Skip to content
About us Free Shipping Check Order Status Financing Request Quote

Jet-Tech 747HH Deluxe Door Type Warewasher, High-temp, with Booster, 40 Racks Per Hour

SKU747HH BrandJet-Tech
Jet - Tech 747HH Deluxe Door Type Warewasher, High - temp, with Booster, 40 Racks Per Hour - TheChefStore.Com

The Jet-Tech 747HH High Hood Door Type Warewasher

Includes:

  • One 20"x 20" stainless steel 10-place sheet pan rack and
  • One 20" x 20" peg rack for dishes

Optional Accessories:

  • Pressure reducing valve (PRV) kit
  • Splash shield for corner
  • Sheet pan racks
  • Drain water tempering kit

Connecting the 747

This dishwasher must be installed on a level, rigid, nonflammable surface. Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting the leveling. Be sure to provide adequate space for water, drain and electrical connections.

Water Supply:

A 3/4" NPT fitting is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water flow pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds the prescribed amount, you will get inconsistent washing temperature, premature parts failure and thus may void the warranty. Incoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. This type hose is standard for most warewashing machines. Fittings should be available from your local hardware or plumbing supply house. Flexible hoses must be used to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended.

Drain:

This dishwasher has a gravity drain. Maximum height of the drain should not exceed 20" (50cm). A 1.5" ID flexible drain hose is recommended to facilitate maintenance and servicing of the machine.

Electrical:

A 208-240 volt, 60 Hz, Single Phase or Three Phase circuit is required for this unit. Check the rating plate on the machine for amp draw. Pump rotation must be verified on 3 phase units at time of install. In spite of the fact that the rating plate shows 208 volts, the unit is designed function properly from 208 volts to 240 volts. The bottom cover (under the controls) is snapped in to position and should be removed. The terminal block is located in the base of the unit, on the left side. Pass the cable through the cable strain relief at the back and connect the wires to the terminals L1 (brown wire), L2 (blue wire), L3 (black wire) & Ground (yellow & green wire). There should be sufficient cable length to permit the machine to be pulled out for service.

DO NOT manually fill wash tank with water. The dishwasher will fill automatically when the power is turned ON.

Important Note

Reasonable access to and around the machine for service must be provided. Disconnecting of hard plumbing or removal of counter tops or cabinets, etc., for servicing is not covered by warranty. Verify rotation of the pumps for three phase unit.

All panels must be replaced on the unit when the installation is completed.

Product Features

  1. Built-in booster for superior sanitation
  2. Fully automatic program with wash phase at 150F and final rinse phase at 185F
  3. Capacity: 40 racks per hour
  4. Wash dishes or trays with a maximum height of 26"
  5. 24" x 24" foot print cabinet
  6. Stainless steel wash and rinse arms
  7. Built-in rinse-additive and detergent pump for sparkling results
  8. High hood opening facilitates the washing of tall items
  9. Completely automatic wash and rinse programs with a wash cycle of 150°F (65°C) with detergent and rinse cycle of 185°F (85°C)
  10. Model 747HH is built with twin wash motor pumps of 1 HP each (total of 2 HP) for greater power and enhanced performance
  11. Insulated lower cabinet provides for a quieter operation
  12. Automatic adjustable detergent and rinse-additive pumps are provided as standard equipment
  13. Large capacity opening permits the washing of sheet pans and mixing bowls of up to 26" high by 20" wide
  14. Door-activated automatic start and stop mechanism for ease and convenience
  15. Designed to be installed either in a corner or straight pass-thru set-up
  16. Body, external hausing, wash tank, adustable bullet feet and all chassis compnents are of 16 Ga. Type 304 polished stainless steel
  17. Individual wash pumps for upper and lower washing assemblies
  18. Fully enclosed insulated lower cabinet provides a quieter operation
  19. Safety micro-switch on doors to interrupt wash pumps
  20. Three way sliding counter balanced doors assembled with heavy duty stainless steel bushing and door handle for ease of operation and durability
  21. Independently-operated heating elements alternating between the booster and wash reduces overall energy costs
  22. Automatic filling and regulation of the water level of the tank
  23. Wash tank fabricated with an intergrated set of perforated stainless steel scrap filters which are easily removed for quick cleaning and proper maintenance
  24. Two individual scrap filters protect the twin wash-motor pumps
  25. Lower front and side panels are easily removed for technical access
  26. Individual digital gauges for both wash and rinse temperatures

Free Shipping

Usually ships in 2 Business Days

$14,663.25  /  each
  • Built-in booster for superior sanitation
  • Fully automatic program with wash phase at 150F and final rinse phase at 185F
  • Capacity: 40 racks per hour
  • Wash dishes or trays with a maximum height of 26"
  • 24" x 24" foot print cabinet
    • See full feature list

    Product Resources

    Specifications

    Equipment Type Pan Washer
    Brand Jet-Tech
    Rack capacity 19.75"" x 19.75 (500 mm x 500 mm)
    Complete operating cycle 105 seconds wash and 15 seconds rinse
    Wash tank capacity 11.5 U.S. gallons (43.5 litres)
    Wash tank element 6000 watts (6 Kw)
    Wash temperature 150°F (65°C)
    Booster capacity 2.7 U.S. gallons (10.2 litres)
    Booster element 9000 watts (9 Kw)
    Rinse (water) temperature 185°F - 194°F (85°C - 90°C)
    Maximum power absorption 11,100 watts
    Wash motor-pump Dual pumps each of 1 HP (total 2 HP) with thermal overload protection
    Power supply 208-240/60/1 or 3 phase (please specify when ordering)
    Amperage Single phase - 50 amps Three phase - 29 amps
    Water consumption 1 U.S. gallon per cycle (3.8 litres)
    Water consumption per hour 49.75 U.S. gallons (188.3 litres max.)
    Water supply 1/2“ hot water supply 140°F / 60°C
    Recommended pressure 30 p.s.i. (dynamic) (PRV may be required)
    Water inlet connection 3/4"" male garden hose connector (hose included)
    Drain connection 1.5"" ID (38 mm) hose connection (hose included)
    Width 42.5"
    Height 98.5"
    Depth 29"
    Shipping Weight 352 lbs.

    Warranty

      1 year

      Labor;1

    • CE
      ETL Sanitation Listed
    • CETLUS
      ETL US & Canada
    • ENERGYSTAR
      Energy Star Certified

    TheChefStore.com is your online destination for commercial food service equipment. We are committed to making your food service equipment shopping experience a success. We are constantly investing in product information development so that our customers have the resources that they need in order to properly understand the products that they are purchasing. If you ever need help with understanding product specifications or you need a product recommendation for a specific use case, please give us a call. We receive ongoing product training from the manufacturers that our dealership represents in order to make sure that our customers are always well informed and up to date. We pride ourselves on our core expertise; which is to provide answers to our customers' questions, guiding them through the decision making process, and ultimately helping them make the right equipment purchasing decisions for their enterprise.

    We're here to help our customers. That means that we don't consider any job to be too big or too small. From national food chains to small mom and pop shops, we work hard to make sure to each project is completed to customer satisfaction; every time. From the time you place your order until delivery, we strive to make sure the process is as smooth as possible. We are constantly analyzing our processes and implementing the technology necessary to make things faster and easier. Our goal is to use technology to achieve maximum efficiency in communicating with our customers and vendors, and minimizing the time from order until delivery. 

    We carry all major brands of restaurant equipment. We have close to 80,000 items available and our catalog is always growing. If there's a particular item or brand that you are looking for and it's not on our website, please ask us about it, chances are that we have it. Not to mention, we aim to provide the lowest prices online. Through leveraging manufacturer and buying group relationships, freight programs, rebate programs, etc., we are able to purchase equipment at large discounts and pass along the savings to our customers.

     


    We're exited to serve you next!     

    The Jet-Tech 747HH High Hood Door Type Warewasher

    Includes:

    • One 20"x 20" stainless steel 10-place sheet pan rack and
    • One 20" x 20" peg rack for dishes

    Optional Accessories:

    • Pressure reducing valve (PRV) kit
    • Splash shield for corner
    • Sheet pan racks
    • Drain water tempering kit

    Connecting the 747

    This dishwasher must be installed on a level, rigid, nonflammable surface. Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting the leveling. Be sure to provide adequate space for water, drain and electrical connections.

    Water Supply:

    A 3/4" NPT fitting is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water flow pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds the prescribed amount, you will get inconsistent washing temperature, premature parts failure and thus may void the warranty. Incoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. This type hose is standard for most warewashing machines. Fittings should be available from your local hardware or plumbing supply house. Flexible hoses must be used to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended.

    Drain:

    This dishwasher has a gravity drain. Maximum height of the drain should not exceed 20" (50cm). A 1.5" ID flexible drain hose is recommended to facilitate maintenance and servicing of the machine.

    Electrical:

    A 208-240 volt, 60 Hz, Single Phase or Three Phase circuit is required for this unit. Check the rating plate on the machine for amp draw. Pump rotation must be verified on 3 phase units at time of install. In spite of the fact that the rating plate shows 208 volts, the unit is designed function properly from 208 volts to 240 volts. The bottom cover (under the controls) is snapped in to position and should be removed. The terminal block is located in the base of the unit, on the left side. Pass the cable through the cable strain relief at the back and connect the wires to the terminals L1 (brown wire), L2 (blue wire), L3 (black wire) & Ground (yellow & green wire). There should be sufficient cable length to permit the machine to be pulled out for service.

    DO NOT manually fill wash tank with water. The dishwasher will fill automatically when the power is turned ON.

    Important Note

    Reasonable access to and around the machine for service must be provided. Disconnecting of hard plumbing or removal of counter tops or cabinets, etc., for servicing is not covered by warranty. Verify rotation of the pumps for three phase unit.

    All panels must be replaced on the unit when the installation is completed.

    Product Features

    1. Built-in booster for superior sanitation
    2. Fully automatic program with wash phase at 150F and final rinse phase at 185F
    3. Capacity: 40 racks per hour
    4. Wash dishes or trays with a maximum height of 26"
    5. 24" x 24" foot print cabinet
    6. Stainless steel wash and rinse arms
    7. Built-in rinse-additive and detergent pump for sparkling results
    8. High hood opening facilitates the washing of tall items
    9. Completely automatic wash and rinse programs with a wash cycle of 150°F (65°C) with detergent and rinse cycle of 185°F (85°C)
    10. Model 747HH is built with twin wash motor pumps of 1 HP each (total of 2 HP) for greater power and enhanced performance
    11. Insulated lower cabinet provides for a quieter operation
    12. Automatic adjustable detergent and rinse-additive pumps are provided as standard equipment
    13. Large capacity opening permits the washing of sheet pans and mixing bowls of up to 26" high by 20" wide
    14. Door-activated automatic start and stop mechanism for ease and convenience
    15. Designed to be installed either in a corner or straight pass-thru set-up
    16. Body, external hausing, wash tank, adustable bullet feet and all chassis compnents are of 16 Ga. Type 304 polished stainless steel
    17. Individual wash pumps for upper and lower washing assemblies
    18. Fully enclosed insulated lower cabinet provides a quieter operation
    19. Safety micro-switch on doors to interrupt wash pumps
    20. Three way sliding counter balanced doors assembled with heavy duty stainless steel bushing and door handle for ease of operation and durability
    21. Independently-operated heating elements alternating between the booster and wash reduces overall energy costs
    22. Automatic filling and regulation of the water level of the tank
    23. Wash tank fabricated with an intergrated set of perforated stainless steel scrap filters which are easily removed for quick cleaning and proper maintenance
    24. Two individual scrap filters protect the twin wash-motor pumps
    25. Lower front and side panels are easily removed for technical access
    26. Individual digital gauges for both wash and rinse temperatures

    Specifications

    Equipment Type Pan Washer
    Brand Jet-Tech
    Rack capacity 19.75"" x 19.75 (500 mm x 500 mm)
    Complete operating cycle 105 seconds wash and 15 seconds rinse
    Wash tank capacity 11.5 U.S. gallons (43.5 litres)
    Wash tank element 6000 watts (6 Kw)
    Wash temperature 150°F (65°C)
    Booster capacity 2.7 U.S. gallons (10.2 litres)
    Booster element 9000 watts (9 Kw)
    Rinse (water) temperature 185°F - 194°F (85°C - 90°C)
    Maximum power absorption 11,100 watts
    Wash motor-pump Dual pumps each of 1 HP (total 2 HP) with thermal overload protection
    Power supply 208-240/60/1 or 3 phase (please specify when ordering)
    Amperage Single phase - 50 amps Three phase - 29 amps
    Water consumption 1 U.S. gallon per cycle (3.8 litres)
    Water consumption per hour 49.75 U.S. gallons (188.3 litres max.)
    Water supply 1/2“ hot water supply 140°F / 60°C
    Recommended pressure 30 p.s.i. (dynamic) (PRV may be required)
    Water inlet connection 3/4"" male garden hose connector (hose included)
    Drain connection 1.5"" ID (38 mm) hose connection (hose included)
    Width 42.5"
    Height 98.5"
    Depth 29"
    Shipping Weight 352 lbs.

    Warranty

      1 year

      Labor;1

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch