Jet-Tech 757-EV 29 In. Ventless Door-Type High-Temp Dishwasher, Heat Recovery, OneGO Electronic Controls, 60 Racks/Hr

The Jet-Tech 757-EV is a ventless door-type high-temperature dishwasher with a built-in heat recovery module that eliminates the need for an external exhaust hood or ventilation system. When you open the door after a cycle, there is no burst of steam into the kitchen because the recovery module captures the steam and vapor from the wash chamber and uses that heat to preheat incoming fresh water. That preheating means the booster has less work to do reaching sanitizing temperature, which saves energy and speeds up recovery time between racks. Incoming water only needs to be 77 degrees Fahrenheit (compared to 122 degrees or higher for conventional machines), because the heat recovery system handles the rest. The ThermoStop system guarantees the final rinse reaches 180 degrees Fahrenheit every cycle for NSF high-temperature sanitizing. The OneGO electronic control system with LED interface gives you four programmable wash cycles at 1, 2, 3, or 4 minutes through soft-touch buttons, and the SmartSelf diagnostics put service information at your fingertips if something needs attention. The EasyGO soft-start washing system ramps up gradually to protect delicate glassware and china from chippage and breakage. At 60 racks per hour, the 757-EV handles high-volume operations while the stainless steel revolving wash and rinse arms deliver thorough coverage across the full 19.75 by 19.75 inch rack. The inner washing chamber features coved corners and a one-piece stamped wash tank for the most sanitary environment possible, and the unique stainless steel rack support glide system lets you switch between in-line and corner configurations without tools. Standard equipment includes one open combination rack, one peg dish rack, and fill and drain hoses.

Heavy-Duty Stainless Steel Construction with Integrated Booster Heater

The body, external housing, wash tank, and all chassis components are brushed 304 stainless steel. The integrated booster heater is AISI 18/10 stainless steel, heating incoming water to the sanitizing range required for high-temperature warewashing without needing a separate external booster unit. Independently operated heating elements alternate between the booster and wash tank, which reduces the peak electrical draw at any given moment and cuts energy costs over a full shift. Automatic fill and water level regulation keeps the wash tank topped off to the correct operating level as water is consumed during each cycle, so you do not need to manually monitor or add water between racks. A safety micro-switch on the door interrupts the wash motor-pumps the moment the door is opened, preventing water from spraying onto the operator or the floor.

Front-Mounted Control Panel with Digital Temperature Displays

The front-mounted control panel puts temperature readouts and cycle controls where you can see them without bending down or reaching behind the machine. Digital temperature displays show both wash and rinse temperatures independently, so you can verify at a glance that the unit is holding proper sanitizing temps before loading the next rack. Automatic peristaltic pumps dispense liquid detergent and rinse additive at the correct concentration during each cycle, eliminating the guesswork of manual chemical dosing. The wash pumps are protected by built-in scrap filters that catch food debris before it reaches the pump impeller, and these filters lift out for quick cleaning at the end of each shift.

The 757-EV measures 29.3 inches wide by 31.5 inches deep by 89.4 inches high. It accepts 208-240V/60Hz power through a single-point electrical connection, available in either single phase (48.0 amps) or three phase (28.5 amps). The 4.0 KW tank heating element and 9.0 KW booster heating element produce a total maximum power rating of 10.0 KW. The 5.25 gallon wash tank and 2.62 gallon booster are paired with a 1 HP wash pump. Water consumption is 0.74 gallons per cycle at 30 psi, and incoming water pressure should be between 21 and 36 psi. The door provides 18.75 inches of vertical clearance with an ergonomic handle, and an automatic start cycle begins washing the moment the hood closes. Adjustable bullet-style feet handle uneven floors. Machine weight is 330 lbs and shipping weight is 370 lbs.