The Excellence Industries BD-27 Chest Freezer
The Excellence Industries BD-27 is a 26.7 cubic foot jumbo storage freezer stretching over 91 inches wide. It is the biggest footprint in the standard-depth BD line, built for commissaries moving serious frozen volume. The thermostat spans -5°F to +25°F, deep enough to hold ice cream and bulk proteins hard-frozen, and the solid lids close over the cold mass to keep energy use flat even in a hot kitchen.
Solid Locking Lids over Deep Bulk Storage
The 2 balanced solid lids each open one section at a time, so pulling a case from one end does not dump the cold out of the whole well. Chest geometry is the most efficient cold storage there is: cold air stays put when the lid opens instead of spilling out the way it does from an upright. The painted steel interior takes case corners and ice scrapers without complaint.
Cold Wall Refrigeration at -5°F to +25°F
An efficient cold wall system cools through the cabinet walls with no interior fan to clog or block, and the adjustable range covers hard-frozen holding at -5°F up to +25°F for general frozen storage. A 1/5 HP compressor on R-290 hydrocarbon refrigerant holds the well at temperature drawing just 2.3 running amps at 115 volts.
A Bottom Drain and Rolling Convenience
The cabinet rides on heavy duty rollers, so it can slide out from a wall for cleaning despite its length. The painted steel interior and white exterior wipe down fast, and optional custom graphics dress the long front panel if the freezer lives anywhere customers can see it.
Built for Back-of-House Duty
This is storage equipment in the plainest sense: no glass to break, no display lighting to service, just insulated steel and a refrigeration circuit sized for years of duty. It complies with 2017 DOE standards for commercial freezers with solid doors, so the utility bill stays as quiet as the compressor.
About Excellence Industries
Excellence Industries is a manufacturer of commercial refrigeration equipment with more than 70 years of industry experience, serving foodservice, retail, beverage, dairy, and ice cream markets. Its product portfolio includes glass door merchandisers, display freezers, storage refrigerators, milk coolers, ice cream cabinets, and custom refrigeration solutions designed for high-traffic commercial environments. The company focuses on efficient refrigeration performance, product visibility, and merchandising features that support retail and foodservice operations. Its refrigeration solutions are used by national restaurant chains, consumer brands, and institutional operators that require dependable performance, tailored configurations, and responsive aftermarket parts and technical support.
Features & Benefits
-
Adds 26.7 cubic feet of rolling frozen storage to kitchens, c-stores, and commissaries without walk-in construction
-
Thermostat spans -5°F for hard-frozen holding up to +25°F for general frozen storage
-
Efficient cold wall refrigeration with no interior fan to clog or block
-
Two balanced solid lids open one section at a time
-
R-290 hydrocarbon refrigerant with a 1/5 HP compressor drawing 2.3 running amps
-
Plugs into a standard 115 volt outlet with no special wiring
-
Rides on rollers for cleaning-day moves
-
Painted steel interior takes case corners and ice scrapers without complaint
-
Deep chest geometry keeps cold in the well when lids open
-
Optional custom graphics for front panels that face customers
-
Complies with 2017 DOE standards for commercial freezers with solid doors
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Excellence Industries BD-27 Chest Freezer
The Excellence Industries BD-27 is a 26.7 cubic foot jumbo storage freezer stretching over 91 inches wide. It is the biggest footprint in the standard-depth BD line, built for commissaries moving serious frozen volume. The thermostat spans -5°F to +25°F, deep enough to hold ice cream and bulk proteins hard-frozen, and the solid lids close over the cold mass to keep energy use flat even in a hot kitchen.
Solid Locking Lids over Deep Bulk Storage
The 2 balanced solid lids each open one section at a time, so pulling a case from one end does not dump the cold out of the whole well. Chest geometry is the most efficient cold storage there is: cold air stays put when the lid opens instead of spilling out the way it does from an upright. The painted steel interior takes case corners and ice scrapers without complaint.
Cold Wall Refrigeration at -5°F to +25°F
An efficient cold wall system cools through the cabinet walls with no interior fan to clog or block, and the adjustable range covers hard-frozen holding at -5°F up to +25°F for general frozen storage. A 1/5 HP compressor on R-290 hydrocarbon refrigerant holds the well at temperature drawing just 2.3 running amps at 115 volts.
A Bottom Drain and Rolling Convenience
The cabinet rides on heavy duty rollers, so it can slide out from a wall for cleaning despite its length. The painted steel interior and white exterior wipe down fast, and optional custom graphics dress the long front panel if the freezer lives anywhere customers can see it.
Built for Back-of-House Duty
This is storage equipment in the plainest sense: no glass to break, no display lighting to service, just insulated steel and a refrigeration circuit sized for years of duty. It complies with 2017 DOE standards for commercial freezers with solid doors, so the utility bill stays as quiet as the compressor.
About Excellence Industries
Excellence Industries is a manufacturer of commercial refrigeration equipment with more than 70 years of industry experience, serving foodservice, retail, beverage, dairy, and ice cream markets. Its product portfolio includes glass door merchandisers, display freezers, storage refrigerators, milk coolers, ice cream cabinets, and custom refrigeration solutions designed for high-traffic commercial environments. The company focuses on efficient refrigeration performance, product visibility, and merchandising features that support retail and foodservice operations. Its refrigeration solutions are used by national restaurant chains, consumer brands, and institutional operators that require dependable performance, tailored configurations, and responsive aftermarket parts and technical support.
Features & Benefits
-
Adds 26.7 cubic feet of rolling frozen storage to kitchens, c-stores, and commissaries without walk-in construction
-
Thermostat spans -5°F for hard-frozen holding up to +25°F for general frozen storage
-
Efficient cold wall refrigeration with no interior fan to clog or block
-
Two balanced solid lids open one section at a time
-
R-290 hydrocarbon refrigerant with a 1/5 HP compressor drawing 2.3 running amps
-
Plugs into a standard 115 volt outlet with no special wiring
-
Rides on rollers for cleaning-day moves
-
Painted steel interior takes case corners and ice scrapers without complaint
-
Deep chest geometry keeps cold in the well when lids open
-
Optional custom graphics for front panels that face customers
-
Complies with 2017 DOE standards for commercial freezers with solid doors
Resources & Downloads
See all from Excellence Industries
Specifications
| Capacity | 26.7 cu. ft. |
| Temperature Range | -5° to +25°F |
| Cooling System | Cold wall refrigeration |
| Refrigerant | R-290 |
| Compressor | 1/5 HP |
| Voltage | 115/60/1 |
| Running Amps | 2.3 |
| Exterior Dimensions (W x D x H) | 91 1/8 x 29 3/4 x 33 1/4 in. |
| Lids | 2 solid |
| Baskets Included | 1 |
| Mobility | Rollers |
| Interior Finish | Painted steel |
| Exterior Finish | White |
| Net Weight | 190 lbs. |
| Shipping Weight | 212 lbs. |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

