The Atosa ST2436ECB4 Work table
The Atosa ST2436ECB4 stainless steel work table gives you a sturdy prep surface with a 4-inch rear backsplash to protect walls from splashes and spills. Built from 18-gauge 430 stainless steel, the table stands up to daily use in busy kitchens. The 36 by 24-inch top holds up to 430 pounds, while the adjustable undershelf supports 320 pounds. The 4-inch backsplash shields walls behind sinks or dish stations, and the turned-down front and sides help prevent injuries during prep and cleanup.
4" Rear Backsplash for Superior Wall Protection
The 4-inch backsplash offers twice the protection of standard 2-inch models, keeping water, cleaning chemicals, and food debris off your walls during heavy washdowns or prep. This extra height is ideal for tables next to dishwashers, three-compartment sinks, or any area where splashing is common. The backsplash helps prevent wall damage and stops small items from falling behind the table.
Sound-Deadened Top with Mechanically Polished Satin Finish
The sound-deadening top cuts down on noise from pots and pans, making the kitchen quieter for staff and guests. The satin finish resists scratches and keeps the table looking clean, while the non-reflective surface reduces glare under bright lights.
Turned-Down Front and Side Edges with Adjustable Undershelf
Turned-down front and side edges help prevent cuts when staff reach across or clean the table. The top shelf holds up to 430 pounds, so you can safely use heavy mixers or stack full sheet pans. The sound-deadening design keeps the table sturdy, even under heavy loads. The 30 by 18-inch undershelf holds up to 320 pounds and adjusts to fit different containers or equipment, making the most of your storage space. Stainless steel legs and hat channels resist corrosion from moisture and cleaning chemicals, so the table stays strong even in wet or high-humidity areas. Adjustable bullet feet let you level the table on uneven floors, so liquids do not pool and the surface stays steady for prep work. The table ships knocked down with all hardware included for easy on-site assembly. At 36 by 24 inches, it offers plenty of workspace, and the 4-inch backsplash makes it a good fit near sinks or dish areas where wall protection matters.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
4" raised rear edge backsplash for superior wall protection
-
Sound-deadened top eliminates noise from utensil and equipment contact
-
Mechanically polished satin finish resists scratching and glare
-
Front and side edges turned down for safety
-
18 gauge 430 stainless steel construction throughout
-
Stainless steel tubular legs and undershelf
-
Stainless steel hat channel reinforcement
-
Adjustable undershelf for flexible storage configuration
-
Adjustable bullet feet compensate for uneven flooring
-
Assembly tools included
-
NSF certified
Free Shipping
In Stock: Ships in 1-2 Business Days
4" raised rear edge backsplash for superior wall protection
Sound-deadened top eliminates noise from utensil and equipment contact
Mechanically polished satin finish resists scratching and glare
Front and side edges turned down for safety
18 gauge 430 stainless steel construction throughout
The Atosa ST2436ECB4 Work table
The Atosa ST2436ECB4 stainless steel work table gives you a sturdy prep surface with a 4-inch rear backsplash to protect walls from splashes and spills. Built from 18-gauge 430 stainless steel, the table stands up to daily use in busy kitchens. The 36 by 24-inch top holds up to 430 pounds, while the adjustable undershelf supports 320 pounds. The 4-inch backsplash shields walls behind sinks or dish stations, and the turned-down front and sides help prevent injuries during prep and cleanup.
4" Rear Backsplash for Superior Wall Protection
The 4-inch backsplash offers twice the protection of standard 2-inch models, keeping water, cleaning chemicals, and food debris off your walls during heavy washdowns or prep. This extra height is ideal for tables next to dishwashers, three-compartment sinks, or any area where splashing is common. The backsplash helps prevent wall damage and stops small items from falling behind the table.
Sound-Deadened Top with Mechanically Polished Satin Finish
The sound-deadening top cuts down on noise from pots and pans, making the kitchen quieter for staff and guests. The satin finish resists scratches and keeps the table looking clean, while the non-reflective surface reduces glare under bright lights.
Turned-Down Front and Side Edges with Adjustable Undershelf
Turned-down front and side edges help prevent cuts when staff reach across or clean the table. The top shelf holds up to 430 pounds, so you can safely use heavy mixers or stack full sheet pans. The sound-deadening design keeps the table sturdy, even under heavy loads. The 30 by 18-inch undershelf holds up to 320 pounds and adjusts to fit different containers or equipment, making the most of your storage space. Stainless steel legs and hat channels resist corrosion from moisture and cleaning chemicals, so the table stays strong even in wet or high-humidity areas. Adjustable bullet feet let you level the table on uneven floors, so liquids do not pool and the surface stays steady for prep work. The table ships knocked down with all hardware included for easy on-site assembly. At 36 by 24 inches, it offers plenty of workspace, and the 4-inch backsplash makes it a good fit near sinks or dish areas where wall protection matters.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
4" raised rear edge backsplash for superior wall protection
-
Sound-deadened top eliminates noise from utensil and equipment contact
-
Mechanically polished satin finish resists scratching and glare
-
Front and side edges turned down for safety
-
18 gauge 430 stainless steel construction throughout
-
Stainless steel tubular legs and undershelf
-
Stainless steel hat channel reinforcement
-
Adjustable undershelf for flexible storage configuration
-
Adjustable bullet feet compensate for uneven flooring
-
Assembly tools included
-
NSF certified
Resources & Downloads
See all from Atosa
Specifications
| Material | 18 gauge 430 stainless steel |
| Top Finish | Mechanically polished satin finish |
| Top Treatment | Sound deadened |
| Rear Backsplash | 4" raised edge |
| Front and Side Edges | Turned down |
| Top Shelf Weight Capacity | 430 lbs |
| Undershelf Weight Capacity | 320 lbs |
| Undershelf Dimensions | 30" x 18" |
| Number of Legs | 4 |
| Leg Type | Stainless steel tubular |
| Undershelf | Adjustable height |
| Feet | Adjustable bullet feet (1" adjustment) |
| Reinforcement | Stainless steel hat channel |
| Shipping Configuration | Knocked down (KD) |
| Assembly | Easy assembly, tools included |
| Exterior Dimensions | 36"W x 24"D x 38"H |
| Net Weight | 40 lbs |
| Gross Weight | 44 lbs |
Certifications & Approvals
-
NSF Approved
4" raised rear edge backsplash for superior wall protection