The Migali C-HCT34 Countertop Heated Display Case
The Migali C-HCT34 is a 34-inch heated counter-top display case sized for grab-and-go food stations, hotel breakfast lines, c-stores, and any operation that holds wrapped hot items above 150°F under glass. The 5.6 cu ft cabinet maintains 86°F to 194°F with a removable water pan underneath that adds humidity to keep biscuits soft, sandwiches from drying out, and pastries from cracking. Three cantilever gray epoxy-plated shelves give you full vertical merchandising, and the rear-door-only configuration keeps the customer-facing front sealed for premium presentation, ideal for grab-and-go presets where customers don't reach in.
Heated Holding from 86°F to 194°F
The dial temperature controller with mechanical read-out lets you tune to whatever temperature your menu requires. 145°F for biscuits and pastries, 160°F for fried chicken, 180°F+ for hot soup containers. The 86°F low end keeps proofed dough warm and sticky buns soft without baking them further; the 194°F high end matches state foodservice hot-hold rules. The removable water pan in the floor of the case lets you pull the pan to refill or wash it without disassembling anything, and the humidity it generates is the difference between a soft pretzel that stays soft and one that shellacs over by lunch service.
Glass on Three Sides Plus the Top with LED Light Box
Three-sided glass (front, two sides, top) gives the customer four merchandising views into the case, framed by black-trimmed glass-covered side panels. Sliding glass doors at the rear let the operator restock without breaking the customer-facing display An LED display light box with a food railing on either side runs along the top to brighten the merchandise without adding heat above what the heater is already producing. Stainless interior with rounded corners wipes down clean and the glass front is double-paned tempered for safety.
Counter-Top Footprint with Pre-Installed Feet
Exterior is 33.5 inches wide and 19 inches deep, so the case sits cleanly on a standard counter or display island. Pre-installed feet let you place and level the unit on uneven counter surfaces. The unit plugs into a standard 115V outlet at 12.6 amps (1500 W). Three cantilever gray epoxy-plated shelves are included.
About Migali
Migali Industries has been manufacturing commercial refrigeration equipment for over 60 years, starting from a modest garage in South Philadelphia. What began with metal kick-plates and custom stainless cabinetry eventually evolved into a full line of foodservice refrigeration. Still family owned, Migali is known for its steady commitment to reliable products and practical innovation. The Competitor Series reflects this approach—clean design, thoughtful features, and solid components at a fair price. With roots in craftsmanship and a focus on long-term customer success, Migali continues to support foodservice professionals across the globe with dependable equipment and consistent service.
Features & Benefits
-
34-inch heated counter-top display case for grab-and-go food, hotel breakfast, and c-store hot-hold
-
5.6 cu ft total (160 L) capacity
-
Temperature range: 86°F to 194°F
-
Dial temperature controller with mechanical read-out
-
Removable water pan in floor of case for added humidity
-
Three cantilever gray epoxy-plated shelves
-
Double-pane tempered straight glass front
-
Glass on front, both sides, and top (four merchandising views)
-
Sliding glass doors at the rear
-
LED display light box with food railing along the top
-
12.6 amps (1500 W), 115V Nema 5-15P plug
-
All stainless steel front exterior and stainless interior
-
Glass-covered black side panels
-
Pre-installed feet for counter-top placement
-
Net weight 94 lbs / packaged weight 98 lbs
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Migali C-HCT34 Countertop Heated Display Case
The Migali C-HCT34 is a 34-inch heated counter-top display case sized for grab-and-go food stations, hotel breakfast lines, c-stores, and any operation that holds wrapped hot items above 150°F under glass. The 5.6 cu ft cabinet maintains 86°F to 194°F with a removable water pan underneath that adds humidity to keep biscuits soft, sandwiches from drying out, and pastries from cracking. Three cantilever gray epoxy-plated shelves give you full vertical merchandising, and the rear-door-only configuration keeps the customer-facing front sealed for premium presentation, ideal for grab-and-go presets where customers don't reach in.
Heated Holding from 86°F to 194°F
The dial temperature controller with mechanical read-out lets you tune to whatever temperature your menu requires. 145°F for biscuits and pastries, 160°F for fried chicken, 180°F+ for hot soup containers. The 86°F low end keeps proofed dough warm and sticky buns soft without baking them further; the 194°F high end matches state foodservice hot-hold rules. The removable water pan in the floor of the case lets you pull the pan to refill or wash it without disassembling anything, and the humidity it generates is the difference between a soft pretzel that stays soft and one that shellacs over by lunch service.
Glass on Three Sides Plus the Top with LED Light Box
Three-sided glass (front, two sides, top) gives the customer four merchandising views into the case, framed by black-trimmed glass-covered side panels. Sliding glass doors at the rear let the operator restock without breaking the customer-facing display An LED display light box with a food railing on either side runs along the top to brighten the merchandise without adding heat above what the heater is already producing. Stainless interior with rounded corners wipes down clean and the glass front is double-paned tempered for safety.
Counter-Top Footprint with Pre-Installed Feet
Exterior is 33.5 inches wide and 19 inches deep, so the case sits cleanly on a standard counter or display island. Pre-installed feet let you place and level the unit on uneven counter surfaces. The unit plugs into a standard 115V outlet at 12.6 amps (1500 W). Three cantilever gray epoxy-plated shelves are included.
About Migali
Migali Industries has been manufacturing commercial refrigeration equipment for over 60 years, starting from a modest garage in South Philadelphia. What began with metal kick-plates and custom stainless cabinetry eventually evolved into a full line of foodservice refrigeration. Still family owned, Migali is known for its steady commitment to reliable products and practical innovation. The Competitor Series reflects this approach—clean design, thoughtful features, and solid components at a fair price. With roots in craftsmanship and a focus on long-term customer success, Migali continues to support foodservice professionals across the globe with dependable equipment and consistent service.
Features & Benefits
-
34-inch heated counter-top display case for grab-and-go food, hotel breakfast, and c-store hot-hold
-
5.6 cu ft total (160 L) capacity
-
Temperature range: 86°F to 194°F
-
Dial temperature controller with mechanical read-out
-
Removable water pan in floor of case for added humidity
-
Three cantilever gray epoxy-plated shelves
-
Double-pane tempered straight glass front
-
Glass on front, both sides, and top (four merchandising views)
-
Sliding glass doors at the rear
-
LED display light box with food railing along the top
-
12.6 amps (1500 W), 115V Nema 5-15P plug
-
All stainless steel front exterior and stainless interior
-
Glass-covered black side panels
-
Pre-installed feet for counter-top placement
-
Net weight 94 lbs / packaged weight 98 lbs
Resources & Downloads
See all from Migali
Specifications
| Configuration | 34" heated counter-top display case |
| Total Capacity | 5.6 cu ft (160 L) |
| Temperature Range | 86°F to 194°F |
| Heat Source | Electric heating element with humidity from removable water pan |
| Temperature Controller | Dial with mechanical read-out |
| Shelves | 3 cantilever, gray epoxy-plated |
| Glass | Double-pane tempered straight, on front + both sides + top |
| Door Configuration | Rear sliding only |
| Lighting | LED display light box with food railing |
| Voltage | 115V / 60Hz / 1 Phase |
| Amps | 12.6 |
| Plug Type | Nema 5-15P |
| Exterior Finish | Stainless steel front, glass-covered black sides |
| Interior Finish | Stainless steel |
| Mobility | Pre-installed feet for counter-top placement |
| Exterior Dimensions (W x D x H) | 33.7 x 23 x 27 in. |
| Interior Dimensions (W x D x H) | 33.1 x 16.9 x 16.9 in. |
| Packing Dimensions (W x D x H) | 36.1 x 21.7 x 28.4 in. |
| Net Weight | 94 lbs. |
| Packaged Weight | 98 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

