The Prepline PHS12 Hand sink
The Prepline PHS12 is a 12 inch wall mount hand sink that puts a dedicated handwashing station wherever your crew actually needs one. Health inspectors want a hand sink within easy reach of every prep and service area, and a compact wall hung unit like this one solves the problem without giving up floor space. At 12 inches across and 16 inches front to back, it tucks between stations, beside a walk-in door, or at the end of a cook line where a floor standing sink would never fit.
18 Gauge 304 Stainless Steel Body
The whole sink is formed from 18 gauge type 304 stainless steel, the same food grade alloy used on prep tables and compartment sinks. It shrugs off the constant splash and soap of a busy shift and will not rust out the way lighter coated steel fixtures do. The body is leakproof for long service life, so you are not chasing drips down the wall a year after installation.
Drawn Bowl with Burr Free Edges
The 9 by 9 inch bowl is drawn 5 inches deep, enough to keep wash water and overspray contained while a line cook scrubs up between tasks. Every edge on the sink is finished burr free, so nobody slices a knuckle or snags a sleeve reaching across it. A scratch and fingerprint resistant surface treatment keeps the front apron looking clean even in an open kitchen where guests can see it.
Gooseneck Faucet and Drain Basket Included
Unlike faucet-ready sinks that leave you sourcing hardware separately, the PHS12 arrives with its swing gooseneck faucet and a 1.5 inch drain basket in the box. The tall gooseneck spout leaves generous clearance for hands and forearms, and the basket catches food scraps and paper towel bits before they reach the plumbing. Plumb the supply lines, hang the sink, and the station is ready the same day.
Wall Mount Installation
Hanging the sink on the wall keeps the floor beneath it open for mopping, which matters in the tight corners where hand sinks usually live. The 13 inch tall back panel carries the faucet deck and gives splashes a stainless surface to hit instead of painted drywall. For a station that also needs side protection next to food prep, the same sink is offered with side splashes as the PHS12-SP.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Compact wall mount hand sink for prep lines, service stations, and bar corners
-
High grade stainless steel body resists corrosion through years of daily washups
-
Heavy duty, wear-resisting construction built for constant use
-
Leakproof body keeps water off the wall and floor below
-
Every edge finished burr free so hands and sleeves stay safe
-
Scratch and fingerprint resistant surface treatment keeps the apron presentable
-
Swing gooseneck faucet arrives in the box, no separate faucet order needed
-
Drain basket catches scraps before they reach the plumbing
-
Wall hung design keeps the floor clear for nightly mopping
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Compact wall mount hand sink for prep lines, service stations, and bar corners
High grade stainless steel body resists corrosion through years of daily washups
Heavy duty, wear-resisting construction built for constant use
Leakproof body keeps water off the wall and floor below
Every edge finished burr free so hands and sleeves stay safe
The Prepline PHS12 Hand sink
The Prepline PHS12 is a 12 inch wall mount hand sink that puts a dedicated handwashing station wherever your crew actually needs one. Health inspectors want a hand sink within easy reach of every prep and service area, and a compact wall hung unit like this one solves the problem without giving up floor space. At 12 inches across and 16 inches front to back, it tucks between stations, beside a walk-in door, or at the end of a cook line where a floor standing sink would never fit.
18 Gauge 304 Stainless Steel Body
The whole sink is formed from 18 gauge type 304 stainless steel, the same food grade alloy used on prep tables and compartment sinks. It shrugs off the constant splash and soap of a busy shift and will not rust out the way lighter coated steel fixtures do. The body is leakproof for long service life, so you are not chasing drips down the wall a year after installation.
Drawn Bowl with Burr Free Edges
The 9 by 9 inch bowl is drawn 5 inches deep, enough to keep wash water and overspray contained while a line cook scrubs up between tasks. Every edge on the sink is finished burr free, so nobody slices a knuckle or snags a sleeve reaching across it. A scratch and fingerprint resistant surface treatment keeps the front apron looking clean even in an open kitchen where guests can see it.
Gooseneck Faucet and Drain Basket Included
Unlike faucet-ready sinks that leave you sourcing hardware separately, the PHS12 arrives with its swing gooseneck faucet and a 1.5 inch drain basket in the box. The tall gooseneck spout leaves generous clearance for hands and forearms, and the basket catches food scraps and paper towel bits before they reach the plumbing. Plumb the supply lines, hang the sink, and the station is ready the same day.
Wall Mount Installation
Hanging the sink on the wall keeps the floor beneath it open for mopping, which matters in the tight corners where hand sinks usually live. The 13 inch tall back panel carries the faucet deck and gives splashes a stainless surface to hit instead of painted drywall. For a station that also needs side protection next to food prep, the same sink is offered with side splashes as the PHS12-SP.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Compact wall mount hand sink for prep lines, service stations, and bar corners
-
High grade stainless steel body resists corrosion through years of daily washups
-
Heavy duty, wear-resisting construction built for constant use
-
Leakproof body keeps water off the wall and floor below
-
Every edge finished burr free so hands and sleeves stay safe
-
Scratch and fingerprint resistant surface treatment keeps the apron presentable
-
Swing gooseneck faucet arrives in the box, no separate faucet order needed
-
Drain basket catches scraps before they reach the plumbing
-
Wall hung design keeps the floor clear for nightly mopping
Resources & Downloads
See all from Prepline
Specifications
| Overall Dimensions | 12"L x 16"D x 13"H |
| Bowl Dimensions | 9"L x 9"W x 5"D |
| Material | 304 Stainless Steel |
| Gauge | 18 |
| Faucet | Gooseneck, included |
| Drain Basket | 1.5", included |
| Side Splash | Not included |
| Mounting | Wall mount |
| Edge Finish | Burr free |
| Surface Treatment | Scratch and fingerprint resistant |
Certifications & Approvals
-
NSF Approved
Compact wall mount hand sink for prep lines, service stations, and bar corners