Sealer Sales HR-MV980ZQ Horizontal Band Sealer with Dry Ink Coding, Vacuum, and Gas Flush, 10mm Seal Width, Right Feed

The Sealer Sales HR-MV980ZQ is a horizontal continuous band sealer with an integrated 1/3-HP nozzle-type vacuum pump, gas-flush capability, tilting seal head, dry-ink coding station, and 10mm seal width. The unit handles vacuum packaging or modified-atmosphere (gas-flush) packaging on a continuous-band line rather than the batch-cycle chamber format. Vacuum and gas flush operate as alternate modes rather than simultaneously.

Nozzle-Type Vacuum with Integrated 1/3 HP Pump

A nozzle inserts into the open mouth of the bag as it enters the conveyor. The integrated 1/3 HP pump evacuates the bag, the nozzle withdraws, and the seal bars close the bag in one continuous motion. The pump is sized to evacuate poly bags up to standard production-bag volumes; for larger bags or higher-vacuum requirements, a chamber sealer is the right tool, but for production-volume oxygen reduction this band-sealer-plus-nozzle configuration is faster per bag.

Gas-Flush Capability for Modified-Atmosphere Packaging

The same nozzle delivers inert gas (typically nitrogen) into the bag instead of evacuating it, replacing the atmosphere inside the bag with a non-reactive fill. This is the standard approach for coffee, snack food, supplement, and electronics packaging where oxygen sensitivity matters but a hard vacuum would crush the product. Vacuum and gas flush are alternate modes; the operator selects one or the other for the run.

Tilting Seal Head for Liquid and Irregular Profiles

The seal head pivots up to 30 degrees, which lets the unit accommodate liquid-filled bags and irregular product profiles without spilling or hanging the bag against the conveyor. Pair the tilt with the vacuum or gas-flush function to do MAP packaging on filled liquid bags without the contents migrating into the seal area.

Constant Direct-Heat Sealing with Cooling and Heating Blocks

The 10mm seal bars run on constant direct heat with paired cooling and heating blocks behind them. The heating block brings the film to seal temperature; the cooling block sets the seal before the bag exits the conveyor. A solid-state digital temperature controller holds the bars at the set point through long production runs.

Motorized Rubber Conveyor with Knurled Pressure Rolls

The motorized rubber conveyor runs at variable speed for film and bag tuning. Knurled pressure rolls above the conveyor adjust independently so the seal pressure compensates for film thickness and bag fill weight. Right-to-left feed direction.

Stainless Steel Construction

Stainless steel housing for daily packaging-room use. Dry-ink coding station on the seal line for lot or date code. The unit is sized for vacuum or gas-flush packaging runs that previously required a chamber sealer batch process, with the throughput advantage of a continuous-band design.