special wiring is needed. At just over 60 inches wide, it offers generous frozen storage in a compact worktop design.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
17.2 cubic foot capacity for frozen prep storage
-
Two self-closing doors with stay open feature (90° threshold)
-
Maintains temperatures between -8°F and 0°F
-
Reinforced stainless steel top for heavy-duty prep work
-
Foamed-in-place backsplash for sanitary work surface
-
Environmentally friendly R290 refrigerant
-
1/4 HP compressor
-
Stainless steel exterior and interior construction
-
Two pre-installed epoxy-coated wire shelves (one per section)
-
Electronic temperature controller
-
Recessed door handles for space-efficient access
-
Magnetic door gaskets for positive door seal
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Resources & Downloads
See all from Atosa
Specifications
| Capacity | 17.2 Cu. Ft. |
| Number of Doors | 2 |
| Number of Shelves | 2 (1 per section) |
| Temperature Range | -8°F to 0°F |
| Compressor Power | 1/4 HP |
| Refrigerant | R290 |
| Voltage | 115V / 60Hz / 1-Phase |
| Amps | 2.6 A |
| Plug Type | NEMA 5-15P |
| Casters | 4" |
| Exterior Dimensions | 60 1/5" (W) x 30" (D) x 39 4/5" (H) |
| Net Weight | 242 lbs. |
| Gross Weight | 290 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

