The Hydra-Kool KGL-RM-60-S Open Air Merchandiser
The Hydra-Kool KGL-RM-60-S is a 61-inch self-contained low profile open-front grab-and-go merchandiser with 19.85 cubic feet of front display capacity, locking rear-loading doors, and a key-operated manual pull-down shutter. At five feet wide, this is the larger of the two KGL-RM models, providing enough shelf space for a full rotation of grab-and-go beverages, sandwiches, salads, and snack items while allowing staff to load from the back. The case holds 38°F to 40°F on 115V hard-wired power at 25 amps and features a silver PVC coated steel front panel with a blue decal.
Front and Rear Loading with Locking Back Doors and Manual Pull-Down Shutter
Unlike standard open merchandisers that only load from the front, the KGL-RM gives you locking back doors for rear loading. Staff can restock from behind the counter without reaching through the customer-facing front, which keeps the display looking organized during busy hours and avoids blocking customer access. A key-operated manual pull-down shutter covers the open front when the store closes, holding cold air inside and securing product overnight. The shutter rolls up and locks out of the way during operating hours, keeping the open-front presentation clean and uncluttered.
Forced Air Refrigeration with Digital Controller and Slide-Out Condensing Unit
Forced air refrigeration circulates cold air evenly across the shelves, holding product between 38°F and 40°F from front to back. A digital controller manages temperature and defrost cycles automatically, so you do not have to babysit the case during a shift. The self-contained condensing unit slides out from the base for service, giving technicians direct access to coils and refrigerant connections without pulling the case away from the wall. A removable condensate evaporating pan collects moisture and lifts out for cleaning. The system uses R404a refrigerant and CFC-free injected foam insulation.
LED Canopy and Under-Shelf Lighting with Adjustable Tiltable Shelves
LED strips in the canopy and under each shelf illuminate product from above and below, keeping labels readable and colors true across the full depth of the case. The low profile design means customers see your product at a natural eye level, and the LED lighting makes sure nothing sits in shadow near the back of the shelf. Height-adjustable shelves can be tilted forward to angle items toward the customer, and product stops on every shelf prevent containers from sliding off the edge. This is especially useful for grab-and-go items like bottled drinks and sandwich containers that can shift when customers reach in.
The KGL-RM-60-S measures 60.6" wide x 36" deep x 65" high and weighs 510 lbs. The exterior front panel is silver colored PVC coated steel with a blue decal, the interior is PVC coated steel in gray, and the end panels are foamed polystyrene in black with a black steel kick plate. Hard-wired (no plug). Optional upgrades include stainless steel interior and exterior panels, additional shelves, price tag molding, product dividers, and a KGL-RM caster kit. Stainless steel adjustable legs (5-1/8" to 7-5/8") are also available.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Ideal for convenience stores, delis, cafeterias, and grocery grab-and-go sections displaying cold beverages, sandwiches, salads, and packaged snacks with behind-counter restocking
-
19.85 cu. ft. front display capacity
-
Temperature range: 38°F to 40°F
-
Low profile design (65" tall)
-
Open front for quick customer self-service
-
Front and rear loading capability
-
Locking back doors for rear restocking
-
Key-operated manual pull-down shutter for overnight closure
-
Forced air refrigeration, self-contained
-
Compressor: 3/4 HP, 16 FLA
-
R404a refrigerant
-
Height-adjustable shelves with tilt capability
-
Product stops on all shelves
-
LED lighting in canopy and under shelves
-
Digital temperature and defrost controller
-
Removable condensate evaporating pan
-
Slide-out condensing unit for service access
-
Tempered side glass panels
-
Silver colored PVC coated steel front panel with blue decal
-
PVC coated steel gray interior
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Levelling feet included
-
Hard-wired (no plug)
-
Total amperage: 25 A
-
Overall dimensions: 60.6" W x 36" D x 65" H
-
Net weight: 510 lbs
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Hydra-Kool KGL-RM-60-S Open Air Merchandiser
The Hydra-Kool KGL-RM-60-S is a 61-inch self-contained low profile open-front grab-and-go merchandiser with 19.85 cubic feet of front display capacity, locking rear-loading doors, and a key-operated manual pull-down shutter. At five feet wide, this is the larger of the two KGL-RM models, providing enough shelf space for a full rotation of grab-and-go beverages, sandwiches, salads, and snack items while allowing staff to load from the back. The case holds 38°F to 40°F on 115V hard-wired power at 25 amps and features a silver PVC coated steel front panel with a blue decal.
Front and Rear Loading with Locking Back Doors and Manual Pull-Down Shutter
Unlike standard open merchandisers that only load from the front, the KGL-RM gives you locking back doors for rear loading. Staff can restock from behind the counter without reaching through the customer-facing front, which keeps the display looking organized during busy hours and avoids blocking customer access. A key-operated manual pull-down shutter covers the open front when the store closes, holding cold air inside and securing product overnight. The shutter rolls up and locks out of the way during operating hours, keeping the open-front presentation clean and uncluttered.
Forced Air Refrigeration with Digital Controller and Slide-Out Condensing Unit
Forced air refrigeration circulates cold air evenly across the shelves, holding product between 38°F and 40°F from front to back. A digital controller manages temperature and defrost cycles automatically, so you do not have to babysit the case during a shift. The self-contained condensing unit slides out from the base for service, giving technicians direct access to coils and refrigerant connections without pulling the case away from the wall. A removable condensate evaporating pan collects moisture and lifts out for cleaning. The system uses R404a refrigerant and CFC-free injected foam insulation.
LED Canopy and Under-Shelf Lighting with Adjustable Tiltable Shelves
LED strips in the canopy and under each shelf illuminate product from above and below, keeping labels readable and colors true across the full depth of the case. The low profile design means customers see your product at a natural eye level, and the LED lighting makes sure nothing sits in shadow near the back of the shelf. Height-adjustable shelves can be tilted forward to angle items toward the customer, and product stops on every shelf prevent containers from sliding off the edge. This is especially useful for grab-and-go items like bottled drinks and sandwich containers that can shift when customers reach in.
The KGL-RM-60-S measures 60.6" wide x 36" deep x 65" high and weighs 510 lbs. The exterior front panel is silver colored PVC coated steel with a blue decal, the interior is PVC coated steel in gray, and the end panels are foamed polystyrene in black with a black steel kick plate. Hard-wired (no plug). Optional upgrades include stainless steel interior and exterior panels, additional shelves, price tag molding, product dividers, and a KGL-RM caster kit. Stainless steel adjustable legs (5-1/8" to 7-5/8") are also available.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Ideal for convenience stores, delis, cafeterias, and grocery grab-and-go sections displaying cold beverages, sandwiches, salads, and packaged snacks with behind-counter restocking
-
19.85 cu. ft. front display capacity
-
Temperature range: 38°F to 40°F
-
Low profile design (65" tall)
-
Open front for quick customer self-service
-
Front and rear loading capability
-
Locking back doors for rear restocking
-
Key-operated manual pull-down shutter for overnight closure
-
Forced air refrigeration, self-contained
-
Compressor: 3/4 HP, 16 FLA
-
R404a refrigerant
-
Height-adjustable shelves with tilt capability
-
Product stops on all shelves
-
LED lighting in canopy and under shelves
-
Digital temperature and defrost controller
-
Removable condensate evaporating pan
-
Slide-out condensing unit for service access
-
Tempered side glass panels
-
Silver colored PVC coated steel front panel with blue decal
-
PVC coated steel gray interior
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Levelling feet included
-
Hard-wired (no plug)
-
Total amperage: 25 A
-
Overall dimensions: 60.6" W x 36" D x 65" H
-
Net weight: 510 lbs
Resources & Downloads
See all from Hydra-Kool
Specifications
| Front Display Capacity | 19.85 cu. ft. |
| Temperature Range | 38°F to 40°F |
| Cooling System | Forced Air, Self-Contained |
| Refrigerant | R404a |
| Compressor HP | 3/4 |
| Compressor FLA | 16 A |
| Lights / Fans / Heaters | 3.45 A |
| Evaporator Pan | 6.7 A |
| Total Amperage | 25 A |
| Voltage | 115V / 60Hz / 1Ph |
| Connection | Hard-wired |
| Front | Open with key-operated manual pull-down shutter |
| Rear | Locking back doors for rear loading |
| Side Glass | Tempered |
| Shelves | Height-adjustable, tiltable, with product stops |
| Lighting | LED in canopy and under shelves |
| Temperature Control | Digital controller |
| Exterior Front Panel | Silver colored PVC coated steel with blue decal |
| Interior | PVC coated steel, gray |
| End Panels | Foamed polystyrene, black |
| Kick Plate | Black steel |
| Insulation | CFC-free injected foam |
| Condensate Management | Removable evaporating pan |
| Condensing Unit | Slide-out for service access |
| Feet | Levelling feet |
| Overall Dimensions (W x D x H) | 60.6" x 36" x 65" |
| Net Weight | 510 lbs |
| Shipping Weight | 750 lbs |
| Crate Dimensions (L x W x H) | 64" x 39" x 74" |
| Operating Environment | Max 75°F, 55% RH |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
5 Year
Compressor (parts only)
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

