The Prepline PWTG-3672 Work Table
The Prepline PWTG-3672 is a 72 inch long, 36 inch deep stainless steel worktable with a galvanized undershelf, sized for kitchens that need a genuinely deep work surface. The extra foot of depth over a standard 24 inch table is the difference between a station where sheet pans, a scale, and a cutting board fight for space and one where all three sit side by side with room left for the prep list. Bakeries rolling out dough, butcher stations breaking down primals, and packaging lines boxing orders are the natural homes for a 36 inch deep top.
18 Gauge 430 Stainless Steel Top with Hat Channel Reinforcement
The top is 18 gauge 430 stainless steel rated to carry 670 pounds, reinforced underneath by a hat channel frame with sound-deadening tape between the channel and the top skin. That tape is a small detail you notice every shift: drop a stack of steam pans on an unbacked table and it rings like a bell, while this top lands them with a thud. The leg sockets are recessed into the channel frame itself, so racking forces pass into the frame instead of working the welds loose, and every edge is finished so nobody leaves skin on a corner during a rush.
Galvanized Undershelf Rated for 440 Pounds
Below the top, a 66 by 30 inch undershelf in 18 gauge anti-corrosion galvanized steel holds up to 440 pounds of mixer bowls, bus tubs, and bulk containers. The shelf height adjusts, so tall stock pots fit underneath when you need them to, and the whole understructure shrugs off the wet mop-and-splash cycle of a commercial kitchen floor.
Adjustable Height from 34 to 36 Inches
Plastic bullet feet thread in and out to set the working height anywhere from 34 to 36 inches, which levels the table on an uneven slab and matches it to the equipment beside it. An anti-wobble leg and socket design keeps the assembled table rigid.
Knock-Down Design with Installation Kit
The table ships flat at 107 pounds in a 73 by 37 by 3 inch carton, fits through any service door, and assembles with the included installation kit. Knock-down construction also means a single replacement part, not a whole table, if a component is ever damaged.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Extra-deep 36 inch by 72 inch stainless steel work surface for bakery, butcher, and packing stations
-
18 gauge 430 stainless steel top reinforced with a hat channel frame
-
Sound-deadening tape between channel frame and top quiets pan drops
-
Galvanized 18 gauge undershelf holds bulk containers and bus tubs
-
Both undershelf and bullet feet adjust for uneven floors
-
Working height sets anywhere from 34 to 36 inches
-
Recessed leg sockets and anti-wobble design keep the table rigid
-
All edges finished for safe handling
-
Knock-down design ships flat and assembles with the included installation kit
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Extra-deep 36 inch by 72 inch stainless steel work surface for bakery, butcher, and packing stations
18 gauge 430 stainless steel top reinforced with a hat channel frame
Sound-deadening tape between channel frame and top quiets pan drops
Galvanized 18 gauge undershelf holds bulk containers and bus tubs
Both undershelf and bullet feet adjust for uneven floors
The Prepline PWTG-3672 Work Table
The Prepline PWTG-3672 is a 72 inch long, 36 inch deep stainless steel worktable with a galvanized undershelf, sized for kitchens that need a genuinely deep work surface. The extra foot of depth over a standard 24 inch table is the difference between a station where sheet pans, a scale, and a cutting board fight for space and one where all three sit side by side with room left for the prep list. Bakeries rolling out dough, butcher stations breaking down primals, and packaging lines boxing orders are the natural homes for a 36 inch deep top.
18 Gauge 430 Stainless Steel Top with Hat Channel Reinforcement
The top is 18 gauge 430 stainless steel rated to carry 670 pounds, reinforced underneath by a hat channel frame with sound-deadening tape between the channel and the top skin. That tape is a small detail you notice every shift: drop a stack of steam pans on an unbacked table and it rings like a bell, while this top lands them with a thud. The leg sockets are recessed into the channel frame itself, so racking forces pass into the frame instead of working the welds loose, and every edge is finished so nobody leaves skin on a corner during a rush.
Galvanized Undershelf Rated for 440 Pounds
Below the top, a 66 by 30 inch undershelf in 18 gauge anti-corrosion galvanized steel holds up to 440 pounds of mixer bowls, bus tubs, and bulk containers. The shelf height adjusts, so tall stock pots fit underneath when you need them to, and the whole understructure shrugs off the wet mop-and-splash cycle of a commercial kitchen floor.
Adjustable Height from 34 to 36 Inches
Plastic bullet feet thread in and out to set the working height anywhere from 34 to 36 inches, which levels the table on an uneven slab and matches it to the equipment beside it. An anti-wobble leg and socket design keeps the assembled table rigid.
Knock-Down Design with Installation Kit
The table ships flat at 107 pounds in a 73 by 37 by 3 inch carton, fits through any service door, and assembles with the included installation kit. Knock-down construction also means a single replacement part, not a whole table, if a component is ever damaged.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Extra-deep 36 inch by 72 inch stainless steel work surface for bakery, butcher, and packing stations
-
18 gauge 430 stainless steel top reinforced with a hat channel frame
-
Sound-deadening tape between channel frame and top quiets pan drops
-
Galvanized 18 gauge undershelf holds bulk containers and bus tubs
-
Both undershelf and bullet feet adjust for uneven floors
-
Working height sets anywhere from 34 to 36 inches
-
Recessed leg sockets and anti-wobble design keep the table rigid
-
All edges finished for safe handling
-
Knock-down design ships flat and assembles with the included installation kit
Resources & Downloads
See all from Prepline
Specifications
| Overall Dimensions | 72"L x 36"D x 34"H |
| Adjustable Height Range | 34" - 36" |
| Top Material | 18 Gauge 430 Stainless Steel |
| Top Shelf Capacity | 670 lb. |
| Undershelf Dimensions | 66"L x 30"D |
| Undershelf Material | 18 Gauge Galvanized Steel |
| Undershelf Capacity | 440 lb. |
| Frame Reinforcement | Hat channel with recessed sockets |
| Feet | Plastic adjustable bullet feet |
| Assembly | Knock-down, installation kit included |
| Shipping Weight | 107 lb. |
| Shipping Dimensions | 73"L x 37"D x 3"H |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
Extra-deep 36 inch by 72 inch stainless steel work surface for bakery, butcher, and packing stations