Skip to content

Westlake SK-729 700 lb. Ice Machine with Bin, Full Cube, Air Cooled, 440 lb. Storage

SKUSK-729 BrandWestlake

The Westlake SK-729 Ice Machine

The Westlake SK-729 is a full cube ice machine with its storage bin: a 700 lb per day air-cooled ice maker on a 440 lb bin, in a 29.9 in. wide stack. It drops 260 cubes every 15 to 17 minutes, about 29 lb an hour, which is enough to feed a bar, a soda fountain, and kitchen ice baths from one machine. The 700 lb figure is rated at 70 °F air and 50 °F water, and hot air or warm supply water will lower it. It is sized for a high-volume restaurant, a hotel floor, or a cafeteria; note that the bin holds a bit under two thirds of a day's production, so it suits a kitchen that draws ice all day more than one that needs 700 lb banked for a single event. It needs a 220 V supply and uses a NEMA 6-20P plug on a 71 in. cord, and it stands 68.7 in. tall and 33.9 in. deep on adjustable legs.

700 lb of Full Cube Ice per 24 Hours

Rated output is 700 lb of full cube ice per 24 hours at 70 °F ambient air and 50 °F water. Each harvest drops 260 cubes on a 15 to 17 minute cycle, which works out to about 29 lb an hour. Treat the rating as a best-case number: a machine pulling hot kitchen air across its condenser makes less ice than one in a cool room, so place it where the air is coolest.

440 lb Storage Bin Under the Ice Maker

The bin under the head stores 440 lb. Here the ice maker outruns the storage: the bin holds a bit under two thirds of a day's production, where a smaller head on the same bin would nearly fill a day's worth. For you that means fast recovery. Empty half the bin during a rush and the head puts it back in under eight hours at the rated pace. Access is through the front bin door, and the adjustable legs, 6.2 to 7 in. tall, let you level the stack.

Digital Control Panel with Fault Codes and Adjustable Ice Thickness

The digital panel shows machine status and a countdown, and it puts an error code on the display when something goes wrong, so whoever is closing can tell you what the machine said and not just that it stopped. A voice fault alert announces the problem as well. You can also adjust ice thickness from the panel: run a thicker cube for spirits on the rocks, where slow melt matters, or a thinner one for fountain drinks and iced tea.

Automatic Cleaning, Side Air Filters, and an Included Water Filter

Press one button and the machine runs its automatic cleaning cycle, which takes most of the excuses out of routine cleaning. Removable air filters on both sides of the head catch lint and grease-laden dust before they reach the condenser; pull them, rinse them, and slide them back. One water filter is included for the supply line, so the water going into your ice is filtered from day one.

304 Stainless Steel on a Riveted, Weld-Free Frame

The machine is built from 304 stainless steel, with 316 stainless steel used for some parts, and the frame is riveted with no welds. Parts that touch water and ice are food grade ABS and PE. In practice that means an exterior you can wipe down with the rest of the kitchen and an interior made from materials meant for food contact.

R290 Air-Cooled Refrigeration

An air-cooled condenser in the head handles heat rejection, so there is no condenser water line to run, and the system is charged with R290 refrigerant. The unit draws 1500 W on 220 V. Because the head cools itself with room air through the side filters, leave those sides able to breathe; a machine boxed in tight will work harder and make less ice.

About Westlake

Westlake Kitchen manufactures commercial refrigeration and cooking equipment for restaurants, bars, cafés, and other foodservice operations. Its product line includes reach-in refrigerators and freezers, refrigerated prep tables, ice machines, merchandisers, ranges, griddles, and fryers. Westlake refrigeration equipment features stainless steel construction, with select models using Embraco compressors and R290 refrigerant. Many models carry ETL, NSF, or DOE certifications, addressing commercial safety, sanitation, and energy requirements. The company offers equipment configurations suited to compact workstations, high-volume kitchens, and different food preparation needs. Its designs emphasize practical storage capacity, temperature control, accessible controls, and efficient use of kitchen space.\

Features & Benefits

  1. Full cube ice maker and storage bin in one stacked unit for restaurants, bars, and beverage service
  2. Storage bin beneath the head with a front-opening door for scooping
  3. Digital control panel with status indication, countdown, and on-screen fault codes
  4. Adjustable ice thickness setting to match the cube to the drink
  5. Voice fault alert system that announces errors out loud
  6. One-button automatic cleaning cycle
  7. Removable air filters on both sides of the head for quick rinsing and replacement
  8. One included water filter for the supply line
  9. Air-cooled condenser with R290 refrigerant
  10. 304 stainless steel construction, with 316 stainless steel used on some parts
  11. Riveted, weld-free sheet metal frame
  12. Food grade ABS and PE materials
  13. Adjustable legs for leveling on uneven floors
  14. Cord-and-plug connection on a long factory cord

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$3,799.05
  • Full cube ice maker and storage bin in one stacked unit for restaurants, bars, and beverage service
  • Storage bin beneath the head with a front-opening door for scooping
  • Digital control panel with status indication, countdown, and on-screen fault codes
  • Adjustable ice thickness setting to match the cube to the drink
  • Voice fault alert system that announces errors out loud
  • See full feature list

    The Westlake SK-729 Ice Machine

    The Westlake SK-729 is a full cube ice machine with its storage bin: a 700 lb per day air-cooled ice maker on a 440 lb bin, in a 29.9 in. wide stack. It drops 260 cubes every 15 to 17 minutes, about 29 lb an hour, which is enough to feed a bar, a soda fountain, and kitchen ice baths from one machine. The 700 lb figure is rated at 70 °F air and 50 °F water, and hot air or warm supply water will lower it. It is sized for a high-volume restaurant, a hotel floor, or a cafeteria; note that the bin holds a bit under two thirds of a day's production, so it suits a kitchen that draws ice all day more than one that needs 700 lb banked for a single event. It needs a 220 V supply and uses a NEMA 6-20P plug on a 71 in. cord, and it stands 68.7 in. tall and 33.9 in. deep on adjustable legs.

    700 lb of Full Cube Ice per 24 Hours

    Rated output is 700 lb of full cube ice per 24 hours at 70 °F ambient air and 50 °F water. Each harvest drops 260 cubes on a 15 to 17 minute cycle, which works out to about 29 lb an hour. Treat the rating as a best-case number: a machine pulling hot kitchen air across its condenser makes less ice than one in a cool room, so place it where the air is coolest.

    440 lb Storage Bin Under the Ice Maker

    The bin under the head stores 440 lb. Here the ice maker outruns the storage: the bin holds a bit under two thirds of a day's production, where a smaller head on the same bin would nearly fill a day's worth. For you that means fast recovery. Empty half the bin during a rush and the head puts it back in under eight hours at the rated pace. Access is through the front bin door, and the adjustable legs, 6.2 to 7 in. tall, let you level the stack.

    Digital Control Panel with Fault Codes and Adjustable Ice Thickness

    The digital panel shows machine status and a countdown, and it puts an error code on the display when something goes wrong, so whoever is closing can tell you what the machine said and not just that it stopped. A voice fault alert announces the problem as well. You can also adjust ice thickness from the panel: run a thicker cube for spirits on the rocks, where slow melt matters, or a thinner one for fountain drinks and iced tea.

    Automatic Cleaning, Side Air Filters, and an Included Water Filter

    Press one button and the machine runs its automatic cleaning cycle, which takes most of the excuses out of routine cleaning. Removable air filters on both sides of the head catch lint and grease-laden dust before they reach the condenser; pull them, rinse them, and slide them back. One water filter is included for the supply line, so the water going into your ice is filtered from day one.

    304 Stainless Steel on a Riveted, Weld-Free Frame

    The machine is built from 304 stainless steel, with 316 stainless steel used for some parts, and the frame is riveted with no welds. Parts that touch water and ice are food grade ABS and PE. In practice that means an exterior you can wipe down with the rest of the kitchen and an interior made from materials meant for food contact.

    R290 Air-Cooled Refrigeration

    An air-cooled condenser in the head handles heat rejection, so there is no condenser water line to run, and the system is charged with R290 refrigerant. The unit draws 1500 W on 220 V. Because the head cools itself with room air through the side filters, leave those sides able to breathe; a machine boxed in tight will work harder and make less ice.

    About Westlake

    Westlake Kitchen manufactures commercial refrigeration and cooking equipment for restaurants, bars, cafés, and other foodservice operations. Its product line includes reach-in refrigerators and freezers, refrigerated prep tables, ice machines, merchandisers, ranges, griddles, and fryers. Westlake refrigeration equipment features stainless steel construction, with select models using Embraco compressors and R290 refrigerant. Many models carry ETL, NSF, or DOE certifications, addressing commercial safety, sanitation, and energy requirements. The company offers equipment configurations suited to compact workstations, high-volume kitchens, and different food preparation needs. Its designs emphasize practical storage capacity, temperature control, accessible controls, and efficient use of kitchen space.\

    Features & Benefits

    1. Full cube ice maker and storage bin in one stacked unit for restaurants, bars, and beverage service
    2. Storage bin beneath the head with a front-opening door for scooping
    3. Digital control panel with status indication, countdown, and on-screen fault codes
    4. Adjustable ice thickness setting to match the cube to the drink
    5. Voice fault alert system that announces errors out loud
    6. One-button automatic cleaning cycle
    7. Removable air filters on both sides of the head for quick rinsing and replacement
    8. One included water filter for the supply line
    9. Air-cooled condenser with R290 refrigerant
    10. 304 stainless steel construction, with 316 stainless steel used on some parts
    11. Riveted, weld-free sheet metal frame
    12. Food grade ABS and PE materials
    13. Adjustable legs for leveling on uneven floors
    14. Cord-and-plug connection on a long factory cord

    Resources & Downloads

    See all from Westlake

    Specifications

    Ice TypeFull cube
    Ice Production per 24 Hours700 lb
    Production Rating Conditions70 °F air, 50 °F water
    Bin Storage Capacity440 lb
    Cubes per Harvest260
    Harvest Cycle15 to 17 min
    ConfigurationIce maker head on storage bin
    CondenserAir cooled
    RefrigerantR290
    Voltage220 V
    Frequency60 Hz
    Wattage1500 W
    PlugNEMA 6-20P
    Cord Length71 in.
    Width29.9 in.
    Depth33.9 in.
    Height68.7 in.
    Head Height22.3 in.
    Head Depth23.4 in.
    Leg Height6.2 to 7 in., adjustable
    Construction304 stainless steel, some 316 stainless parts
    FrameRiveted, weld-free
    Food Contact MaterialsFood grade ABS and PE
    ControlsDigital panel, fault codes, adjustable ice thickness
    Fault AlertOn-panel code and voice alert
    CleaningAutomatic cleaning cycle
    Air FilterRemovable, both sides
    Water Filter1 included

    Manufacturer's Warranty

    • 6 Year

      Compressor

    • 2 Year

      Labor

    • 2 Year

      Parts

    Certifications & Approvals

    • CETLUS
      ETL US & Canada
    • ENERGYSTAR
      Energy Star Certified
    • ETLSAN
      ETL Sanitation

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Westlake SK-729 Ice Machine

    About Air Cooled Ice Machines

    A commercial air cooled ice machine rejects condenser heat into the surrounding air with a fan, so it needs no cooling water line, no second drain, and no remote condenser on the roof. That makes it the simplest ice machine to install and the cheapest to run in a standard restaurant, bar, or hotel setting. Air cooled ice machines on this page produce 50 to nearly 2,000 pounds of ice per day in full dice, half dice, regular cube, nugget, and flake shapes.

    Modular ice machine heads sit on a separate storage bin or dispenser and handle high-volume service, with correctional versions in stainless panels for secure facilities. Self-contained undercounter ice machines pair a smaller maker with a built-in bin for bars, cafes, prep areas, and healthcare units that want nugget or flake ice close at hand. Head-and-bin packages combine a modular maker with a matched 310 to 580 pound bin so one order covers the full setup.

    Common Types of Air Cooled Ice Machines

    • Modular ice machine heads: Maker-only units 22, 30, or 48 inches wide that mount on a storage bin, ice dispenser, or soda dispenser. Output runs 300 to 1,965 pounds per day. This is the standard format for restaurants, hotels, and institutional kitchens that need volume and want to size the bin separately.
    • Correctional ice machine heads: Secure versions of 460 to 1,690 pound heads with stainless steel panels for prisons, detention centers, and secure healthcare wings.
    • Undercounter and self-contained ice machines: A maker and bin in one cabinet, 15 to 26 inches wide, producing 50 to 400 pounds per day with 25 to 150 pound built-in storage. Cube models fit under a bar top; undercounter nugget and flake units with 30 to 120 pound bins serve cafes, clinics, and seafood counters.
    • Head-and-bin packages: A modular head sold with its matched bin, in 310, 400, 470, and 580 pound bin sizes. Packages remove the guesswork of pairing a head to a bin from a different brand.
    • Full dice, half dice, and regular cube ice machines: The standard formats for cocktails, fountain drinks, and ice buckets. Full dice melts slowly and looks clean in a glass. Half dice fills a cup with less ice by weight, which stretches output at a soda station. Regular cube is a larger cube for bars and hotels that want a slower melt.
    • Nugget ice machines: Soft, chewable ice for fountain drinks, smoothies, and healthcare service. Nugget heads and undercounter units run 145 to 1,080 pounds per day.
    • Flake ice machines: Small dry flakes for seafood displays, produce cases, blended drinks, and healthcare. Flake heads and undercounter units produce 230 to 1,300 pounds per day.

    Buying a Commercial Air Cooled Ice Machine

    • Daily output: Size the machine to peak demand, not average. A working rule is 1.5 pounds of ice per restaurant guest, 3 pounds per bar customer, and 5 pounds per hotel room per day. Add 20 percent for summer and growth, since output ratings are measured at 70°F air and 50°F water and drop as the room gets warmer.
    • Bin capacity: A bin should hold about 75 to 80 percent of the machine's daily output so the maker can run a full cycle overnight without overflowing. Undercounter units with 25 to 35 pound bins suit light service; busy bars need the 75 to 150 pound built-in bins or a modular head on a 400 pound bin.
    • Clearance and ambient temperature: Air cooled units pull room air across the condenser and exhaust it back out, so they need open space on the vented sides and top. Keep the install location below 90°F; a hot dish room or equipment closet with no airflow cuts production and shortens compressor life.
    • Water filtration: Scale is the main cause of ice machine service calls. An inline water filter sized for the machine protects the evaporator and keeps ice clear.
    • Electrical: Undercounter units and smaller heads run on 115V. Heads rated 500 pounds per day and above typically need 208 to 230V single-phase service. Some heads and undercounter units come in 220 to 240V 50 Hz export versions for installs outside North America. Confirm the circuit before the machine arrives.
    • Refrigerant and efficiency: Newer heads and undercounter units use R290 hydrocarbon refrigerant, which lowers energy draw and meets current refrigerant regulations. ENERGY STAR listed models may qualify for utility rebates.
    • Ice shape for the menu: Cocktail bars and fine dining favor full dice. Fast casual and fountain-heavy menus get more cups per pound from half dice. Smoothie shops, healthcare, and seafood counters want nugget or flake.

    Air Cooled Ice Machine FAQs

    Air Cooled vs Water Cooled Ice Machine: Which Is Better?

    Air cooled wins for most kitchens. It costs less to buy, installs with a single water inlet and drain, and uses no water for cooling, which matters where water rates are high or water cooled condensers are restricted by code. Water cooled machines hold their rated output in rooms above 90°F and run quieter, so they fit hot, enclosed equipment rooms. If the machine will live in a normally ventilated kitchen, bar, or back room, choose air cooled.

    What Size Commercial Ice Machine Do I Need?

    Estimate peak daily use by seat or room count, then size up. A 100-seat restaurant turning tables twice uses roughly 300 pounds of ice a day, which calls for a 350 to 500 pound head. A neighborhood bar with 60 customers a night uses about 180 pounds, so a 200 to 280 pound undercounter unit covers it. A 100-room hotel needs 500 pounds or more, and hospitals, universities, and stadium concessions move into 1,000 to 2,000 pound heads on large bins. When in doubt, buy the next size up; running out of ice on a Saturday costs more than the price difference.

    How Much Does a Commercial Air Cooled Ice Machine Cost?

    Self-contained undercounter ice machines start near $1,000 and run to about $3,700 depending on output and bin size. Modular heads in the 300 to 550 pound range land between $2,000 and $4,600. Heads producing 600 to 1,000 pounds run $4,800 to $7,800, and the largest 1,200 to 1,965 pound heads cost $7,300 to $10,600. Head-and-bin packages run $2,800 to $8,000 depending on output and bin size, and specialty flake and snow ice machines reach $8,000 to $12,000. Lower purchase price, simpler installation, and no cooling water bill keep air cooled machines ahead of water cooled units on total cost.

    Do Air Cooled Ice Machines Need a Water Line or Drain?

    Yes, but only for the ice itself. Every ice machine needs a potable cold water supply and a drain for melt water and the harvest cycle. An air cooled model does not need the second water circuit and drain that a water cooled condenser requires, so plumbing stays simple and installation is usually a same-day job.

    Related Categories

    Shop by Brand

    About Westlake

    Westlake Kitchen manufactures commercial refrigeration and cooking equipment for restaurants, bars, cafés, and other foodservice operations. Its product line includes reach-in refrigerators and freezers, refrigerated prep tables, ice machines, merchandisers, ranges, griddles, and fryers. Westlake refrigeration equipment features stainless steel construction, with select models using Embraco compressors and R290 refrigerant. Many models carry ETL, NSF, or DOE certifications, addressing commercial safety, sanitation, and energy requirements. The company offers equipment configurations suited to compact workstations, high-volume kitchens, and different food preparation needs. Its designs emphasize practical storage capacity, temperature control, accessible controls, and efficient use of kitchen space.\

    Product Features

    1. Full cube ice maker and storage bin in one stacked unit for restaurants, bars, and beverage service
    2. Storage bin beneath the head with a front-opening door for scooping
    3. Digital control panel with status indication, countdown, and on-screen fault codes
    4. Adjustable ice thickness setting to match the cube to the drink
    5. Voice fault alert system that announces errors out loud
    6. One-button automatic cleaning cycle
    7. Removable air filters on both sides of the head for quick rinsing and replacement
    8. One included water filter for the supply line
    9. Air-cooled condenser with R290 refrigerant
    10. 304 stainless steel construction, with 316 stainless steel used on some parts
    11. Riveted, weld-free sheet metal frame
    12. Food grade ABS and PE materials
    13. Adjustable legs for leveling on uneven floors
    14. Cord-and-plug connection on a long factory cord

    See all from Westlake

    Specifications

    Ice TypeFull cube
    Ice Production per 24 Hours700 lb
    Production Rating Conditions70 °F air, 50 °F water
    Bin Storage Capacity440 lb
    Cubes per Harvest260
    Harvest Cycle15 to 17 min
    ConfigurationIce maker head on storage bin
    CondenserAir cooled
    RefrigerantR290
    Voltage220 V
    Frequency60 Hz
    Wattage1500 W
    PlugNEMA 6-20P
    Cord Length71 in.
    Width29.9 in.
    Depth33.9 in.
    Height68.7 in.
    Head Height22.3 in.
    Head Depth23.4 in.
    Leg Height6.2 to 7 in., adjustable
    Construction304 stainless steel, some 316 stainless parts
    FrameRiveted, weld-free
    Food Contact MaterialsFood grade ABS and PE
    ControlsDigital panel, fault codes, adjustable ice thickness
    Fault AlertOn-panel code and voice alert
    CleaningAutomatic cleaning cycle
    Air FilterRemovable, both sides
    Water Filter1 included

    Manufacturer's Warranty

      6 year

      Compressor

      2 year

      Labor

      2 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch