The Omcan 46648 Steam Table
The Omcan FW-CN-0005-FH is the largest unit in this series at 72 inches wide, with 5 full-size open well positions, an adjustable stainless steel undershelf, and a removable polyethylene cutting board. Five wells give you enough capacity for a complete hot food spread at banquet halls, large cafeterias, and high-volume catering events. Each well operates on its own independent infinite control, so you can manage five different temperature zones from one table without compromise.
Independent Infinite Controls with Individual Stainless Steel Heating Elements
Each of the 5 wells has its own infinite control knob and dedicated stainless steel heating element, so you can set each well to a different temperature independently. Infinite controls give you a smooth range of heat output rather than fixed steps, which matters when you are holding delicate sauces that break if they get too hot or thick soups that need higher heat to stay at safe serving temperature. The stainless steel heating elements resist corrosion from the water bath and clean up faster than exposed coil elements. At 5,000W total on a 240V single-phase circuit drawing 20.8A, the table brings all 5 wells to operating temperature quickly even during a cold start before service.
Stainless Steel Construction with Undershelf and Polyethylene Cutting Board
The entire frame, well housing, and legs are stainless steel, which holds up to daily use in commercial kitchens where steam tables get bumped, splashed, and wiped down multiple times per shift. The adjustable undershelf (69.7" x 18" x 2") provides storage right where you need it for backup pans, serving utensils, and extra food containers so your buffet line stays organized during service. The removable polyethylene cutting board sits on top of the unit and gives you a prep surface for slicing bread, portioning desserts, or staging plates without needing a separate table next to the steam table. Adjustable stainless steel feet let you level the unit on uneven floors. Pans and spillage pans are sold separately, so you can choose the depth and configuration that fits your menu. Spillage pans (item 80907) are required for wet well operation.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Holds a complete 5-dish hot food spread for banquet halls, large cafeterias, and hotel buffet lines
-
5 full-size open well positions (20.78" x 12.8" x 6" pans) handle entrees, sides, sauces, and soups
-
5 independent infinite controls with individual heating elements let you dial each well separately
-
Reaches approximately 212°F for holding everything from carved meats to delicate sauces
-
Open well design supports both wet and dry operation for maximum flexibility
-
Removable polyethylene cutting board adds carving and prep space along the front
-
Adjustable stainless steel undershelf stores backup pans and serving utensils below
-
5,000W total power with adjustable stainless steel feet for stable, level positioning
-
Spillage pans for wet operations available separately (item 80907)
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Holds a complete 5-dish hot food spread for banquet halls, large cafeterias, and hotel buffet lines
5 full-size open well positions (20.78" x 12.8" x 6" pans) handle entrees, sides, sauces, and soups
5 independent infinite controls with individual heating elements let you dial each well separately
Reaches approximately 212°F for holding everything from carved meats to delicate sauces
Open well design supports both wet and dry operation for maximum flexibility
The Omcan 46648 Steam Table
The Omcan FW-CN-0005-FH is the largest unit in this series at 72 inches wide, with 5 full-size open well positions, an adjustable stainless steel undershelf, and a removable polyethylene cutting board. Five wells give you enough capacity for a complete hot food spread at banquet halls, large cafeterias, and high-volume catering events. Each well operates on its own independent infinite control, so you can manage five different temperature zones from one table without compromise.
Independent Infinite Controls with Individual Stainless Steel Heating Elements
Each of the 5 wells has its own infinite control knob and dedicated stainless steel heating element, so you can set each well to a different temperature independently. Infinite controls give you a smooth range of heat output rather than fixed steps, which matters when you are holding delicate sauces that break if they get too hot or thick soups that need higher heat to stay at safe serving temperature. The stainless steel heating elements resist corrosion from the water bath and clean up faster than exposed coil elements. At 5,000W total on a 240V single-phase circuit drawing 20.8A, the table brings all 5 wells to operating temperature quickly even during a cold start before service.
Stainless Steel Construction with Undershelf and Polyethylene Cutting Board
The entire frame, well housing, and legs are stainless steel, which holds up to daily use in commercial kitchens where steam tables get bumped, splashed, and wiped down multiple times per shift. The adjustable undershelf (69.7" x 18" x 2") provides storage right where you need it for backup pans, serving utensils, and extra food containers so your buffet line stays organized during service. The removable polyethylene cutting board sits on top of the unit and gives you a prep surface for slicing bread, portioning desserts, or staging plates without needing a separate table next to the steam table. Adjustable stainless steel feet let you level the unit on uneven floors. Pans and spillage pans are sold separately, so you can choose the depth and configuration that fits your menu. Spillage pans (item 80907) are required for wet well operation.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Holds a complete 5-dish hot food spread for banquet halls, large cafeterias, and hotel buffet lines
-
5 full-size open well positions (20.78" x 12.8" x 6" pans) handle entrees, sides, sauces, and soups
-
5 independent infinite controls with individual heating elements let you dial each well separately
-
Reaches approximately 212°F for holding everything from carved meats to delicate sauces
-
Open well design supports both wet and dry operation for maximum flexibility
-
Removable polyethylene cutting board adds carving and prep space along the front
-
Adjustable stainless steel undershelf stores backup pans and serving utensils below
-
5,000W total power with adjustable stainless steel feet for stable, level positioning
-
Spillage pans for wet operations available separately (item 80907)
Resources & Downloads
See all from Omcan
Specifications
| Number of Pans | 5 (not included) |
| Recommended Pan Size | 20.78" x 12.8" x 6" |
| Maximum Temperature | Approximately 212°F |
| Controls | 5 independent infinite controls |
| Heating Elements | Stainless steel, individual per well |
| Operation Type | Open well (wet or dry) |
| Material | Stainless Steel |
| Cutting Board Material | Polyethylene (removable) |
| Undershelf | Adjustable stainless steel, 69.7" x 18" x 2" |
| Feet | Adjustable stainless steel |
| Rated Power | 5,000W |
| Rated Current | 20.8A |
| Electrical | 240V / 60Hz / 1Ph |
| Overall Dimensions (W x D x H) | 72" x 30" x 34" |
| Shipping Dimensions (W x D x H) | 75" x 25" x 20" |
| Net Weight | 150 lb |
| Gross Weight | 194 lb |
| Spillage Pan | Item 80907 (sold separately, required for wet operation) |
| Plug Type | NEMA L6-30P |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Holds a complete 5-dish hot food spread for banquet halls, large cafeterias, and hotel buffet lines