Skip to content
Request Quote Check Order Status Financing About Us Contact Us

Sealer Sales HR-MV980ZQ Horizontal Band Sealer with Dry Ink Coding, Vacuum, and Gas Flush, 10mm Seal Width, Right Feed

SKUHR-MV980ZQ BrandSealer Sales
Sealer Sales HR-MV980ZQ Horizontal Band Sealer with Dry Ink Coding, Vacuum, and Gas Flush, 10mm Seal Width, Right Feed

The Sealer Sales HR-MV980ZQ Band Sealer

The Sealer Sales HR-MV980ZQ is a horizontal continuous band sealer with an integrated 1/3-HP nozzle-type vacuum pump, gas-flush capability, tilting seal head, dry-ink coding station, and 10mm seal width. The unit handles vacuum packaging or modified-atmosphere (gas-flush) packaging on a continuous-band line rather than the batch-cycle chamber format. Vacuum and gas flush operate as alternate modes rather than simultaneously.

Nozzle-Type Vacuum with Integrated 1/3 HP Pump

A nozzle inserts into the open mouth of the bag as it enters the conveyor. The integrated 1/3 HP pump evacuates the bag, the nozzle withdraws, and the seal bars close the bag in one continuous motion. The pump is sized to evacuate poly bags up to standard production-bag volumes; for larger bags or higher-vacuum requirements, a chamber sealer is the right tool, but for production-volume oxygen reduction this band-sealer-plus-nozzle configuration is faster per bag.

Gas-Flush Capability for Modified-Atmosphere Packaging

The same nozzle delivers inert gas (typically nitrogen) into the bag instead of evacuating it, replacing the atmosphere inside the bag with a non-reactive fill. This is the standard approach for coffee, snack food, supplement, and electronics packaging where oxygen sensitivity matters but a hard vacuum would crush the product. Vacuum and gas flush are alternate modes; the operator selects one or the other for the run.

Tilting Seal Head for Liquid and Irregular Profiles

The seal head pivots up to 30 degrees, which lets the unit accommodate liquid-filled bags and irregular product profiles without spilling or hanging the bag against the conveyor. Pair the tilt with the vacuum or gas-flush function to do MAP packaging on filled liquid bags without the contents migrating into the seal area.

Constant Direct-Heat Sealing with Cooling and Heating Blocks

The 10mm seal bars run on constant direct heat with paired cooling and heating blocks behind them. The heating block brings the film to seal temperature; the cooling block sets the seal before the bag exits the conveyor. A solid-state digital temperature controller holds the bars at the set point through long production runs.

Motorized Rubber Conveyor with Knurled Pressure Rolls

The motorized rubber conveyor runs at variable speed for film and bag tuning. Knurled pressure rolls above the conveyor adjust independently so the seal pressure compensates for film thickness and bag fill weight. Right-to-left feed direction.

Stainless Steel Construction

Stainless steel housing for daily packaging-room use. Dry-ink coding station on the seal line for lot or date code. The unit is sized for vacuum or gas-flush packaging runs that previously required a chamber sealer batch process, with the throughput advantage of a continuous-band design.

Features & Benefits

  1. Nozzle-type vacuum device with integrated 1/3-HP pump
  2. Gas flush capability for modified-atmosphere packaging
  3. Tilting seal head pivots up to 30 degrees for liquid or irregular bag profiles
  4. Constant direct-heat seal bars with paired cooling and heating blocks
  5. Solid-state digital temperature controller for consistent seal quality
  6. Motorized rubber conveyor with knurled pressure rolls and variable speed control
  7. Dry-ink coding station prints lot or date code onto the seal line
  8. Durable stainless steel housing
  9. Vacuum and gas flush operate as alternate modes (not simultaneously)

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$3,750.00
  • Nozzle-type vacuum device with integrated 1/3-HP pump
  • Gas flush capability for modified-atmosphere packaging
  • Tilting seal head pivots up to 30 degrees for liquid or irregular bag profiles
  • Constant direct-heat seal bars with paired cooling and heating blocks
  • Solid-state digital temperature controller for consistent seal quality
    • See full feature list

    The Sealer Sales HR-MV980ZQ Band Sealer

    The Sealer Sales HR-MV980ZQ is a horizontal continuous band sealer with an integrated 1/3-HP nozzle-type vacuum pump, gas-flush capability, tilting seal head, dry-ink coding station, and 10mm seal width. The unit handles vacuum packaging or modified-atmosphere (gas-flush) packaging on a continuous-band line rather than the batch-cycle chamber format. Vacuum and gas flush operate as alternate modes rather than simultaneously.

    Nozzle-Type Vacuum with Integrated 1/3 HP Pump

    A nozzle inserts into the open mouth of the bag as it enters the conveyor. The integrated 1/3 HP pump evacuates the bag, the nozzle withdraws, and the seal bars close the bag in one continuous motion. The pump is sized to evacuate poly bags up to standard production-bag volumes; for larger bags or higher-vacuum requirements, a chamber sealer is the right tool, but for production-volume oxygen reduction this band-sealer-plus-nozzle configuration is faster per bag.

    Gas-Flush Capability for Modified-Atmosphere Packaging

    The same nozzle delivers inert gas (typically nitrogen) into the bag instead of evacuating it, replacing the atmosphere inside the bag with a non-reactive fill. This is the standard approach for coffee, snack food, supplement, and electronics packaging where oxygen sensitivity matters but a hard vacuum would crush the product. Vacuum and gas flush are alternate modes; the operator selects one or the other for the run.

    Tilting Seal Head for Liquid and Irregular Profiles

    The seal head pivots up to 30 degrees, which lets the unit accommodate liquid-filled bags and irregular product profiles without spilling or hanging the bag against the conveyor. Pair the tilt with the vacuum or gas-flush function to do MAP packaging on filled liquid bags without the contents migrating into the seal area.

    Constant Direct-Heat Sealing with Cooling and Heating Blocks

    The 10mm seal bars run on constant direct heat with paired cooling and heating blocks behind them. The heating block brings the film to seal temperature; the cooling block sets the seal before the bag exits the conveyor. A solid-state digital temperature controller holds the bars at the set point through long production runs.

    Motorized Rubber Conveyor with Knurled Pressure Rolls

    The motorized rubber conveyor runs at variable speed for film and bag tuning. Knurled pressure rolls above the conveyor adjust independently so the seal pressure compensates for film thickness and bag fill weight. Right-to-left feed direction.

    Stainless Steel Construction

    Stainless steel housing for daily packaging-room use. Dry-ink coding station on the seal line for lot or date code. The unit is sized for vacuum or gas-flush packaging runs that previously required a chamber sealer batch process, with the throughput advantage of a continuous-band design.

    Features & Benefits

    1. Nozzle-type vacuum device with integrated 1/3-HP pump
    2. Gas flush capability for modified-atmosphere packaging
    3. Tilting seal head pivots up to 30 degrees for liquid or irregular bag profiles
    4. Constant direct-heat seal bars with paired cooling and heating blocks
    5. Solid-state digital temperature controller for consistent seal quality
    6. Motorized rubber conveyor with knurled pressure rolls and variable speed control
    7. Dry-ink coding station prints lot or date code onto the seal line
    8. Durable stainless steel housing
    9. Vacuum and gas flush operate as alternate modes (not simultaneously)

    Resources & Downloads

    See all from Sealer Sales

    Specifications

    SpecificationDetail
    Power110V / 60Hz
    Vacuum Pump1/3 HP nozzle-type
    Seal Width10 mm
    Temperature RangeUp to 482°F (250°C)
    Feed DirectionRight to left
    ConfigurationHorizontal with tilting head (up to 30 degrees)
    HousingStainless steel

    Manufacturer's Warranty

    • 6 Month

      Labor

    • 6 Month

      Parts

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Sealer Sales HR-MV980ZQ Band Sealer

    About Commercial Band Sealers

    A band sealer closes bags and pouches with a continuously moving heated belt. It runs a steady stream of packages through the seal instead of one bag at a time. That speed makes it the standard tool for lines that bag snacks, coffee, spices, dry goods, hardware, and pharmaceuticals at volume. The belt grips the top of the bag and carries it through heated elements that fuse the seam. The seal then cools, and the machine can add a date code in the same pass.

    These machines come in horizontal and vertical formats. A horizontal unit lays the bag flat on the conveyor, which suits dry and solid products and runs fast for high-volume work. A vertical unit keeps the bag upright so liquids, powders, and granules do not spill while the top seals. Continuous operation, adjustable speed, and inline coding let one machine handle many bag materials. That includes poly, laminate, foil, and paper.

    Every unit in this collection is a commercial band sealer built for industrial packaging lines. Common configurations, what to check before buying, and the questions buyers ask most often follow below.

    Common Types and Configurations

    • Horizontal band sealer: The bag lays flat on the conveyor. Best for dry and solid products and for fast, high-volume sealing.
    • Vertical band sealer: The bag travels upright so liquids, powders, and granular products do not spill while the top seals.
    • Convertible continuous band sealer: Models with a conversion kit switch between horizontal and vertical to cover both product types on one machine.
    • Rotary band sealer and tilt-head models: Specialty feeds for heavier or awkward bags, including rotary support and a tilt head for liquid-filled pouches.
    • Portable models: Compact touchscreen units rated to a lighter duty that seal at the bench or move between stations.
    • Coding and finishing options: Dry ink coding for date and lot numbers, embossing, digital counters, trimmers, and vacuum with gas flush on select models.

    What to Look at Before You Buy

    • Bag orientation: Choose horizontal for dry and solid products, vertical for liquids, powders, and granules.
    • Seal width: Models run from 10mm up to 30mm, with the wider 30mm seal suited to hang-hole retail bags.
    • Throughput: Conveyor speeds reach 0 to 630 inches per minute on full-size units, and 0 to 275 inches per minute on portable units.
    • Bag material and thickness: These machines handle poly, laminate, foil, and paper bags. Match the temperature range to the film you run.
    • Coding and traceability: Dry ink coding and embossing add date codes and lot numbers inline, which matters for food and pharmaceutical packaging.
    • Power: Most units run on standard 110V, and 220V versions are available for higher-demand lines.
    • Feed direction and placement: Left or right feed and counter or floor placement should match how product reaches the operator.

    Frequently Asked Questions

    What Is a Band Sealer?

    A band sealer is a continuous sealing machine that closes bags and pouches with a moving heated belt. The belt grips the top of the bag, carries it through heated elements that fuse the seam, then cools the seal. Because it runs continuously, it seals far faster than a single-cycle bar sealer. Production lines use it to bag products at volume.

    Should I Choose a Horizontal or Vertical Band Sealer?

    Choose a horizontal unit for dry and solid products. The bag lays flat on the conveyor, and horizontal models run faster for high-volume work. Choose a vertical unit when the bag holds liquids, powders, or granules, since the upright position keeps the contents out of the seal. Convertible models switch between both orientations with a conversion kit.

    What Is the Difference Between a Heat Sealer and a Band Sealer?

    A standard heat or bar sealer presses one seal at a time and waits for each cycle to finish. A band sealer runs a continuous heated belt, so bags feed through in a steady stream without stopping. That makes it much faster for production runs, with full-size models reaching 0 to 630 inches per minute. Bar sealers still suit low-volume or occasional sealing.

    Related Categories

    Shop by Brand

    Product Features

    1. Nozzle-type vacuum device with integrated 1/3-HP pump
    2. Gas flush capability for modified-atmosphere packaging
    3. Tilting seal head pivots up to 30 degrees for liquid or irregular bag profiles
    4. Constant direct-heat seal bars with paired cooling and heating blocks
    5. Solid-state digital temperature controller for consistent seal quality
    6. Motorized rubber conveyor with knurled pressure rolls and variable speed control
    7. Dry-ink coding station prints lot or date code onto the seal line
    8. Durable stainless steel housing
    9. Vacuum and gas flush operate as alternate modes (not simultaneously)

    See all from Sealer Sales

    Specifications

    SpecificationDetail
    Power110V / 60Hz
    Vacuum Pump1/3 HP nozzle-type
    Seal Width10 mm
    Temperature RangeUp to 482°F (250°C)
    Feed DirectionRight to left
    ConfigurationHorizontal with tilting head (up to 30 degrees)
    HousingStainless steel

    Manufacturer's Warranty

      1/2 year

      Labor

      1/2 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch