Skip to content

IKON ISP-18 18 In. Gas Stock Pot Range, (1) 80,000 BTU Three-Ring Burner, 80,000 BTU, Infinite Controls

SKUISP-18 BrandIKON COOKING

The IKON COOKING ISP-18 Stock Pot Range

The IKON ISP-18 is a single-burner gas stock pot range with one 80,000 BTU concentric three-ring burner and two infinite heat controls. The low-profile design puts the grate surface at just 22.3 inches high, making it purpose-built for the heavy lifting that comes with stock pots, brew kettles, and large sauce pots that would be dangerous to hoist onto a standard 34 to 36 inch range top. At 17.9 inches wide and 25.6 inches deep, it tucks against a wall or under a prep table when not in use, or sits permanently on the line for operations that run stocks, soups, or broths throughout the day. The three concentric burner rings with dual infinite controls let you manage the inner and outer heat zones independently, so you can go from a hard rolling boil to a gentle simmer without moving the pot.

80,000 BTU Concentric Three-Ring Cast Iron Burners with Dual Infinite Controls

Each burner section produces 80,000 BTU through a concentric three-ring design set into a heavy-duty cast iron top grate. The three rings let you spread heat across the full bottom of a large stock pot or kettle, so you get even heating from the center out to the edges instead of a single hot spot in the middle that scorches whatever sits directly above it. Two infinite heat controls per section give you independent adjustment of the inner and outer rings, which means you can run all three rings at full output to bring 15 gallons of water to a boil, then back the outer ring down to a low simmer while keeping the inner ring at medium for a slow reduction. That kind of zone control inside a single burner is something you do not get from a standard single-knob hotplate or range burner. A standing pilot ignition system on each section gives you instant flame every time you turn a knob, with no electrical connection required.

Low-Profile Stainless Steel Cabinet with Storage Area and Crumb Tray

The low work height puts the grate surface at 22.3 inches, which is roughly countertop level and a full 12 to 14 inches lower than a standard range top. When you are lifting a 60-quart stock pot full of soup or a brew kettle loaded with liquid, every inch of height you have to clear matters for both your back and your safety. The lower grate means less lifting and a more stable pour when you tilt or ladle from the pot. The cabinet below the control panel includes a storage area where you can stash extra grates, a drip pan, or small equipment, and a galvanized crumb tray slides out for cleaning. The front and sides are stainless steel for durability and easy wipe-down in a commercial environment. Adjustable stainless steel legs let you level the unit on uneven floors and set it to the exact working height your kitchen needs. Each unit ships with a conversion kit for switching between natural gas and liquid propane, and the 3/4 inch NPT rear gas connection includes a regulator.

The ISP-18 measures 17.9" wide by 25.6" deep by 22.3" high (overall dimensions). Net weight is 101 pounds. Shipping dimensions are 21.2" x 27.5" x 23.6" and shipping weight is 132 pounds. The unit requires a 3/4 inch NPT gas connection with regulator (included) and ships with a conversion kit for switching between natural gas and liquid propane.

Features & Benefits

  1. Low-profile gas stock pot range with (1) 80,000 BTU concentric three-ring cast iron burner, 80,000 BTU total
  2. (2) Infinite heat controls (2 per section) for independent inner/outer ring adjustment
  3. Heavy-duty cast iron top grate
  4. Standing pilot ignition system, one per burner section
  5. Low work height: 22.3" to grate surface
  6. Stainless steel front and sides
  7. Storage area in cabinet below control panel
  8. Galvanized crumb tray, removable
  9. Adjustable stainless steel legs
  10. 3/4" NPT rear gas connection with regulator
  11. Conversion kit included for NG/LP switching
  12. Gas Pressure: NG 4" W.C. / LP 10" W.C.
  13. Overall Dimensions (W x D x H): 17.9" x 25.6" x 22.3"
  14. Net Weight: 101 lbs
  15. Shipping Dimensions: 21.2" x 27.5" x 23.6"
  16. Shipping Weight: 132 lbs

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$670.35
  • Low-profile gas stock pot range with (1) 80,000 BTU concentric three-ring cast iron burner, 80,000 BTU total
  • (2) Infinite heat controls (2 per section) for independent inner/outer ring adjustment
  • Heavy-duty cast iron top grate
  • Standing pilot ignition system, one per burner section
  • Low work height: 22.3" to grate surface
  • See full feature list

    The IKON COOKING ISP-18 Stock Pot Range

    The IKON ISP-18 is a single-burner gas stock pot range with one 80,000 BTU concentric three-ring burner and two infinite heat controls. The low-profile design puts the grate surface at just 22.3 inches high, making it purpose-built for the heavy lifting that comes with stock pots, brew kettles, and large sauce pots that would be dangerous to hoist onto a standard 34 to 36 inch range top. At 17.9 inches wide and 25.6 inches deep, it tucks against a wall or under a prep table when not in use, or sits permanently on the line for operations that run stocks, soups, or broths throughout the day. The three concentric burner rings with dual infinite controls let you manage the inner and outer heat zones independently, so you can go from a hard rolling boil to a gentle simmer without moving the pot.

    80,000 BTU Concentric Three-Ring Cast Iron Burners with Dual Infinite Controls

    Each burner section produces 80,000 BTU through a concentric three-ring design set into a heavy-duty cast iron top grate. The three rings let you spread heat across the full bottom of a large stock pot or kettle, so you get even heating from the center out to the edges instead of a single hot spot in the middle that scorches whatever sits directly above it. Two infinite heat controls per section give you independent adjustment of the inner and outer rings, which means you can run all three rings at full output to bring 15 gallons of water to a boil, then back the outer ring down to a low simmer while keeping the inner ring at medium for a slow reduction. That kind of zone control inside a single burner is something you do not get from a standard single-knob hotplate or range burner. A standing pilot ignition system on each section gives you instant flame every time you turn a knob, with no electrical connection required.

    Low-Profile Stainless Steel Cabinet with Storage Area and Crumb Tray

    The low work height puts the grate surface at 22.3 inches, which is roughly countertop level and a full 12 to 14 inches lower than a standard range top. When you are lifting a 60-quart stock pot full of soup or a brew kettle loaded with liquid, every inch of height you have to clear matters for both your back and your safety. The lower grate means less lifting and a more stable pour when you tilt or ladle from the pot. The cabinet below the control panel includes a storage area where you can stash extra grates, a drip pan, or small equipment, and a galvanized crumb tray slides out for cleaning. The front and sides are stainless steel for durability and easy wipe-down in a commercial environment. Adjustable stainless steel legs let you level the unit on uneven floors and set it to the exact working height your kitchen needs. Each unit ships with a conversion kit for switching between natural gas and liquid propane, and the 3/4 inch NPT rear gas connection includes a regulator.

    The ISP-18 measures 17.9" wide by 25.6" deep by 22.3" high (overall dimensions). Net weight is 101 pounds. Shipping dimensions are 21.2" x 27.5" x 23.6" and shipping weight is 132 pounds. The unit requires a 3/4 inch NPT gas connection with regulator (included) and ships with a conversion kit for switching between natural gas and liquid propane.

    Features & Benefits

    1. Low-profile gas stock pot range with (1) 80,000 BTU concentric three-ring cast iron burner, 80,000 BTU total
    2. (2) Infinite heat controls (2 per section) for independent inner/outer ring adjustment
    3. Heavy-duty cast iron top grate
    4. Standing pilot ignition system, one per burner section
    5. Low work height: 22.3" to grate surface
    6. Stainless steel front and sides
    7. Storage area in cabinet below control panel
    8. Galvanized crumb tray, removable
    9. Adjustable stainless steel legs
    10. 3/4" NPT rear gas connection with regulator
    11. Conversion kit included for NG/LP switching
    12. Gas Pressure: NG 4" W.C. / LP 10" W.C.
    13. Overall Dimensions (W x D x H): 17.9" x 25.6" x 22.3"
    14. Net Weight: 101 lbs
    15. Shipping Dimensions: 21.2" x 27.5" x 23.6"
    16. Shipping Weight: 132 lbs

    Resources & Downloads

    Specifications

    Overall Dimensions (W x D x H)17.9" x 25.6" x 22.3"
    Burners(1) Concentric Three-Ring, Cast Iron, 80,000 BTU Each
    Total BTU80,000
    Controls(2) Infinite Heat Controls (2 Per Section)
    IgnitionStanding Pilot, One Per Burner Section
    GratesHeavy-Duty Cast Iron
    Work Height (to Grate)22.3"
    CabinetStainless Steel Front and Sides
    StorageStorage Area in Cabinet Below Control Panel
    Crumb TrayGalvanized, Removable
    LegsAdjustable Stainless Steel
    Gas Connection3/4" NPT, Rear, with Regulator
    Gas PressureNG: 4" W.C. / LP: 10" W.C.
    Conversion KitIncluded
    Net Weight101 lbs
    Shipping Weight132 lbs
    Shipping Dimensions21.2" x 27.5" x 23.6"

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    Certifications & Approvals

    • CSA Flame
      CSA Flame Certified
    • CSA Sanitation
      CSA Sanitation
    • CSA Star
      CSA Star Certified

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're exited to serve you next! 

    The IKON COOKING ISP-18 Stock Pot Range

    Product Features

    1. Low-profile gas stock pot range with (1) 80,000 BTU concentric three-ring cast iron burner, 80,000 BTU total
    2. (2) Infinite heat controls (2 per section) for independent inner/outer ring adjustment
    3. Heavy-duty cast iron top grate
    4. Standing pilot ignition system, one per burner section
    5. Low work height: 22.3" to grate surface
    6. Stainless steel front and sides
    7. Storage area in cabinet below control panel
    8. Galvanized crumb tray, removable
    9. Adjustable stainless steel legs
    10. 3/4" NPT rear gas connection with regulator
    11. Conversion kit included for NG/LP switching
    12. Gas Pressure: NG 4" W.C. / LP 10" W.C.
    13. Overall Dimensions (W x D x H): 17.9" x 25.6" x 22.3"
    14. Net Weight: 101 lbs
    15. Shipping Dimensions: 21.2" x 27.5" x 23.6"
    16. Shipping Weight: 132 lbs

    Specifications

    Overall Dimensions (W x D x H)17.9" x 25.6" x 22.3"
    Burners(1) Concentric Three-Ring, Cast Iron, 80,000 BTU Each
    Total BTU80,000
    Controls(2) Infinite Heat Controls (2 Per Section)
    IgnitionStanding Pilot, One Per Burner Section
    GratesHeavy-Duty Cast Iron
    Work Height (to Grate)22.3"
    CabinetStainless Steel Front and Sides
    StorageStorage Area in Cabinet Below Control Panel
    Crumb TrayGalvanized, Removable
    LegsAdjustable Stainless Steel
    Gas Connection3/4" NPT, Rear, with Regulator
    Gas PressureNG: 4" W.C. / LP: 10" W.C.
    Conversion KitIncluded
    Net Weight101 lbs
    Shipping Weight132 lbs
    Shipping Dimensions21.2" x 27.5" x 23.6"

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch