The IKON ISP36M Mega Top Sandwich / Salad Prep Table
The IKON ISP36M is a two-section mega top sandwich and salad prep table with 7.7 cubic feet of refrigerated storage and an extended pan rail that holds fifteen 1/6 GN portion control pans. The deeper mega top rail adds five more pan positions compared to the standard ISP36, so you can keep more toppings accessible without rotating containers in and out during the lunch rush. Two solid hinged doors each open to their own adjustable epoxy-coated wire shelf for organized backup storage. The rear-mounted 1/2 HP R290 compressor holds 33 to 40 degrees Fahrenheit.
Extended Mega Top Pan Rail with 1/6 x 4-Inch Portion Control Pans
The mega top pan rail extends deeper than the standard ISP models, holding significantly more 1/6 GN portion control pans so you can keep a wider variety of toppings, dressings, sliced proteins, and garnishes cold and accessible at the same time. The included four-inch-deep pans give you enough volume for a full prep batch of each ingredient without refilling mid-rush. A 9-inch removable polyethylene cutting board sits at the front of the pan rail for portioning, slicing, and assembly work. It lifts straight out when you need to clean it or swap in a fresh board. If your menu demands deeper wells for bulkier items like shredded lettuce or mounded toppings, the unit can be custom-ordered with 6-inch portion control pans.
Self-Closing Doors with Tool-Free Magnetic Gaskets
Each door is self-closing and holds open at 90 degrees so you can load the cabinet with both hands without fighting a swinging door. The magnetic gaskets snap in and out without tools, so when a gasket wears out, you replace it in under a minute rather than calling for service. Behind each door sits one adjustable heavy-duty epoxy-coated wire shelf that you can reposition to fit tall containers, half pans, or stacked deli trays. The electronic thermostat with a digital LED temperature display lets you confirm the cabinet temperature at a glance, and automatic defrost keeps the evaporator clear without manual intervention.
Rear-Mounted R290 Refrigeration with Auto Condensate Evaporation
The compressor mounts at the rear of the cabinet where it draws cooler air from behind the unit rather than pulling warm kitchen air from underneath. R290 refrigerant paired with foam insulation holds the interior between 33 and 40 degrees Fahrenheit. The auto condensate evaporation system eliminates drain pans and floor drains. The interior floor is 304 stainless steel for corrosion resistance where spills collect, with aluminum back walls and ABS side walls and door backs. The exterior is 430 stainless steel. Four 2.5-inch swivel casters with two front brakes let you roll the unit out for cleaning and lock it in place for service. Power runs on 115V/60/1 with a NEMA 5-15P plug and a 10-foot cord.
The ISP36M measures 36.2 inches wide by 34.5 inches deep by 43.2 inches high. The 1/2 HP compressor draws 4.3 amps on 115V/60/1 power. Shipping weight is 300 pounds.
About IKON
IKON is a commercial refrigeration line built for foodservice operations that balance back-of-house prep with front-of-house visibility. The range covers reach-ins, glass door merchandisers, prep tables, undercounters, and bar units, giving operators flexibility across kitchen and service areas. Units are constructed with stainless steel and use R290 refrigerant, with digital temperature controls that are easy to read and adjust during service. Bottom-mounted refrigeration is common across the line, which helps in hotter kitchen environments and simplifies routine cleaning. IKON is often used in restaurants, convenience stores, and bars that need consistent performance across mixed refrigeration formats.
Features & Benefits
-
Mega top sandwich and salad prep table with extended pan rail for maximum topping positions and full cabinet storage below
-
Two-section, 7.7 cu. ft. capacity
-
(15) 1/6 x 4" Portion Control GN pans included (custom 6" pans available)
-
9" removable polyethylene cutting board
-
(2) Solid Hinged Doors, self-closing, hold open at 90°
-
(2) Adjustable Shelves, heavy-duty epoxy-coated wire
-
Magnetic gaskets replaceable without tools
-
Temperature Range: 33-40°F (0.5-4°C)
-
Electronic thermostat with digital LED temperature display
-
Auto defrost and auto condensate evaporation
-
R290 refrigerant with foam insulation
-
Rear-mounted self-contained compressor, 1/2 HP, 4.3A
-
Interior: 304 stainless steel floor, aluminum back wall, ABS side walls and door backs
-
Exterior: 430 stainless steel
-
(4) 2.5" swivel casters, (2) front braked
-
Exterior Dimensions (W x D x H): 36.2" x 34.5" x 43.2"
-
Shipping Weight: 300 lbs
-
115V/60/1, NEMA 5-15P, 10 ft cord
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The IKON ISP36M Mega Top Sandwich / Salad Prep Table
The IKON ISP36M is a two-section mega top sandwich and salad prep table with 7.7 cubic feet of refrigerated storage and an extended pan rail that holds fifteen 1/6 GN portion control pans. The deeper mega top rail adds five more pan positions compared to the standard ISP36, so you can keep more toppings accessible without rotating containers in and out during the lunch rush. Two solid hinged doors each open to their own adjustable epoxy-coated wire shelf for organized backup storage. The rear-mounted 1/2 HP R290 compressor holds 33 to 40 degrees Fahrenheit.
Extended Mega Top Pan Rail with 1/6 x 4-Inch Portion Control Pans
The mega top pan rail extends deeper than the standard ISP models, holding significantly more 1/6 GN portion control pans so you can keep a wider variety of toppings, dressings, sliced proteins, and garnishes cold and accessible at the same time. The included four-inch-deep pans give you enough volume for a full prep batch of each ingredient without refilling mid-rush. A 9-inch removable polyethylene cutting board sits at the front of the pan rail for portioning, slicing, and assembly work. It lifts straight out when you need to clean it or swap in a fresh board. If your menu demands deeper wells for bulkier items like shredded lettuce or mounded toppings, the unit can be custom-ordered with 6-inch portion control pans.
Self-Closing Doors with Tool-Free Magnetic Gaskets
Each door is self-closing and holds open at 90 degrees so you can load the cabinet with both hands without fighting a swinging door. The magnetic gaskets snap in and out without tools, so when a gasket wears out, you replace it in under a minute rather than calling for service. Behind each door sits one adjustable heavy-duty epoxy-coated wire shelf that you can reposition to fit tall containers, half pans, or stacked deli trays. The electronic thermostat with a digital LED temperature display lets you confirm the cabinet temperature at a glance, and automatic defrost keeps the evaporator clear without manual intervention.
Rear-Mounted R290 Refrigeration with Auto Condensate Evaporation
The compressor mounts at the rear of the cabinet where it draws cooler air from behind the unit rather than pulling warm kitchen air from underneath. R290 refrigerant paired with foam insulation holds the interior between 33 and 40 degrees Fahrenheit. The auto condensate evaporation system eliminates drain pans and floor drains. The interior floor is 304 stainless steel for corrosion resistance where spills collect, with aluminum back walls and ABS side walls and door backs. The exterior is 430 stainless steel. Four 2.5-inch swivel casters with two front brakes let you roll the unit out for cleaning and lock it in place for service. Power runs on 115V/60/1 with a NEMA 5-15P plug and a 10-foot cord.
The ISP36M measures 36.2 inches wide by 34.5 inches deep by 43.2 inches high. The 1/2 HP compressor draws 4.3 amps on 115V/60/1 power. Shipping weight is 300 pounds.
About IKON
IKON is a commercial refrigeration line built for foodservice operations that balance back-of-house prep with front-of-house visibility. The range covers reach-ins, glass door merchandisers, prep tables, undercounters, and bar units, giving operators flexibility across kitchen and service areas. Units are constructed with stainless steel and use R290 refrigerant, with digital temperature controls that are easy to read and adjust during service. Bottom-mounted refrigeration is common across the line, which helps in hotter kitchen environments and simplifies routine cleaning. IKON is often used in restaurants, convenience stores, and bars that need consistent performance across mixed refrigeration formats.
Features & Benefits
-
Mega top sandwich and salad prep table with extended pan rail for maximum topping positions and full cabinet storage below
-
Two-section, 7.7 cu. ft. capacity
-
(15) 1/6 x 4" Portion Control GN pans included (custom 6" pans available)
-
9" removable polyethylene cutting board
-
(2) Solid Hinged Doors, self-closing, hold open at 90°
-
(2) Adjustable Shelves, heavy-duty epoxy-coated wire
-
Magnetic gaskets replaceable without tools
-
Temperature Range: 33-40°F (0.5-4°C)
-
Electronic thermostat with digital LED temperature display
-
Auto defrost and auto condensate evaporation
-
R290 refrigerant with foam insulation
-
Rear-mounted self-contained compressor, 1/2 HP, 4.3A
-
Interior: 304 stainless steel floor, aluminum back wall, ABS side walls and door backs
-
Exterior: 430 stainless steel
-
(4) 2.5" swivel casters, (2) front braked
-
Exterior Dimensions (W x D x H): 36.2" x 34.5" x 43.2"
-
Shipping Weight: 300 lbs
-
115V/60/1, NEMA 5-15P, 10 ft cord
Resources & Downloads
See all from IKON
Specifications
| Overall Dimensions (W x D x H) | 36.2" x 34.5" x 43.2" |
| Capacity | 7.7 cu. ft. |
| Sections | 2 |
| Pan Rail | (15) 1/6 x 4" GN Portion Control Pans (included), Mega Top |
| Cutting Board | 9" Removable Polyethylene |
| Temperature Range | 33-40°F (0.5-4°C) |
| Doors | (2) Solid Hinged Doors |
| Shelves | (2) Adjustable Shelves, Epoxy-Coated Wire |
| Refrigerant | R290 |
| Compressor Size | 1/2 HP |
| Compressor Location | Rear-Mounted, Self-Contained |
| Rated Current | 4.3A |
| Insulation | Foam |
| Defrost | Auto Defrost |
| Condensate | Auto Evaporation |
| Interior Floor | 304 Stainless Steel |
| Interior Back Wall | Aluminum |
| Interior Side Walls / Door Backs | ABS |
| Exterior | 430 Stainless Steel |
| Casters | (4) 2.5" Swivel, (2) Front Braked |
| Shipping Weight | 300 lbs |
| Voltage | 115V/60/1 |
| NEMA Plug | 5-15P |
| Cord Length | 10 ft |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
3 Year
Compressor (Parts Only)
Certifications & Approvals
-
ETL Sanitation

