The IKON IT28F Reach-In Freezer
The IKON IT28F is a single-door reach-in freezer with 23 cubic feet of capacity and a top-mount compressor holding the interior between 0 and -10 degrees Fahrenheit. The top-mount design keeps the compressor away from the floor where mop water and grease can reduce condenser efficiency, which matters more on a freezer where the compressor runs harder to maintain sub-zero temperatures. LED interior lighting lets you identify frozen inventory without reaching in and feeling around, and factory-installed heating elements in the door frame prevent the condensation buildup that causes ice around gaskets. A field-reversible locking door and three adjustable shelves accommodate full-size sheet pans in a 26.8-inch-wide footprint.
Top-Mount R290 Compressor with Automatic Defrost
The compressor sits on top of the cabinet, which keeps the mechanical components away from floor-level grease, debris, and mop water that can clog condensers on bottom-mount units. This placement also makes the compressor easier to access for cleaning and maintenance since your technician does not have to kneel or pull the unit away from the wall. R290 natural refrigerant paired with CFC-free foam insulation delivers efficient cooling while meeting current environmental standards. The condensate heating element is built directly into the condensate pan, so excess water evaporates on its own without drip trays or manual emptying. An electronic thermostat with a digital LED display lets you check and adjust the cabinet temperature at a glance without opening the door.
Commercial-Grade Stainless Steel Interior and Exterior
The exterior panels are 430 stainless steel, which holds up to the daily contact of carts, sheet pans, and kitchen traffic. The interior is 304 stainless steel, the higher-grade alloy that resists corrosion from acidic foods, cleaning chemicals, and the constant moisture cycling inside a commercial cooler or freezer. Self-closing doors stay shut on their own but remain open when swung to 90 degrees, giving you both hands free to load or unload full sheet pans. Magnetic gaskets snap in and out without tools, so replacing a worn gasket takes minutes instead of a service call. Every unit rides on four 4-inch swivel casters with two front locking wheels for easy repositioning and stable daily operation.
The IT28F measures 26.8 inches wide by 32.7 inches deep by 82.3 inches high, with interior dimensions of 22.2 by 27.6 by 50.2 inches. The 5/8 HP top-mount compressor draws 11 amps on 115V/60/1 power with a NEMA 5-15P plug and 10-foot cord. Shipping weight is 329 pounds.
About IKON
IKON is a commercial refrigeration line built for foodservice operations that balance back-of-house prep with front-of-house visibility. The range covers reach-ins, glass door merchandisers, prep tables, undercounters, and bar units, giving operators flexibility across kitchen and service areas. Units are constructed with stainless steel and use R290 refrigerant, with digital temperature controls that are easy to read and adjust during service. Bottom-mounted refrigeration is common across the line, which helps in hotter kitchen environments and simplifies routine cleaning. IKON is often used in restaurants, convenience stores, and bars that need consistent performance across mixed refrigeration formats.
Features & Benefits
-
Reach-in freezer with top-mount self-contained R290 refrigeration, (1) solid stainless steel door
-
Capacity: 23 cu. ft.
-
Temperature Range: 0 to -10°F (-17 to -23°C)
-
Electronic thermostat with digital LED temperature display
-
Automatic defrost
-
(3) Adjustable heavy-duty epoxy coated wire shelves, 3 per door
-
Accommodates full-size sheet pans
-
LED interior lighting
-
Field reversible locking door with stainless steel handle
-
Self-closing doors, remain open at 90 degrees
-
Magnetic gasket replaceable without tools
-
Factory-installed heated door frame to eliminate condensation
-
R290 natural refrigerant with CFC-free foam insulation
-
Compressor: 5/8 HP, top-mounted
-
Condensate heating element built into condensate pan
-
Exterior: 430 stainless steel
-
Interior: 304 stainless steel
-
(4) 4" swivel casters, (2) front locking
-
Exterior Dimensions (W x D x H): 26.8" x 32.7" x 82.3"
-
Interior Dimensions (W x D x H): 22.2" x 27.6" x 50.2"
-
115/60/1, NEMA 5-15P, 10 ft. cord
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The IKON IT28F Reach-In Freezer
The IKON IT28F is a single-door reach-in freezer with 23 cubic feet of capacity and a top-mount compressor holding the interior between 0 and -10 degrees Fahrenheit. The top-mount design keeps the compressor away from the floor where mop water and grease can reduce condenser efficiency, which matters more on a freezer where the compressor runs harder to maintain sub-zero temperatures. LED interior lighting lets you identify frozen inventory without reaching in and feeling around, and factory-installed heating elements in the door frame prevent the condensation buildup that causes ice around gaskets. A field-reversible locking door and three adjustable shelves accommodate full-size sheet pans in a 26.8-inch-wide footprint.
Top-Mount R290 Compressor with Automatic Defrost
The compressor sits on top of the cabinet, which keeps the mechanical components away from floor-level grease, debris, and mop water that can clog condensers on bottom-mount units. This placement also makes the compressor easier to access for cleaning and maintenance since your technician does not have to kneel or pull the unit away from the wall. R290 natural refrigerant paired with CFC-free foam insulation delivers efficient cooling while meeting current environmental standards. The condensate heating element is built directly into the condensate pan, so excess water evaporates on its own without drip trays or manual emptying. An electronic thermostat with a digital LED display lets you check and adjust the cabinet temperature at a glance without opening the door.
Commercial-Grade Stainless Steel Interior and Exterior
The exterior panels are 430 stainless steel, which holds up to the daily contact of carts, sheet pans, and kitchen traffic. The interior is 304 stainless steel, the higher-grade alloy that resists corrosion from acidic foods, cleaning chemicals, and the constant moisture cycling inside a commercial cooler or freezer. Self-closing doors stay shut on their own but remain open when swung to 90 degrees, giving you both hands free to load or unload full sheet pans. Magnetic gaskets snap in and out without tools, so replacing a worn gasket takes minutes instead of a service call. Every unit rides on four 4-inch swivel casters with two front locking wheels for easy repositioning and stable daily operation.
The IT28F measures 26.8 inches wide by 32.7 inches deep by 82.3 inches high, with interior dimensions of 22.2 by 27.6 by 50.2 inches. The 5/8 HP top-mount compressor draws 11 amps on 115V/60/1 power with a NEMA 5-15P plug and 10-foot cord. Shipping weight is 329 pounds.
About IKON
IKON is a commercial refrigeration line built for foodservice operations that balance back-of-house prep with front-of-house visibility. The range covers reach-ins, glass door merchandisers, prep tables, undercounters, and bar units, giving operators flexibility across kitchen and service areas. Units are constructed with stainless steel and use R290 refrigerant, with digital temperature controls that are easy to read and adjust during service. Bottom-mounted refrigeration is common across the line, which helps in hotter kitchen environments and simplifies routine cleaning. IKON is often used in restaurants, convenience stores, and bars that need consistent performance across mixed refrigeration formats.
Features & Benefits
-
Reach-in freezer with top-mount self-contained R290 refrigeration, (1) solid stainless steel door
-
Capacity: 23 cu. ft.
-
Temperature Range: 0 to -10°F (-17 to -23°C)
-
Electronic thermostat with digital LED temperature display
-
Automatic defrost
-
(3) Adjustable heavy-duty epoxy coated wire shelves, 3 per door
-
Accommodates full-size sheet pans
-
LED interior lighting
-
Field reversible locking door with stainless steel handle
-
Self-closing doors, remain open at 90 degrees
-
Magnetic gasket replaceable without tools
-
Factory-installed heated door frame to eliminate condensation
-
R290 natural refrigerant with CFC-free foam insulation
-
Compressor: 5/8 HP, top-mounted
-
Condensate heating element built into condensate pan
-
Exterior: 430 stainless steel
-
Interior: 304 stainless steel
-
(4) 4" swivel casters, (2) front locking
-
Exterior Dimensions (W x D x H): 26.8" x 32.7" x 82.3"
-
Interior Dimensions (W x D x H): 22.2" x 27.6" x 50.2"
-
115/60/1, NEMA 5-15P, 10 ft. cord
Resources & Downloads
See all from IKON
Specifications
| Overall Dimensions (W x D x H) | 26.8" x 32.7" x 82.3" |
| Interior Dimensions (W x D x H) | 22.2" x 27.6" x 50.2" |
| Capacity | 23 cu. ft. |
| Temperature Range | 0 to -10°F (-17 to -23°C) |
| Temperature Control | Electronic Thermostat with Digital LED Display |
| Defrost | Automatic |
| Doors | (1) Solid Stainless Steel Door |
| Door Swing | Field Reversible |
| Shelves | (3) Adjustable Heavy-Duty Epoxy Coated Wire, 3 Per Door |
| Interior Lighting | LED |
| Refrigerant | R290 Natural |
| Insulation | CFC-Free Foam |
| Compressor | 5/8 HP, Top-Mounted |
| Condensate System | Heating Element Built Into Condensate Pan |
| Door Frame | Factory-Installed Heating Element |
| Exterior Material | 430 Stainless Steel |
| Interior Material | 304 Stainless Steel |
| Door Closure | Self-Closing, Remain Open at 90° |
| Gasket | Magnetic, Replaceable Without Tools |
| Door Lock | Yes |
| Casters | (4) 4" Swivel, (2) Front Locking |
| Rated Current | 11A |
| Voltage | 115/60/1 |
| NEMA Plug | 5-15P |
| Cord Length | 10 ft. |
| Shipping Weight | 329 lbs |
| Ambient Operating Range | 40-90°F |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
3 Year
Compressor (Parts Only)
Certifications & Approvals
-
ETL Sanitation

