The Prepline PFW-8-8 Sink Faucet
The Prepline PFW-8-8 is a wall mounted commercial sink faucet with an 8 inch swing spout and 8 inch centers, the workhorse pattern for compartment sinks, prep sinks, and utility sinks across commercial kitchens. Mounting on the wall keeps the faucet body up out of the sink deck, so the area around the bowls stays clear for stacked pans and the faucet itself stays out of the splash zone that corrodes deck mounted hardware from below.
Chrome-Plated Brass Body
The main body is brass with a chrome plated finish and zinc alloy handles. Brass threads seal cleanly and hold up to years of on-off cycling without cracking, which is why it remains the standard for commercial plumbing. The chrome plating resists scratches and fingerprints and wipes clean with a sanitizer cloth, keeping the faucet presentable on an open dish line where dull, spotted fixtures show every shortcut.
8 Inch Swing Spout
The 8 inch spout swings the full width of its reach, so one faucet serves neighboring compartments of a multi-bowl sink: swing left to fill the wash bay, swing right to rinse. Spout reach determines where the water column lands, and the 8 inch length is matched to bowls where the stream should land mid-bowl rather than against the near wall, which is what causes chronic splash on the floor in front of the sink.
8 Inch Centers for Standard Splash Mounts
Supply connections are 1/2 inch NPS on 8 inch centers, the standard spacing punched into the backsplashes of commercial compartment sinks. If you are replacing a tired faucet on an existing sink, the new body lands on the same two holes with no adapter plates, and dual handles give separate hot and cold control for mixing wash and rinse temperatures.
Built for Daily Commercial Use
Wear resisting internals and leakproof seal construction are what separate a commercial faucet from the residential hardware that fails within months on a dish line running all day. The corrosion resistant finish handles constant humidity, and the surface treatment cleans quickly at close. The faucet ships in a compact 12.8 by 4.8 by 2 inch box and installs with common plumbing tools.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Wall mount faucet for compartment sinks, prep sinks, and utility sinks
-
Chrome-plated brass body with zinc alloy handles built for years of cycling
-
8 inch swing spout serves neighboring bowls of a multi-compartment sink
-
Standard 8 inch centers land on existing splash mount holes without adapters
-
Dual handles mix hot and cold for wash and rinse temperatures
-
Wall mounting keeps the sink deck clear and the body out of the splash zone
-
Wear resisting, leakproof construction prevents the chronic drip
-
Chrome finish resists scratches and fingerprints and wipes clean fast
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Wall mount faucet for compartment sinks, prep sinks, and utility sinks
Chrome-plated brass body with zinc alloy handles built for years of cycling
8 inch swing spout serves neighboring bowls of a multi-compartment sink
Standard 8 inch centers land on existing splash mount holes without adapters
Dual handles mix hot and cold for wash and rinse temperatures
The Prepline PFW-8-8 Sink Faucet
The Prepline PFW-8-8 is a wall mounted commercial sink faucet with an 8 inch swing spout and 8 inch centers, the workhorse pattern for compartment sinks, prep sinks, and utility sinks across commercial kitchens. Mounting on the wall keeps the faucet body up out of the sink deck, so the area around the bowls stays clear for stacked pans and the faucet itself stays out of the splash zone that corrodes deck mounted hardware from below.
Chrome-Plated Brass Body
The main body is brass with a chrome plated finish and zinc alloy handles. Brass threads seal cleanly and hold up to years of on-off cycling without cracking, which is why it remains the standard for commercial plumbing. The chrome plating resists scratches and fingerprints and wipes clean with a sanitizer cloth, keeping the faucet presentable on an open dish line where dull, spotted fixtures show every shortcut.
8 Inch Swing Spout
The 8 inch spout swings the full width of its reach, so one faucet serves neighboring compartments of a multi-bowl sink: swing left to fill the wash bay, swing right to rinse. Spout reach determines where the water column lands, and the 8 inch length is matched to bowls where the stream should land mid-bowl rather than against the near wall, which is what causes chronic splash on the floor in front of the sink.
8 Inch Centers for Standard Splash Mounts
Supply connections are 1/2 inch NPS on 8 inch centers, the standard spacing punched into the backsplashes of commercial compartment sinks. If you are replacing a tired faucet on an existing sink, the new body lands on the same two holes with no adapter plates, and dual handles give separate hot and cold control for mixing wash and rinse temperatures.
Built for Daily Commercial Use
Wear resisting internals and leakproof seal construction are what separate a commercial faucet from the residential hardware that fails within months on a dish line running all day. The corrosion resistant finish handles constant humidity, and the surface treatment cleans quickly at close. The faucet ships in a compact 12.8 by 4.8 by 2 inch box and installs with common plumbing tools.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Wall mount faucet for compartment sinks, prep sinks, and utility sinks
-
Chrome-plated brass body with zinc alloy handles built for years of cycling
-
8 inch swing spout serves neighboring bowls of a multi-compartment sink
-
Standard 8 inch centers land on existing splash mount holes without adapters
-
Dual handles mix hot and cold for wash and rinse temperatures
-
Wall mounting keeps the sink deck clear and the body out of the splash zone
-
Wear resisting, leakproof construction prevents the chronic drip
-
Chrome finish resists scratches and fingerprints and wipes clean fast
Resources & Downloads
See all from Prepline
Specifications
| Mount | Wall |
| Spout Type | Swing |
| Spout Reach | 8" |
| Faucet Centers | 8" |
| NPS Connection | 1/2" |
| Body | Chrome-plated brass |
| Handles | Zinc alloy |
| Nozzle Type | Swing |
| Dimension A | 2 5/16" |
| Dimension B | 4 9/16" |
| Unit Weight | 3 lb. |
| Packaging Dimensions | 12.8" x 4.8" x 2" |
Certifications & Approvals
-
NSF Approved
Wall mount faucet for compartment sinks, prep sinks, and utility sinks