Skip to content

Prepline PWTG-3696 36" x 96" x 34"H Stainless Steel Worktable, 18 Gauge 430 SS Top with Galvanized Undershelf

SKUPWTG-3696 BrandPrepline

The Prepline PWTG-3696 Work Table

The Prepline PWTG-3696 is an 8 foot long, 36 inch deep stainless steel worktable with a galvanized undershelf, the largest work surface most kitchens will ever put in one place. Twenty-four square feet of top means a full catering order gets plated in one pass, a bakery can stage a whole rack of sheet pans while dough rests, and a commissary packing line fits scale, boxes, and product on a single table instead of three pushed together with seams where flour and juice collect.

18 Gauge 430 Stainless Steel Top with Hat Channel Reinforcement

The 96 by 36 inch top is 18 gauge 430 stainless steel rated to carry 820 pounds, and at this length the hat channel reinforcement underneath is what keeps the center of the span from oil-canning under a loaded mixer. Sound-deadening tape between the channel frame and the top skin turns pan drops into dull thuds instead of ringing crashes. Leg sockets recess into the channel frame so an 8 foot lever of a tabletop cannot work the joints loose, and every edge arrives finished, with no burrs waiting at hip height.

Galvanized Undershelf Rated for 510 Pounds

The 90 by 30 inch undershelf in 18 gauge anti-corrosion galvanized steel carries up to 510 pounds, which in practice is a full shift of backup: bus tubs, lexans of prepped product, and the stand mixer that has no other home. The shelf height adjusts to fit what you actually store, and galvanized steel takes nightly mop splash without rusting out the way painted shelving does.

Adjustable Height from 34 to 36 Inches

Plastic bullet feet dial the working height between 34 and 36 inches, letting you level an 8 foot span across the floor slopes that long walls almost always hide. The anti-wobble leg and socket design matters more at this size than any other, because a slight rock at one corner of an 8 foot table becomes a visible seesaw at the far end.

Knock-Down Design with Installation Kit

Despite the size, the table ships flat at 163 pounds in a 97 by 37 by 3 inch carton that moves through standard doorways on a hand truck. Assembly uses the included installation kit, and the knock-down design means the table comes back apart if the kitchen layout ever changes.

About Prepline

Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.

Features & Benefits

  1. Full 8 foot by 36 inch deep stainless steel work surface for catering, bakery, and commissary lines
  2. 18 gauge 430 stainless steel top reinforced with a hat channel frame
  3. Sound-deadening tape between channel frame and top quiets the span
  4. Galvanized 18 gauge undershelf stores a full shift of backup product
  5. Both undershelf and bullet feet adjust for uneven floors
  6. Working height sets anywhere from 34 to 36 inches
  7. Recessed leg sockets and anti-wobble design keep the long span rigid
  8. All edges finished for safe handling
  9. Knock-down design ships flat and assembles with the included installation kit

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$950.00
  • Full 8 foot by 36 inch deep stainless steel work surface for catering, bakery, and commissary lines
  • 18 gauge 430 stainless steel top reinforced with a hat channel frame
  • Sound-deadening tape between channel frame and top quiets the span
  • Galvanized 18 gauge undershelf stores a full shift of backup product
  • Both undershelf and bullet feet adjust for uneven floors
  • See full feature list

    The Prepline PWTG-3696 Work Table

    The Prepline PWTG-3696 is an 8 foot long, 36 inch deep stainless steel worktable with a galvanized undershelf, the largest work surface most kitchens will ever put in one place. Twenty-four square feet of top means a full catering order gets plated in one pass, a bakery can stage a whole rack of sheet pans while dough rests, and a commissary packing line fits scale, boxes, and product on a single table instead of three pushed together with seams where flour and juice collect.

    18 Gauge 430 Stainless Steel Top with Hat Channel Reinforcement

    The 96 by 36 inch top is 18 gauge 430 stainless steel rated to carry 820 pounds, and at this length the hat channel reinforcement underneath is what keeps the center of the span from oil-canning under a loaded mixer. Sound-deadening tape between the channel frame and the top skin turns pan drops into dull thuds instead of ringing crashes. Leg sockets recess into the channel frame so an 8 foot lever of a tabletop cannot work the joints loose, and every edge arrives finished, with no burrs waiting at hip height.

    Galvanized Undershelf Rated for 510 Pounds

    The 90 by 30 inch undershelf in 18 gauge anti-corrosion galvanized steel carries up to 510 pounds, which in practice is a full shift of backup: bus tubs, lexans of prepped product, and the stand mixer that has no other home. The shelf height adjusts to fit what you actually store, and galvanized steel takes nightly mop splash without rusting out the way painted shelving does.

    Adjustable Height from 34 to 36 Inches

    Plastic bullet feet dial the working height between 34 and 36 inches, letting you level an 8 foot span across the floor slopes that long walls almost always hide. The anti-wobble leg and socket design matters more at this size than any other, because a slight rock at one corner of an 8 foot table becomes a visible seesaw at the far end.

    Knock-Down Design with Installation Kit

    Despite the size, the table ships flat at 163 pounds in a 97 by 37 by 3 inch carton that moves through standard doorways on a hand truck. Assembly uses the included installation kit, and the knock-down design means the table comes back apart if the kitchen layout ever changes.

    About Prepline

    Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.

    Features & Benefits

    1. Full 8 foot by 36 inch deep stainless steel work surface for catering, bakery, and commissary lines
    2. 18 gauge 430 stainless steel top reinforced with a hat channel frame
    3. Sound-deadening tape between channel frame and top quiets the span
    4. Galvanized 18 gauge undershelf stores a full shift of backup product
    5. Both undershelf and bullet feet adjust for uneven floors
    6. Working height sets anywhere from 34 to 36 inches
    7. Recessed leg sockets and anti-wobble design keep the long span rigid
    8. All edges finished for safe handling
    9. Knock-down design ships flat and assembles with the included installation kit

    See all from Prepline

    Specifications

    Overall Dimensions96"L x 36"D x 34"H
    Adjustable Height Range34" - 36"
    Top Material18 Gauge 430 Stainless Steel
    Top Shelf Capacity820 lb.
    Undershelf Dimensions90"L x 30"D
    Undershelf Material18 Gauge Galvanized Steel
    Undershelf Capacity510 lb.
    Frame ReinforcementHat channel with recessed sockets
    FeetPlastic adjustable bullet feet
    AssemblyKnock-down, installation kit included
    Shipping Weight163 lb.
    Shipping Dimensions97"L x 37"D x 3"H

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Prepline PWTG-3696 Work Table

    About Prepline

    Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.

    Product Features

    1. Full 8 foot by 36 inch deep stainless steel work surface for catering, bakery, and commissary lines
    2. 18 gauge 430 stainless steel top reinforced with a hat channel frame
    3. Sound-deadening tape between channel frame and top quiets the span
    4. Galvanized 18 gauge undershelf stores a full shift of backup product
    5. Both undershelf and bullet feet adjust for uneven floors
    6. Working height sets anywhere from 34 to 36 inches
    7. Recessed leg sockets and anti-wobble design keep the long span rigid
    8. All edges finished for safe handling
    9. Knock-down design ships flat and assembles with the included installation kit

    See all from Prepline

    Specifications

    Overall Dimensions96"L x 36"D x 34"H
    Adjustable Height Range34" - 36"
    Top Material18 Gauge 430 Stainless Steel
    Top Shelf Capacity820 lb.
    Undershelf Dimensions90"L x 30"D
    Undershelf Material18 Gauge Galvanized Steel
    Undershelf Capacity510 lb.
    Frame ReinforcementHat channel with recessed sockets
    FeetPlastic adjustable bullet feet
    AssemblyKnock-down, installation kit included
    Shipping Weight163 lb.
    Shipping Dimensions97"L x 37"D x 3"H

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch