Cookline CTF3 Commercial 35 lb Natural Gas Stainless Steel Countertop Fryer

Cookline manufactures commercial cooking equipment designed to meet the daily demands of professional kitchens. The product range includes gas and electric ranges, griddles, fryers, charbroilers, and stock pot ranges—all built with stainless steel construction, precise temperature controls, and service-friendly components. Cookline equipment is used in restaurants, diners, and high-volume operations that require consistent heat and reliable performance across shifts. Each unit is engineered for efficiency and compliance with commercial safety standards, including ETL and NSF listings. With solid construction and parts support, Cookline offers dependable options for kitchens that need performance without added complexity.

Commercial countertop fryers give you frying power without taking up floor space. They sit on a prep counter and come in gas, electric, or propane. Use a small unit as a backup or go with a double tank for higher volume. You get flexibility and solid output in a compact footprint.

Common Types and Configurations

• Electric countertop fryers: Easy to install and give you precise temperature control. Work well in kitchens without a gas line or where you need steady temps.
• Gas countertop fryers: Faster heat recovery than electric. A good fit for kitchens already running natural gas.
• Propane countertop fryers: Run on bottled gas. Common in food trucks, outdoor catering, or anywhere you don't have a gas line.
• Double tank countertop fryers: Two vats in one unit. Fry different foods at once without mixing flavors.
• Small commercial countertop fryers: Single vat units for lower volume or as a backup station.

What to Look at Before You Buy

• Oil capacity: Runs from 10 to 30 pounds. Match the size to your menu and peak times.
• Gas or electric: Gas units recover heat faster. Electric models are easier to install and hold temps steady. Use propane if you don't have a gas line.
• Voltage requirements: Most electric countertop fryers need 220V or 240V. Some small units run on 120V. Check your kitchen's power before you buy.
• Number of vats: Single vat fryers are fine for simple menus. Double tank units let you fry different foods at the same time without cross-contamination.
• Recovery time: Higher wattage or BTU means faster recovery between batches. This matters during busy service when the fryer is always on.
• Controls: Manual controls are simple and reliable. Digital controls let you set cook times for consistency across staff.
• Installation: Gas units need a gas line. Electric units need the right voltage and amperage. Check your setup before you order.

Frequently Asked Questions

What is the difference between a countertop fryer and a floor fryer?

Countertop fryers are compact, hold less oil, and sit on a prep counter. They're good for lower volume or as a backup. Floor fryers are bigger, hold more oil, and are made for high-volume kitchens where frying never stops. If frying is a main part of your menu, go with a floor fryer for more capacity and faster recovery.

Can a commercial countertop fryer run on 120V?

Some small countertop fryers run on 120V, but most commercial models need 220V or 240V for proper output and recovery. A 120V unit is only for very low volume and won't keep up during busy times. For steady performance, choose a 220V model and check your kitchen's power before you buy.

What should I look for when buying a commercial countertop fryer?

Start with fuel type and voltage. Then look at oil capacity and decide if you need a single or double tank. Check recovery time, controls, and installation before you order. The right fryer depends on your menu, volume, and power supply.

Related Categories

• Commercial Fryers
• Gas Fryers
• Electric Fryers
• Cooking Equipment

Shop by Brand

• AMPTO
• Atosa
• Cookline
• Skyfood

Commercial gas fryers are essential in most professional kitchens. They heat quickly, recover fast between batches, and usually cost less to run than electric models. Choose countertop or floor models based on your menu and volume. For a small cafe, a compact countertop fryer may be all you need. High-volume restaurants should stick with floor models or industrial gas fryers that can handle nonstop use. Check if your kitchen uses natural gas or propane before you order.

Common Types and Configurations

• Gas countertop fryers: Compact units that sit on a prep counter. Good for smaller operations or as a supplemental fryer station.
• Gas floor fryers: Full size units with higher oil capacity and output. Standard in high-volume restaurant kitchens.
• Commercial propane deep fryers: Run on propane instead of natural gas. Common in food trucks, outdoor catering, and locations without a natural gas line.
• Small commercial gas fryers: Compact countertop units for lower volume operations or tight kitchen spaces.
• Double vat fryers: Two separate vats allow you to fry different items simultaneously without flavor transfer.

What to Look at Before You Buy

• Oil capacity: Measured in pounds. Countertop fryers hold 15 to 30 pounds. Floor models range from 40 to 80 pounds or more. Choose a size that matches your volume.
• BTU output: Higher BTU means faster heat recovery. This matters in high-volume kitchens where the fryer runs nonstop during service.
• Gas type: Most fryers use natural gas. If you need a commercial gas deep fryer that runs on propane, check that LP conversion is available before you order.
• Number of vats: Single vat fryers are fine for simple menus. Double vats let you fry different items at once without cross-contamination.
• Filtration system: Some fryers have built-in oil filtration. This extends oil life and cuts operating costs.
• Controls: Manual controls are simple and reliable. Digital controls let you program cook times for consistency across staff.
• Installation: Gas fryers need a licensed installer, proper ventilation, and a commercial hood. Check your gas line size before you order.

Frequently Asked Questions

What size commercial gas fryer do I need for my restaurant?

It depends on your menu and volume. Small gas fryers and countertop units work for low volume or as a backup. If frying is a main part of your menu, go with a floor model or industrial gas fryer. Plan for 1 to 1.5 pounds of oil capacity for every pound of food you fry per hour. If frying is central to your kitchen, size up to avoid bottlenecks.

What is the difference between a countertop and floor gas fryer?

Countertop fryers are compact, hold less oil, and fit in tight spaces or low-volume kitchens. Floor fryers are larger, hold more oil, and are built for nonstop, high-volume frying. If your fryer runs all service, choose a floor model for better output and faster recovery.

How many pounds of oil does a commercial gas fryer hold?

Countertop fryers hold 15 to 30 pounds of oil. Standard floor models hold 40 to 50 pounds. High-capacity floor fryers can hold 80 pounds or more. More oil keeps temperatures stable during heavy use and cuts recovery time.

Related Categories

• Commercial Fryers
• Electric Fryers
• Countertop Fryers
• Cooking Equipment

Shop by Brand

• AMPTO
• Atosa
• Cookline
• General
• Migali
• Standard Range
• Venancio