The Atosa AMC-3401 Milk Cooler
The Atosa AMC-3401 forced air milk cooler provides rapid, reliable cooling for milk and dairy products in commercial kitchens, cafeterias, and convenience stores. Its 11.69 cubic foot capacity holds up to eight standard 13" x 13" milk crates, delivering consistent refrigeration performance in tight spaces. This compact design helps reduce spoilage and extends product shelf life in moderate-volume operations.
Top Mount Forced Air Refrigeration for Uniform Temperature Control
A top-mounted forced air refrigeration system circulates chilled air evenly throughout the cabinet, eliminating hot spots and temperature swings found in passive systems. Every milk crate, whether at the back or bottom, receives uniform cooling to protect product quality and prevent bacterial growth. The 1/7 HP compressor uses R290 refrigerant for efficient operation and reduced environmental impact.
Single Sided Sliding Door with Heavy Duty Reinforced Floor
The single sliding door provides convenient front access while maintaining a compact footprint ideal forA single sliding door offers easy front access and keeps the footprint compact for tight kitchen layouts or wall installations. The reinforced floor supports fully loaded milk crates without sagging, protecting the unit from damage and maintaining structural integrity at full capacity. Dunnage racks lift crates off the floor to improve airflow and make cleaning easier.y from stainless steel inside and out, the AMC-3401 resists corrosion from condensation and repeated cleaning with commercial sanitizers, maintaining a professional appearance and meeting health department standards for food contact surfaces. The digital temperature controller provides precise monitoring and adjustment, with recommended settings between 35°F and 38°F for optimal milk preservation. Snap-in door gaskets create an airtight seal that maintains internal temperatures while allowing for quick gasket replacement during routine maintenance, reducing downtime and service costs.
A standard door lock secures inventory during off-hours. Metal door handles are built to withstand repeated use in high-volume settings. The floor drain with plug lets you flush the interior and drain condensation easily, without moving the unit or using a wet vacuum. The AMC-3401 runs on standard 115V power with a NEMA 5-15P plug, so no special electrical installation is needed.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
11.69 cubic foot capacity holds 8 standard 13" x 13" milk crates
-
Single sided sliding door for front access
-
Top mount forced air refrigeration for uniform temperature distribution
-
Stainless steel exterior and interior construction
-
Digital temperature controller for precise monitoring
-
Heavy duty reinforced floor supports full load capacity
-
Dunnage racks included for elevated storage and airflow
-
Metal door handles for durability
-
Standard door lock for security
-
Snap-in door gaskets for easy replacement
-
Floor drain with plug for simplified cleaning
-
R290 refrigerant for efficient, environmentally responsible cooling
-
1/7 HP compressor
-
115V/60Hz single-phase power with NEMA 5-15P plug
-
4" casters for mobility
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Atosa AMC-3401 Milk Cooler
The Atosa AMC-3401 forced air milk cooler provides rapid, reliable cooling for milk and dairy products in commercial kitchens, cafeterias, and convenience stores. Its 11.69 cubic foot capacity holds up to eight standard 13" x 13" milk crates, delivering consistent refrigeration performance in tight spaces. This compact design helps reduce spoilage and extends product shelf life in moderate-volume operations.
Top Mount Forced Air Refrigeration for Uniform Temperature Control
A top-mounted forced air refrigeration system circulates chilled air evenly throughout the cabinet, eliminating hot spots and temperature swings found in passive systems. Every milk crate, whether at the back or bottom, receives uniform cooling to protect product quality and prevent bacterial growth. The 1/7 HP compressor uses R290 refrigerant for efficient operation and reduced environmental impact.
Single Sided Sliding Door with Heavy Duty Reinforced Floor
The single sliding door provides convenient front access while maintaining a compact footprint ideal forA single sliding door offers easy front access and keeps the footprint compact for tight kitchen layouts or wall installations. The reinforced floor supports fully loaded milk crates without sagging, protecting the unit from damage and maintaining structural integrity at full capacity. Dunnage racks lift crates off the floor to improve airflow and make cleaning easier.y from stainless steel inside and out, the AMC-3401 resists corrosion from condensation and repeated cleaning with commercial sanitizers, maintaining a professional appearance and meeting health department standards for food contact surfaces. The digital temperature controller provides precise monitoring and adjustment, with recommended settings between 35°F and 38°F for optimal milk preservation. Snap-in door gaskets create an airtight seal that maintains internal temperatures while allowing for quick gasket replacement during routine maintenance, reducing downtime and service costs.
A standard door lock secures inventory during off-hours. Metal door handles are built to withstand repeated use in high-volume settings. The floor drain with plug lets you flush the interior and drain condensation easily, without moving the unit or using a wet vacuum. The AMC-3401 runs on standard 115V power with a NEMA 5-15P plug, so no special electrical installation is needed.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
11.69 cubic foot capacity holds 8 standard 13" x 13" milk crates
-
Single sided sliding door for front access
-
Top mount forced air refrigeration for uniform temperature distribution
-
Stainless steel exterior and interior construction
-
Digital temperature controller for precise monitoring
-
Heavy duty reinforced floor supports full load capacity
-
Dunnage racks included for elevated storage and airflow
-
Metal door handles for durability
-
Standard door lock for security
-
Snap-in door gaskets for easy replacement
-
Floor drain with plug for simplified cleaning
-
R290 refrigerant for efficient, environmentally responsible cooling
-
1/7 HP compressor
-
115V/60Hz single-phase power with NEMA 5-15P plug
-
4" casters for mobility
Resources & Downloads
See all from Atosa
Specifications
| Capacity | 11.69 Cu. Ft. |
| Milk Crate Capacity | 8 (13" x 13" crates) |
| Number of Doors | 1 (Single Sided Sliding) |
| Refrigeration Type | Top Mount Forced Air |
| Compressor Power | 1/7 HP |
| Refrigerant | R290 |
| Voltage | 115V / 60Hz / 1-Phase |
| Rated Current | 2.2 A |
| Plug Type | NEMA 5-15P |
| Casters | 4" |
| Exterior Dimensions | 34" (W) x 32 1/8" (D) x 47 1/8" (H) |
| Net Weight | 234 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

