The IKON COOKING ISP-18-2 Stock Pot Range
The IKON ISP-18-2 is a double-burner gas stock pot range with two 80,000 BTU concentric three-ring burners producing 160,000 BTU total. Each burner section has its own pair of infinite heat controls, giving you four independent adjustments across two burner stations. The low-profile cabinet stands just 22.3 inches to the grate, keeping heavy pots close to the floor so your cooks spend less energy lifting and have better control when pouring or ladling. At 17.9 inches wide and 50.2 inches deep, the double-burner model runs two stock pots, kettles, or large sauce pots at the same time, which is essential for kitchens making multiple stocks, soups, or braises simultaneously. Each burner's three concentric rings and dual controls let you dial the inner and outer zones independently on both stations.
80,000 BTU Concentric Three-Ring Cast Iron Burners with Dual Infinite Controls
Each burner section produces 80,000 BTU through a concentric three-ring design set into a heavy-duty cast iron top grate. The three rings let you spread heat across the full bottom of a large stock pot or kettle, so you get even heating from the center out to the edges instead of a single hot spot in the middle that scorches whatever sits directly above it. Two infinite heat controls per section give you independent adjustment of the inner and outer rings, which means you can run all three rings at full output to bring 15 gallons of water to a boil, then back the outer ring down to a low simmer while keeping the inner ring at medium for a slow reduction. That kind of zone control inside a single burner is something you do not get from a standard single-knob hotplate or range burner. A standing pilot ignition system on each section gives you instant flame every time you turn a knob, with no electrical connection required.
Low-Profile Stainless Steel Cabinet with Storage Area and Crumb Tray
The low work height puts the grate surface at 22.3 inches, which is roughly countertop level and a full 12 to 14 inches lower than a standard range top. When you are lifting a 60-quart stock pot full of soup or a brew kettle loaded with liquid, every inch of height you have to clear matters for both your back and your safety. The lower grate means less lifting and a more stable pour when you tilt or ladle from the pot. The cabinet below the control panel includes a storage area where you can stash extra grates, a drip pan, or small equipment, and a galvanized crumb tray slides out for cleaning. The front and sides are stainless steel for durability and easy wipe-down in a commercial environment. Adjustable stainless steel legs let you level the unit on uneven floors and set it to the exact working height your kitchen needs. Each unit ships with a conversion kit for switching between natural gas and liquid propane, and the 3/4 inch NPT rear gas connection includes a regulator.
The ISP-18-2 measures 17.9" wide by 50.2" deep by 22.3" high (overall dimensions). Net weight is 178 pounds. Shipping dimensions are 21.2" x 56.6" x 23.6" and shipping weight is 222 pounds. The unit requires a 3/4 inch NPT gas connection with regulator (included) and ships with a conversion kit for switching between natural gas and liquid propane.
Features & Benefits
-
Low-profile gas stock pot range with (2) 80,000 BTU concentric three-ring cast iron burners, 160,000 BTU total
-
(4) Infinite heat controls (2 per sections) for independent inner/outer ring adjustment
-
Heavy-duty cast iron top grates
-
Standing pilot ignition system, one per burner section
-
Low work height: 22.3" to grate surface
-
Stainless steel front and sides
-
Storage area in cabinet below control panel
-
Galvanized crumb tray, removable
-
Adjustable stainless steel legs
-
3/4" NPT rear gas connection with regulator
-
Conversion kit included for NG/LP switching
-
Gas Pressure: NG 4" W.C. / LP 10" W.C.
-
Overall Dimensions (W x D x H): 17.9" x 50.2" x 22.3"
-
Net Weight: 178 lbs
-
Shipping Dimensions: 21.2" x 56.6" x 23.6"
-
Shipping Weight: 222 lbs
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The IKON COOKING ISP-18-2 Stock Pot Range
The IKON ISP-18-2 is a double-burner gas stock pot range with two 80,000 BTU concentric three-ring burners producing 160,000 BTU total. Each burner section has its own pair of infinite heat controls, giving you four independent adjustments across two burner stations. The low-profile cabinet stands just 22.3 inches to the grate, keeping heavy pots close to the floor so your cooks spend less energy lifting and have better control when pouring or ladling. At 17.9 inches wide and 50.2 inches deep, the double-burner model runs two stock pots, kettles, or large sauce pots at the same time, which is essential for kitchens making multiple stocks, soups, or braises simultaneously. Each burner's three concentric rings and dual controls let you dial the inner and outer zones independently on both stations.
80,000 BTU Concentric Three-Ring Cast Iron Burners with Dual Infinite Controls
Each burner section produces 80,000 BTU through a concentric three-ring design set into a heavy-duty cast iron top grate. The three rings let you spread heat across the full bottom of a large stock pot or kettle, so you get even heating from the center out to the edges instead of a single hot spot in the middle that scorches whatever sits directly above it. Two infinite heat controls per section give you independent adjustment of the inner and outer rings, which means you can run all three rings at full output to bring 15 gallons of water to a boil, then back the outer ring down to a low simmer while keeping the inner ring at medium for a slow reduction. That kind of zone control inside a single burner is something you do not get from a standard single-knob hotplate or range burner. A standing pilot ignition system on each section gives you instant flame every time you turn a knob, with no electrical connection required.
Low-Profile Stainless Steel Cabinet with Storage Area and Crumb Tray
The low work height puts the grate surface at 22.3 inches, which is roughly countertop level and a full 12 to 14 inches lower than a standard range top. When you are lifting a 60-quart stock pot full of soup or a brew kettle loaded with liquid, every inch of height you have to clear matters for both your back and your safety. The lower grate means less lifting and a more stable pour when you tilt or ladle from the pot. The cabinet below the control panel includes a storage area where you can stash extra grates, a drip pan, or small equipment, and a galvanized crumb tray slides out for cleaning. The front and sides are stainless steel for durability and easy wipe-down in a commercial environment. Adjustable stainless steel legs let you level the unit on uneven floors and set it to the exact working height your kitchen needs. Each unit ships with a conversion kit for switching between natural gas and liquid propane, and the 3/4 inch NPT rear gas connection includes a regulator.
The ISP-18-2 measures 17.9" wide by 50.2" deep by 22.3" high (overall dimensions). Net weight is 178 pounds. Shipping dimensions are 21.2" x 56.6" x 23.6" and shipping weight is 222 pounds. The unit requires a 3/4 inch NPT gas connection with regulator (included) and ships with a conversion kit for switching between natural gas and liquid propane.
Features & Benefits
-
Low-profile gas stock pot range with (2) 80,000 BTU concentric three-ring cast iron burners, 160,000 BTU total
-
(4) Infinite heat controls (2 per sections) for independent inner/outer ring adjustment
-
Heavy-duty cast iron top grates
-
Standing pilot ignition system, one per burner section
-
Low work height: 22.3" to grate surface
-
Stainless steel front and sides
-
Storage area in cabinet below control panel
-
Galvanized crumb tray, removable
-
Adjustable stainless steel legs
-
3/4" NPT rear gas connection with regulator
-
Conversion kit included for NG/LP switching
-
Gas Pressure: NG 4" W.C. / LP 10" W.C.
-
Overall Dimensions (W x D x H): 17.9" x 50.2" x 22.3"
-
Net Weight: 178 lbs
-
Shipping Dimensions: 21.2" x 56.6" x 23.6"
-
Shipping Weight: 222 lbs
Resources & Downloads
Specifications
| Overall Dimensions (W x D x H) | 17.9" x 50.2" x 22.3" |
| Burners | (2) Concentric Three-Ring, Cast Iron, 80,000 BTU Each |
| Total BTU | 160,000 |
| Controls | (4) Infinite Heat Controls (2 Per Sections) |
| Ignition | Standing Pilot, One Per Burner Section |
| Grates | Heavy-Duty Cast Iron |
| Work Height (to Grate) | 22.3" |
| Cabinet | Stainless Steel Front and Sides |
| Storage | Storage Area in Cabinet Below Control Panel |
| Crumb Tray | Galvanized, Removable |
| Legs | Adjustable Stainless Steel |
| Gas Connection | 3/4" NPT, Rear, with Regulator |
| Gas Pressure | NG: 4" W.C. / LP: 10" W.C. |
| Conversion Kit | Included |
| Net Weight | 178 lbs |
| Shipping Weight | 222 lbs |
| Shipping Dimensions | 21.2" x 56.6" x 23.6" |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
CSA Flame Certified
-
CSA Sanitation
-
CSA Star Certified

