The Prepline ST-3048 Sink Table
The Prepline ST-3048 is a 30 by 48 inch stainless steel work table with a sink built into the left end and a faucet already mounted on the deck. It merges two pieces of equipment into one footprint: a rinse and wash point where produce gets cleaned or pots get a quick scrub, and a work surface right beside it where the prep actually happens. For a small kitchen adding a station, that combination saves both floor space and a second plumbing rough-in.
16 Gauge 304 Stainless Steel Top
The top is a single 16 gauge sheet of type 304 stainless steel, heavy enough to run a countertop slicer or a stand mixer without flexing under the vibration. Type 304 resists the acids in produce and the salt in brines that stain lighter grades, and the surface at a 35.5 inch working height wipes down to a sanitary finish in seconds between tasks.
Built In 16 by 20 In. Sink with Deck Mounted Faucet
The integral bowl measures 16 inches left to right by 20 inches front to back and runs 12 inches deep, sized to soak sheet pans on edge or wash greens in volume. The deck mounted faucet comes with the table, so there is no separate fixture to source and no wall plumbing to route. Because the bowl is welded into the top rather than dropped in, there is no rim seam to trap food and water.
5 In. Backsplash Protects the Wall
A 5 inch backsplash rises along the rear edge, catching faucet spray and prep splatter before it reaches the painted wall behind the table. That keeps the wall inspection-clean and saves the repainting that open-backed tables eventually force.
Adjustable Undershelf and Bullet Feet
The full width undershelf adjusts in height to fit stockpots, cambros, or cases of product underneath the work surface, turning otherwise dead space into storage. Adjustable stainless steel bullet feet level the table on uneven floors, so the bowl drains completely and the top sits flat for knife work.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Work table and wash station combined into a single plumbing rough-in
-
Heavy gauge stainless top runs slicers and mixers without flexing
-
Deep welded-in bowl soaks sheet pans on edge and washes produce in volume
-
Deck mounted faucet included, no separate fixture to source
-
Backsplash catches spray before it stains the wall behind the station
-
Undershelf adjusts in height to fit stockpots and cases of product
-
Adjustable stainless bullet feet level the table so the bowl drains completely
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Work table and wash station combined into a single plumbing rough-in
Heavy gauge stainless top runs slicers and mixers without flexing
Deep welded-in bowl soaks sheet pans on edge and washes produce in volume
Deck mounted faucet included, no separate fixture to source
Backsplash catches spray before it stains the wall behind the station
The Prepline ST-3048 Sink Table
The Prepline ST-3048 is a 30 by 48 inch stainless steel work table with a sink built into the left end and a faucet already mounted on the deck. It merges two pieces of equipment into one footprint: a rinse and wash point where produce gets cleaned or pots get a quick scrub, and a work surface right beside it where the prep actually happens. For a small kitchen adding a station, that combination saves both floor space and a second plumbing rough-in.
16 Gauge 304 Stainless Steel Top
The top is a single 16 gauge sheet of type 304 stainless steel, heavy enough to run a countertop slicer or a stand mixer without flexing under the vibration. Type 304 resists the acids in produce and the salt in brines that stain lighter grades, and the surface at a 35.5 inch working height wipes down to a sanitary finish in seconds between tasks.
Built In 16 by 20 In. Sink with Deck Mounted Faucet
The integral bowl measures 16 inches left to right by 20 inches front to back and runs 12 inches deep, sized to soak sheet pans on edge or wash greens in volume. The deck mounted faucet comes with the table, so there is no separate fixture to source and no wall plumbing to route. Because the bowl is welded into the top rather than dropped in, there is no rim seam to trap food and water.
5 In. Backsplash Protects the Wall
A 5 inch backsplash rises along the rear edge, catching faucet spray and prep splatter before it reaches the painted wall behind the table. That keeps the wall inspection-clean and saves the repainting that open-backed tables eventually force.
Adjustable Undershelf and Bullet Feet
The full width undershelf adjusts in height to fit stockpots, cambros, or cases of product underneath the work surface, turning otherwise dead space into storage. Adjustable stainless steel bullet feet level the table on uneven floors, so the bowl drains completely and the top sits flat for knife work.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Work table and wash station combined into a single plumbing rough-in
-
Heavy gauge stainless top runs slicers and mixers without flexing
-
Deep welded-in bowl soaks sheet pans on edge and washes produce in volume
-
Deck mounted faucet included, no separate fixture to source
-
Backsplash catches spray before it stains the wall behind the station
-
Undershelf adjusts in height to fit stockpots and cases of product
-
Adjustable stainless bullet feet level the table so the bowl drains completely
Resources & Downloads
See all from Prepline
Specifications
| Overall Dimensions | 48"L x 30"W x 40.5"H |
| Working Height | 35.5" |
| Bowl Length (Left to Right) | 16" |
| Bowl Width (Front to Back) | 20" |
| Bowl Depth | 12" |
| Backsplash | 5" |
| Top Material | 16 Gauge 304 Stainless Steel |
| Faucet | Deck mounted, included |
| Undershelf | Adjustable |
| Feet | Adjustable stainless steel bullet |
Work table and wash station combined into a single plumbing rough-in