Skip to content
Request Quote Check Order Status Financing About Us Contact Us

Sealer Sales SS-1622MK-Combo Fully Adjustable L-Bar Sealer with 28"L x 18"W x 8"H Shrink Tunnel, 16" x 22" Seal Area, 220V, 10 to 15 PPM

SKUSS-1622MK-Combo BrandSealer Sales
Sealer Sales SS-1622MK-Combo Fully Adjustable L-Bar Sealer with 28"L x 18"W x 8"H Shrink Tunnel, 16" x 22" Seal Area, 220V, 10 to 15 PPM

The Sealer Sales SS-1622MK-Combo L-Bar Sealer & Shrink Tunnel Combo

The Sealer Sales SS-1622MK-Combo is a fully adjustable combination L-Bar sealer and shrink tunnel on a single unibody frame. The L-Bar is mounted on linear bearings so the operator can slide the seal head forward or back to center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises or lowers the tunnel itself to match the sealer's conveyor height. Throughput is 10 to 15 packages per minute.

Fully Adjustable Geometry

Linear bearings let the L-Bar move forward and back so the operator can center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises the tunnel up or down so the whole package can be tuned to the exact product profile being run.

Micro Knife Band Ribbon Seal, No Seal Wire Replacement

The L-Bar uses Micro Knife seal technology. No seal wires to replace, no consumable heating element changeovers. Cast aluminum seal head with seal head return cylinder for consistent pressure.

28" x 18" x 8" Shrink Tunnel

The shrink tunnel chamber is 28" long, 18" wide, 8" high. Live or dead roller rod conveyor, fully re-circulating air chamber, chromed conveyor rollers and shafts to prevent rust. Heats up to 300°F in under 10 minutes and runs quietly enough for next-station packing without ear protection.

Digital Temperature Control and AC Variable Speed

Digital temperature controller, AC variable speed drive, adjustable air velocity control. Automatic tunnel cool-down with shut-off, anti-jam safety on the conveyor, thermal overload protection on all motors, sealed bearings on drive and idler shafts.

Unibody Frame on Locking Casters

The L-Bar and tunnel share a single unibody frame on locking casters. Move the entire production cell as one piece. One 8 ft. power cord.

Recommended Film: POF

POF shrink film is recommended. PVC is not recommended for this seal head and tunnel profile.

Features & Benefits

  1. Fully adjustable: L-Bar slides on linear bearings, discharge conveyor adjusts vertically, tunnel height adjusts via crank handle
  2. Micro Knife Band Ribbon Seal, no seal wire replacement
  3. Cast aluminum seal head with seal head return cylinder
  4. Dual magnet clamping with variable dwell/seal time
  5. Pin perforated hole punch for tunnel venting
  6. 28" x 18" x 8" shrink tunnel with fully re-circulating air chamber
  7. Live or dead roller rod conveyor, chromed rollers and shafts (no rust)
  8. Digital temperature control with adjustable air velocity
  9. Heats to 300°F in under 10 minutes, automatic cool-down with shut-off
  10. Anti-jam safety on conveyor, thermal overload on all motors, sealed bearings
  11. Unibody frame on locking casters
  12. 10 to 15 packages per minute throughput
  13. Designed for POF shrink film (PVC not recommended)

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$12,705.00
  • Fully adjustable: L-Bar slides on linear bearings, discharge conveyor adjusts vertically, tunnel height adjusts via crank handle
  • Micro Knife Band Ribbon Seal, no seal wire replacement
  • Cast aluminum seal head with seal head return cylinder
  • Dual magnet clamping with variable dwell/seal time
  • Pin perforated hole punch for tunnel venting
    • See full feature list

    The Sealer Sales SS-1622MK-Combo L-Bar Sealer & Shrink Tunnel Combo

    The Sealer Sales SS-1622MK-Combo is a fully adjustable combination L-Bar sealer and shrink tunnel on a single unibody frame. The L-Bar is mounted on linear bearings so the operator can slide the seal head forward or back to center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises or lowers the tunnel itself to match the sealer's conveyor height. Throughput is 10 to 15 packages per minute.

    Fully Adjustable Geometry

    Linear bearings let the L-Bar move forward and back so the operator can center the product into the tunnel mouth. The discharge conveyor adjusts vertically, and a crank handle raises the tunnel up or down so the whole package can be tuned to the exact product profile being run.

    Micro Knife Band Ribbon Seal, No Seal Wire Replacement

    The L-Bar uses Micro Knife seal technology. No seal wires to replace, no consumable heating element changeovers. Cast aluminum seal head with seal head return cylinder for consistent pressure.

    28" x 18" x 8" Shrink Tunnel

    The shrink tunnel chamber is 28" long, 18" wide, 8" high. Live or dead roller rod conveyor, fully re-circulating air chamber, chromed conveyor rollers and shafts to prevent rust. Heats up to 300°F in under 10 minutes and runs quietly enough for next-station packing without ear protection.

    Digital Temperature Control and AC Variable Speed

    Digital temperature controller, AC variable speed drive, adjustable air velocity control. Automatic tunnel cool-down with shut-off, anti-jam safety on the conveyor, thermal overload protection on all motors, sealed bearings on drive and idler shafts.

    Unibody Frame on Locking Casters

    The L-Bar and tunnel share a single unibody frame on locking casters. Move the entire production cell as one piece. One 8 ft. power cord.

    Recommended Film: POF

    POF shrink film is recommended. PVC is not recommended for this seal head and tunnel profile.

    Features & Benefits

    1. Fully adjustable: L-Bar slides on linear bearings, discharge conveyor adjusts vertically, tunnel height adjusts via crank handle
    2. Micro Knife Band Ribbon Seal, no seal wire replacement
    3. Cast aluminum seal head with seal head return cylinder
    4. Dual magnet clamping with variable dwell/seal time
    5. Pin perforated hole punch for tunnel venting
    6. 28" x 18" x 8" shrink tunnel with fully re-circulating air chamber
    7. Live or dead roller rod conveyor, chromed rollers and shafts (no rust)
    8. Digital temperature control with adjustable air velocity
    9. Heats to 300°F in under 10 minutes, automatic cool-down with shut-off
    10. Anti-jam safety on conveyor, thermal overload on all motors, sealed bearings
    11. Unibody frame on locking casters
    12. 10 to 15 packages per minute throughput
    13. Designed for POF shrink film (PVC not recommended)

    Resources & Downloads

    See all from Sealer Sales

    Specifications

    Capability10-15 Packages/Minute
    Dimensions103"L x 32"W x 62"H
    Weight (lbs)950
    Seal Area16"W x 22"L
    Max Film Width20"
    Tunnel Opening28"L x 18"W x 8"H
    Throughput10 to 15 packages per minute
    Power220V / 1 Phase / 45 Amps
    Tunnel Warm-UpUp to 300°F in under 10 minutes
    Temperature ControlDigital with automatic cool-down and shut-off
    Air VelocityAdjustable
    ConveyorLive or dead roller rod, chromed rollers and shafts
    Seal TechnologyMicro Knife Band Ribbon, cast aluminum seal head
    Hold-DownDual magnet
    AdjustmentL-Bar linear bearings (forward/back), conveyor vertical, tunnel crank height
    SafetyAnti-jam on conveyor, thermal overload on motors, sealed bearings
    Recommended FilmPOF (PVC not recommended)
    Combined Unit Dimensions103"L x 32"W x 62"H
    Weight950 lbs
    Power Cord8 ft, included
    MobilityUnibody frame on locking casters

    Manufacturer's Warranty

    • 6 Month

      Labor

    • 6 Month

      Parts

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're exited to serve you next! 

    The Sealer Sales SS-1622MK-Combo L-Bar Sealer & Shrink Tunnel Combo

    Product Features

    1. Fully adjustable: L-Bar slides on linear bearings, discharge conveyor adjusts vertically, tunnel height adjusts via crank handle
    2. Micro Knife Band Ribbon Seal, no seal wire replacement
    3. Cast aluminum seal head with seal head return cylinder
    4. Dual magnet clamping with variable dwell/seal time
    5. Pin perforated hole punch for tunnel venting
    6. 28" x 18" x 8" shrink tunnel with fully re-circulating air chamber
    7. Live or dead roller rod conveyor, chromed rollers and shafts (no rust)
    8. Digital temperature control with adjustable air velocity
    9. Heats to 300°F in under 10 minutes, automatic cool-down with shut-off
    10. Anti-jam safety on conveyor, thermal overload on all motors, sealed bearings
    11. Unibody frame on locking casters
    12. 10 to 15 packages per minute throughput
    13. Designed for POF shrink film (PVC not recommended)

    See all from Sealer Sales

    Specifications

    Capability10-15 Packages/Minute
    Dimensions103"L x 32"W x 62"H
    Weight (lbs)950
    Seal Area16"W x 22"L
    Max Film Width20"
    Tunnel Opening28"L x 18"W x 8"H
    Throughput10 to 15 packages per minute
    Power220V / 1 Phase / 45 Amps
    Tunnel Warm-UpUp to 300°F in under 10 minutes
    Temperature ControlDigital with automatic cool-down and shut-off
    Air VelocityAdjustable
    ConveyorLive or dead roller rod, chromed rollers and shafts
    Seal TechnologyMicro Knife Band Ribbon, cast aluminum seal head
    Hold-DownDual magnet
    AdjustmentL-Bar linear bearings (forward/back), conveyor vertical, tunnel crank height
    SafetyAnti-jam on conveyor, thermal overload on motors, sealed bearings
    Recommended FilmPOF (PVC not recommended)
    Combined Unit Dimensions103"L x 32"W x 62"H
    Weight950 lbs
    Power Cord8 ft, included
    MobilityUnibody frame on locking casters

    Manufacturer's Warranty

      1/2 year

      Labor

      1/2 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch