True T-49DT-HC Reach-In Refrigerator Freezer, 54 1/8" Wide, 2 Doors, 6 Shelves, T-Series

A commercial reach-in refrigerator freezer combo puts both cold and frozen storage in one upright cabinet. This saves floor space and cuts down on the number of units you need to manage. Restaurants, delis, catering kitchens, and smaller operations use them when there just isn't room for separate reach-ins. You get both functions in one unit, so you keep your equipment footprint small without losing storage.

Most commercial refrigerator freezer combos are side-by-side units. The refrigerator is on one side, the freezer on the other. Each section has its own door and its own temperature controls, so you keep both sides at the right temperature no matter how often you open the doors. Some models put the refrigerator on top and the freezer below, which can work better if you need a narrower footprint.

You can get commercial reach-in refrigerator freezer combos in different sizes to fit your kitchen. A 48 inch combo is a solid pick for mid-size operations. Smaller units work if you have tight spaces or lower volume. Pick your size based on how much storage you need, your available floor space, and how your staff needs to access product during service.

Common Types and Configurations

• Side-by-Side Commercial Refrigerator Freezer Combo: The standard setup. Refrigerator and freezer sections are next to each other in one cabinet, each with its own door and temperature controls. You get equal access to both during service.
• Top and Bottom Combo Unit: Refrigerator on top, freezer below, or the other way around. Use this if a side-by-side unit is too wide for your space.
• 48 Inch Combo Unit: A mid-size unit that balances storage and footprint. Good for most full-service restaurants and delis that need both cold and frozen storage in one cabinet.
• Small Commercial Refrigerator Freezer Combo: Compact units for low-volume kitchens or tight spaces. You still get both cold and frozen storage, just in a smaller footprint.
• Glass Door Combo Unit: Glass doors on one or both sections let you see what's inside without opening the unit. Handy for self-serve or busy service areas.

What to Look at Before You Buy

• Cabinet Configuration: Pick side-by-side or top-and-bottom based on your floor space and how your staff needs to access product. Side-by-side units are wider but let you reach both sections at the same height.
• Independent Temperature Controls: Each section should have its own thermostat and run independently. That way, your refrigerator stays between 33°F and 41°F, and your freezer holds at 0°F or below, with no crossover.
• Storage Capacity: Figure out how much cold and frozen storage you really need at the line or station. If you need a lot more of one than the other, a dedicated reach-in might be a better fit than a combo.
• Unit Width: Side-by-side combos are wider than single-section reach-ins. Measure your floor space and make sure the unit fits before you order.
• Compressor Location: Most combos have either a top-mount or bottom-mount compressor. Top-mount works better in hot kitchens. Check the location and make sure you have enough clearance for airflow.
• Door Configuration: Solid doors insulate better and hold temperature. Glass doors let you see inside and speed up workflow. Pick what fits your staff's needs during service.

Frequently Asked Questions

What is a commercial reach-in refrigerator freezer combo?

A commercial reach-in refrigerator freezer combo is one upright cabinet with both a refrigerator and a freezer section. Each runs on its own temperature controls, so the refrigerator holds 33°F to 41°F and the freezer stays at 0°F or below. These units are for restaurants, delis, and other foodservice operations that need both cold and frozen storage but want to keep their equipment footprint small.

What is the difference between a side-by-side and a split-door combo unit?

A side-by-side combo puts the refrigerator and freezer next to each other in one wide cabinet, each with its own door. A split-door unit stacks them vertically in a narrower cabinet, with one door on top and one on the bottom. Side-by-side units let you reach both sections at a comfortable height. Split-door units save floor space but mean you have to crouch to get to the lower section.

When does it make sense to use a combo unit instead of separate refrigerator and freezer units?

A combo unit is a good choice when you need both cold and frozen storage but don't have space for two separate reach-ins. They're a fit for smaller restaurants, delis, food trucks, and catering kitchens with moderate volume. If you use a lot more of one type of storage, or need high capacity for both, go with dedicated units instead.

Related Categories

• Reach-In Refrigerators
• Reach-In Freezers
• Undercounter Refrigerators
• Worktop Refrigerators

Shop by Brand

• Atosa
• TRUE
• Turbo Air

True Manufacturing is a U.S.-based refrigeration manufacturer recognized for dependable, energy-efficient equipment built for commercial foodservice. Headquartered in O’Fallon, Missouri, True designs and produces all major components in-house to ensure consistent temperature control, durability, and serviceability. Its reach-ins, prep tables, and display coolers are widely used in restaurants, convenience stores, and institutions that require precise cold holding and long-term reliability. With NSF and ENERGY STAR certifications across much of its line, True supports operators with a strong parts network and responsive service resources. Dealers and end users alike trust True for performance proven in real-world kitchen conditions.