The Prepline ENCTGM-60-N/L Gas Griddle
The Prepline ENCTGM-60-N/L is a 60 inch countertop gas griddle with manual controls and 150,000 BTU of total output, built for diners, burger bars, taquerias, and breakfast lines that live on the flat top. The cooking surface measures 59.1 inches wide by 19 inches deep, and the unit ships set up for natural gas with liquid propane conversion kits included in the box, so the same griddle drops onto a city gas line or a propane-fed food truck without ordering extra parts. That N/L flexibility is why the model works for operators who move locations or run mixed fuel sites.
3/4 In. Thick Steel Plate That Holds Its Heat
The griddle plate is 3/4 inch thick steel, noticeably heavier than the 1/2 inch plates on lighter countertop units. Mass is what a griddle plate is for: when a dozen frozen burger patties hit the surface, a thick plate barely dips in temperature and sears immediately, while a thin plate sags into the gray-meat zone and takes minutes to climb back. The extra steel also spreads heat sideways, evening out the hot and cool stripes that plague thin plates.
Five Independent 30,000 BTU Burners
Five U-shaped burners run under the plate at 30,000 BTU each, each with its own manual valve. Independent zones let you run the classic split: one zone at egg and pancake temperature, the middle at burger sear, and the edge on low for holding toasted buns. U-shaped tubes sweep flame across more plate area per burner than straight tubes, which is where the even edge-to-edge cooking comes from.
Splash Control and a Removable Grease Tray
A fully welded backsplash with matching side splashes keeps grease pops off the wall and neighboring stations, and the extended cool-touch front edge gives the cook a safe place to rest a spatula hand. Runoff channels into a removable stainless steel grease tray that empties in one trip to the waste bin. The body is stainless steel on adjustable legs, and gas connects at the rear through a 3/4 inch fitting, keeping the hose out of the work zone.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Countertop flat top sized for diners, burger bars, and breakfast lines
-
Thick 3/4 inch steel plate sears frozen patties without a temperature sag
-
Plate mass evens out the hot and cool stripes thin griddles suffer
-
Independent burner zones run eggs, sear, and holding side by side
-
U-shaped burner tubes sweep flame across more plate area per burner
-
Ships on natural gas with liquid propane conversion kits in the box
-
Fully welded backsplash and side splashes keep grease off the wall
-
Extended cool-touch front edge protects the spatula hand
-
Removable stainless steel grease tray empties in one trip
-
Stainless steel body on adjustable legs wipes down with the line
-
Rear gas connection keeps the hose out of the work zone
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Prepline ENCTGM-60-N/L Gas Griddle
The Prepline ENCTGM-60-N/L is a 60 inch countertop gas griddle with manual controls and 150,000 BTU of total output, built for diners, burger bars, taquerias, and breakfast lines that live on the flat top. The cooking surface measures 59.1 inches wide by 19 inches deep, and the unit ships set up for natural gas with liquid propane conversion kits included in the box, so the same griddle drops onto a city gas line or a propane-fed food truck without ordering extra parts. That N/L flexibility is why the model works for operators who move locations or run mixed fuel sites.
3/4 In. Thick Steel Plate That Holds Its Heat
The griddle plate is 3/4 inch thick steel, noticeably heavier than the 1/2 inch plates on lighter countertop units. Mass is what a griddle plate is for: when a dozen frozen burger patties hit the surface, a thick plate barely dips in temperature and sears immediately, while a thin plate sags into the gray-meat zone and takes minutes to climb back. The extra steel also spreads heat sideways, evening out the hot and cool stripes that plague thin plates.
Five Independent 30,000 BTU Burners
Five U-shaped burners run under the plate at 30,000 BTU each, each with its own manual valve. Independent zones let you run the classic split: one zone at egg and pancake temperature, the middle at burger sear, and the edge on low for holding toasted buns. U-shaped tubes sweep flame across more plate area per burner than straight tubes, which is where the even edge-to-edge cooking comes from.
Splash Control and a Removable Grease Tray
A fully welded backsplash with matching side splashes keeps grease pops off the wall and neighboring stations, and the extended cool-touch front edge gives the cook a safe place to rest a spatula hand. Runoff channels into a removable stainless steel grease tray that empties in one trip to the waste bin. The body is stainless steel on adjustable legs, and gas connects at the rear through a 3/4 inch fitting, keeping the hose out of the work zone.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Countertop flat top sized for diners, burger bars, and breakfast lines
-
Thick 3/4 inch steel plate sears frozen patties without a temperature sag
-
Plate mass evens out the hot and cool stripes thin griddles suffer
-
Independent burner zones run eggs, sear, and holding side by side
-
U-shaped burner tubes sweep flame across more plate area per burner
-
Ships on natural gas with liquid propane conversion kits in the box
-
Fully welded backsplash and side splashes keep grease off the wall
-
Extended cool-touch front edge protects the spatula hand
-
Removable stainless steel grease tray empties in one trip
-
Stainless steel body on adjustable legs wipes down with the line
-
Rear gas connection keeps the hose out of the work zone
Resources & Downloads
See all from Prepline
Specifications
| Cooking Surface Width | 59.1" |
| Cooking Surface Depth | 19" |
| Griddle Plate Thickness | 3/4" |
| Cooking Surface Material | Stainless Steel |
| Number of Burners | 5 |
| Burner Rating | 30,000 BTU each |
| Burner Style | U-Shaped |
| Total Rating | 150,000 BTU |
| Control Type | Manual |
| Gas Type | Natural Gas, convertible to Liquid Propane |
| LP Conversion Kits | Included |
| Gas Connection | 3/4", rear |
| Exterior Material | Stainless Steel |
| Frame Structure | Welded |
| Back Splash | Fully welded, with side splashes |
| Front Edge | Extended, cool-touch |
| Grease Tray | Removable, stainless steel |
| Legs | 4, adjustable |
| Exterior Dimensions | 59.13"L x 26.20"D x 15.79"H |
| Packaging Dimensions | 62"L x 33"D x 23"H |
| Unit Weight | 386 lb. |
| Shipping Weight | 430 lb. |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts

