Skip to content

Breezaire WKL 8000 2000 Cu. Ft. Self-Contained Wine Cooling System, Sentry III+ Controls, Through-the-Wall

SKUWKL 8000 BrandBreezaire

The Breezaire WKL 8000 Wine Cooling System

The Breezaire WKL 8000 is a self-contained, through-the-wall wine cooling unit engineered for cellars up to 2000 cubic feet. It arrives fully charged with R134a refrigerant and is operational once installed in a wall opening and plugged into a standard 115V AC GFCI outlet. The WKL 8000 provides stable temperature control, maintains proper humidity, and minimizes vibration—key factors for preserving wine quality in large residential or commercial cellars.

8,000 BTU Cooling with 48°F to 63°F Adjustable Set Point

The WKL 8000 maintains cellar temperatures from 48°F to 63°F, covering the full spectrum for red, white, and mixed wine storage. The Sentry III+ controller defaults to 55°F, and the system holds relative humidity between 50% and 75%. This range prevents corks from drying out and labels from lifting, while also reducing the risk of mold on racks and cases. Consistent humidity and temperature protect both wine quality and bottle presentation. The unit delivers a steady, gentle airflow to avoid sudden temperature swings. It is designed specifically for long-term wine storage, not for rapid chilling or frequent-access service cabinets.

Sentry III+ Electronic Control System

The WKL 8000 includes the Breezaire Sentry III+ digital controller, which displays cellar temperature on a large green LED and allows set point adjustments with simple button controls—no tools needed. User settings are stored in permanent memory, so preferences remain intact after power interruptions. The automatic compressor restart delay prevents short-cycling, extending compressor life. A high-temperature alarm and automatic overheat protection safeguard wine by alerting users and shutting down the unit if temperatures exceed safe limits. The standard enclosure air sensor regulates temperature, and an optional bottle probe provides direct liquid temperature readings for more precise storage monitoring. If a sensor fails, the error display notifies the user, and manual operation is available to maintain cooling until service is performed.

Vibration Control and 69 dB-A Sound Level

The WKL 8000 uses vibration-dampening mounts throughout the cooling system to minimize movement that can disturb wine sediment and affect long-term quality. Operating at about 69 dB-A, the unit is comparable to normal conversation and quieter than typical household appliances. Because it handles the largest cooling load in the WKL Series, it will cycle more frequently in large cellars. For best results, exhaust warm air into a well-ventilated area away from main living or tasting spaces. The metal cabinet mounts flush in the wall and installs without the need for plumbing, complex wiring, or on-site refrigerant work.

About Breezaire

Breezaire is known for practical, well-engineered cooling systems built to keep wine rooms and other sensitive storage spaces stable. Since 1985, the brand has focused on steady temperature and humidity control rather than the fast drying effect of standard refrigeration. Many restaurants, clubs, and collectors rely on Breezaire because the units protect cork integrity and maintain consistent conditions over long periods. The company also supports every system it has produced, and current models match earlier footprints for straightforward replacement. This steady approach to design and service has made Breezaire a dependable choice for facilities that need predictable, low-impact climate control.

Features & Benefits

  1. Self-contained, through-the-wall wine cellar cooling system for enclosures up to 2000 cu. ft.
  2. Largest-capacity unit in the Breezaire WKL Series
  3. 8,000 BTU thermal capacity
  4. Selectable cellar temperature range of approximately 48°F to 63°F
  5. Reduces excess relative humidity and maintains the 50% to 75% range
  6. Gentle stream of cool air protects wines from abrupt temperature changes
  7. Sentry III+ digital electronic controller with large green LED display
  8. Factory default set point of 55°F with user-adjustable bandwidth of ±1°F to ±5°F
  9. Tool-free set point adjustment with continuous cabinet temperature display
  10. User-adjustable high-temperature alarm (62°F factory default)
  11. Automatic over-heat protection shuts the unit down if cellar temperature approaches 75°F
  12. Automatic compressor restart delay after power interruption or thermostat adjustment
  13. Permanent memory retention of user settings during power outages
  14. Automatic sensor error detection with "Er" display and emergency manual operation
  15. Controls temperature via enclosure (cellar) air sensor or optional bottle probe
  16. Evaporator fan continues for 45 seconds after compressor shutoff to harvest remaining cooling
  17. Vibration-dampening mounts throughout the cooling system
  18. Hand-assembled and tested in U.S. production facilities
  19. Approximately 69 dB-A sound level
  20. Factory pre-charged with R134a refrigerant, ready to use once mounted and plugged in
  21. Attractive metal cabinet designed for flush wall mounting
  22. Compatible with optional Breezaire bottle probe accessory

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$4,025.00
  • Self-contained, through-the-wall wine cellar cooling system for enclosures up to 2000 cu. ft.
  • Largest-capacity unit in the Breezaire WKL Series
  • 8,000 BTU thermal capacity
  • Selectable cellar temperature range of approximately 48°F to 63°F
  • Reduces excess relative humidity and maintains the 50% to 75% range
  • See full feature list

    The Breezaire WKL 8000 Wine Cooling System

    The Breezaire WKL 8000 is a self-contained, through-the-wall wine cooling unit engineered for cellars up to 2000 cubic feet. It arrives fully charged with R134a refrigerant and is operational once installed in a wall opening and plugged into a standard 115V AC GFCI outlet. The WKL 8000 provides stable temperature control, maintains proper humidity, and minimizes vibration—key factors for preserving wine quality in large residential or commercial cellars.

    8,000 BTU Cooling with 48°F to 63°F Adjustable Set Point

    The WKL 8000 maintains cellar temperatures from 48°F to 63°F, covering the full spectrum for red, white, and mixed wine storage. The Sentry III+ controller defaults to 55°F, and the system holds relative humidity between 50% and 75%. This range prevents corks from drying out and labels from lifting, while also reducing the risk of mold on racks and cases. Consistent humidity and temperature protect both wine quality and bottle presentation. The unit delivers a steady, gentle airflow to avoid sudden temperature swings. It is designed specifically for long-term wine storage, not for rapid chilling or frequent-access service cabinets.

    Sentry III+ Electronic Control System

    The WKL 8000 includes the Breezaire Sentry III+ digital controller, which displays cellar temperature on a large green LED and allows set point adjustments with simple button controls—no tools needed. User settings are stored in permanent memory, so preferences remain intact after power interruptions. The automatic compressor restart delay prevents short-cycling, extending compressor life. A high-temperature alarm and automatic overheat protection safeguard wine by alerting users and shutting down the unit if temperatures exceed safe limits. The standard enclosure air sensor regulates temperature, and an optional bottle probe provides direct liquid temperature readings for more precise storage monitoring. If a sensor fails, the error display notifies the user, and manual operation is available to maintain cooling until service is performed.

    Vibration Control and 69 dB-A Sound Level

    The WKL 8000 uses vibration-dampening mounts throughout the cooling system to minimize movement that can disturb wine sediment and affect long-term quality. Operating at about 69 dB-A, the unit is comparable to normal conversation and quieter than typical household appliances. Because it handles the largest cooling load in the WKL Series, it will cycle more frequently in large cellars. For best results, exhaust warm air into a well-ventilated area away from main living or tasting spaces. The metal cabinet mounts flush in the wall and installs without the need for plumbing, complex wiring, or on-site refrigerant work.

    About Breezaire

    Breezaire is known for practical, well-engineered cooling systems built to keep wine rooms and other sensitive storage spaces stable. Since 1985, the brand has focused on steady temperature and humidity control rather than the fast drying effect of standard refrigeration. Many restaurants, clubs, and collectors rely on Breezaire because the units protect cork integrity and maintain consistent conditions over long periods. The company also supports every system it has produced, and current models match earlier footprints for straightforward replacement. This steady approach to design and service has made Breezaire a dependable choice for facilities that need predictable, low-impact climate control.

    Features & Benefits

    1. Self-contained, through-the-wall wine cellar cooling system for enclosures up to 2000 cu. ft.
    2. Largest-capacity unit in the Breezaire WKL Series
    3. 8,000 BTU thermal capacity
    4. Selectable cellar temperature range of approximately 48°F to 63°F
    5. Reduces excess relative humidity and maintains the 50% to 75% range
    6. Gentle stream of cool air protects wines from abrupt temperature changes
    7. Sentry III+ digital electronic controller with large green LED display
    8. Factory default set point of 55°F with user-adjustable bandwidth of ±1°F to ±5°F
    9. Tool-free set point adjustment with continuous cabinet temperature display
    10. User-adjustable high-temperature alarm (62°F factory default)
    11. Automatic over-heat protection shuts the unit down if cellar temperature approaches 75°F
    12. Automatic compressor restart delay after power interruption or thermostat adjustment
    13. Permanent memory retention of user settings during power outages
    14. Automatic sensor error detection with "Er" display and emergency manual operation
    15. Controls temperature via enclosure (cellar) air sensor or optional bottle probe
    16. Evaporator fan continues for 45 seconds after compressor shutoff to harvest remaining cooling
    17. Vibration-dampening mounts throughout the cooling system
    18. Hand-assembled and tested in U.S. production facilities
    19. Approximately 69 dB-A sound level
    20. Factory pre-charged with R134a refrigerant, ready to use once mounted and plugged in
    21. Attractive metal cabinet designed for flush wall mounting
    22. Compatible with optional Breezaire bottle probe accessory

    See all from Breezaire

    Specifications

    Maximum Enclosure Capacity2000 cu. ft.
    Thermal Capacity8,000 BTU
    Temperature Set Point RangeApproximately 48°F to 63°F
    Factory Default Set Point55°F
    Factory Default Bandwidth±3°F (user-adjustable ±1°F to ±5°F)
    Factory Default Alarm Setting62°F (user-adjustable)
    Humidity Range Maintained50% to 75% RH
    Control SystemSentry III+ digital electronic
    DisplayGreen LED, continuous cabinet temperature readout, °F or °C selectable
    Temperature SensingEnclosure air sensor (standard) or optional bottle probe
    Compressor Restart DelayAutomatic delay after power interruption or set-point adjustment
    Over-Heat ProtectionAutomatic shutdown if cellar temperature approaches 75°F
    Memory RetentionPermanent retention of user settings during power outages
    Evaporator Fan OperationAuto (factory default) or always-on; continues 45 sec after compressor shutoff
    Sensor Error DetectionAutomatic, with "Er" display and emergency manual operation
    Vibration ControlDampening mounts throughout the cooling system
    RefrigerantR134a (factory pre-charged)
    Installation TypeThrough-the-wall, self-contained, flush mount
    CabinetMetal (BLACK upgrade available as special order with aluminum base)
    Sound LevelApproximately 69 dB-A
    DrainPull-down condensate drain tube in the base on the cold side (optional Rear Drain Fitting available)
    Minimum Warm Air Exhaust Clearance3 feet, unobstructed
    Dimensions16.25" W x 22.00" H x 22.25" D
    Weight101 lb.
    Electrical115V, 60Hz, 10 Amps
    Electrical RequirementsGrounded GFCI outlet on its own circuit; appliance-grade surge protector recommended
    Country of ManufactureUSA (hand-assembled)
    AssemblyHand-assembled and tested
    Optional Factory ModificationsCold Air Out the Top (CAT), Hot Air Out the Top (HAU), Power Cord Out the Rear (COB), Rear Drain Fitting (RDF)
    Compatible AccessoriesBreezaire bottle probe

    Manufacturer's Warranty

    • 5 Year

      Parts

    • 1 Year

      Labor

    Certifications & Approvals

    • USA
      Made in USA

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're exited to serve you next! 

    The Breezaire WKL 8000 Wine Cooling System

    About Breezaire

    Breezaire is known for practical, well-engineered cooling systems built to keep wine rooms and other sensitive storage spaces stable. Since 1985, the brand has focused on steady temperature and humidity control rather than the fast drying effect of standard refrigeration. Many restaurants, clubs, and collectors rely on Breezaire because the units protect cork integrity and maintain consistent conditions over long periods. The company also supports every system it has produced, and current models match earlier footprints for straightforward replacement. This steady approach to design and service has made Breezaire a dependable choice for facilities that need predictable, low-impact climate control.

    Product Features

    1. Self-contained, through-the-wall wine cellar cooling system for enclosures up to 2000 cu. ft.
    2. Largest-capacity unit in the Breezaire WKL Series
    3. 8,000 BTU thermal capacity
    4. Selectable cellar temperature range of approximately 48°F to 63°F
    5. Reduces excess relative humidity and maintains the 50% to 75% range
    6. Gentle stream of cool air protects wines from abrupt temperature changes
    7. Sentry III+ digital electronic controller with large green LED display
    8. Factory default set point of 55°F with user-adjustable bandwidth of ±1°F to ±5°F
    9. Tool-free set point adjustment with continuous cabinet temperature display
    10. User-adjustable high-temperature alarm (62°F factory default)
    11. Automatic over-heat protection shuts the unit down if cellar temperature approaches 75°F
    12. Automatic compressor restart delay after power interruption or thermostat adjustment
    13. Permanent memory retention of user settings during power outages
    14. Automatic sensor error detection with "Er" display and emergency manual operation
    15. Controls temperature via enclosure (cellar) air sensor or optional bottle probe
    16. Evaporator fan continues for 45 seconds after compressor shutoff to harvest remaining cooling
    17. Vibration-dampening mounts throughout the cooling system
    18. Hand-assembled and tested in U.S. production facilities
    19. Approximately 69 dB-A sound level
    20. Factory pre-charged with R134a refrigerant, ready to use once mounted and plugged in
    21. Attractive metal cabinet designed for flush wall mounting
    22. Compatible with optional Breezaire bottle probe accessory

    See all from Breezaire

    Specifications

    Maximum Enclosure Capacity2000 cu. ft.
    Thermal Capacity8,000 BTU
    Temperature Set Point RangeApproximately 48°F to 63°F
    Factory Default Set Point55°F
    Factory Default Bandwidth±3°F (user-adjustable ±1°F to ±5°F)
    Factory Default Alarm Setting62°F (user-adjustable)
    Humidity Range Maintained50% to 75% RH
    Control SystemSentry III+ digital electronic
    DisplayGreen LED, continuous cabinet temperature readout, °F or °C selectable
    Temperature SensingEnclosure air sensor (standard) or optional bottle probe
    Compressor Restart DelayAutomatic delay after power interruption or set-point adjustment
    Over-Heat ProtectionAutomatic shutdown if cellar temperature approaches 75°F
    Memory RetentionPermanent retention of user settings during power outages
    Evaporator Fan OperationAuto (factory default) or always-on; continues 45 sec after compressor shutoff
    Sensor Error DetectionAutomatic, with "Er" display and emergency manual operation
    Vibration ControlDampening mounts throughout the cooling system
    RefrigerantR134a (factory pre-charged)
    Installation TypeThrough-the-wall, self-contained, flush mount
    CabinetMetal (BLACK upgrade available as special order with aluminum base)
    Sound LevelApproximately 69 dB-A
    DrainPull-down condensate drain tube in the base on the cold side (optional Rear Drain Fitting available)
    Minimum Warm Air Exhaust Clearance3 feet, unobstructed
    Dimensions16.25" W x 22.00" H x 22.25" D
    Weight101 lb.
    Electrical115V, 60Hz, 10 Amps
    Electrical RequirementsGrounded GFCI outlet on its own circuit; appliance-grade surge protector recommended
    Country of ManufactureUSA (hand-assembled)
    AssemblyHand-assembled and tested
    Optional Factory ModificationsCold Air Out the Top (CAT), Hot Air Out the Top (HAU), Power Cord Out the Rear (COB), Rear Drain Fitting (RDF)
    Compatible AccessoriesBreezaire bottle probe

    Manufacturer's Warranty

      5 year

      Parts

      1 year

      Labor

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch