The Sirman 40874566 Spiral Dough Mixer
The Sirman Hercules 40 TA Timer is a 43 qt spiral dough mixer built for pizzerias, bakeries, pastry shops, commissaries, and tortilla operations that knead real volume every day. The removable stainless steel bowl handles anywhere from 9 lb to 60 lb of dough at 60 percent hydration or higher, so the same machine covers a small test batch and a full weekend pizza prep. Set the mechanical timer, walk away to stretch pies or sheet pastry, and the mixer stops itself when the batch is done.
Lift Head and Removable Bowl for Fast Cleanup
Fixed-bowl spiral mixers make you scrape sticky dough out while leaning over the rim, and residue left in the corners is how flour beetles and sour smells get started. The Hercules 40 TA works differently. Raise the head, lift the bowl off the base, and carry it straight to the sink for a full wash. The bowl is heavy-duty stainless steel with a reinforced edge that stands up to daily bumps against the pot sink, and the stainless steel spiral hook and kneading bar are exposed with the head up, so you can clean them on all sides instead of wiping blind.
2 HP Motor with Oil-Bath Gearbox and Chain Drive
A 1500 W, 2 HP high-torque motor turns the spiral at 94 RPM while the bowl rotates at 11 RPM, working the dough against the kneading bar to develop gluten evenly without overheating it. Power gets to the spiral through a sturdy oil-bath gearbox and a reinforced chain drive, a heavier transmission than the belt drives on light-duty mixers that stretch and slip under a stiff 60 lb batch. If you push it too hard, a thermal overload circuit breaker cuts power before the motor cooks itself, and the low-voltage IP 67 waterproof no-volt release controls keep the machine from restarting on its own after a power interruption.
Interlocked Lid with Feed Opening
The lid locks the machine out when it is open, which keeps hands away from the moving spiral. You still are not stuck waiting to adjust a batch: a feed opening in the lid lets you stream in flour, water, or salt while the mixer runs, so you can tighten up a slack dough mid-cycle without stopping and restarting. The body is thick C 40 steel finished in a scratch-resistant powder coating that shrugs off the daily knocks of a busy prep area.
About Sirman
Sirman is a globally respected manufacturer of professional foodservice equipment, known for its engineering precision, Italian manufacturing standards, and long-standing reliability in demanding kitchen environments. With over five decades of innovation, Sirman designs and produces slicers, mixers, vacuum packers, and other essentials trusted by chefs, institutions, and chains in over 130 countries. All design, production, and quality control are centralized in-house, ensuring tight performance standards across the line. Backed by direct distribution hubs in the U.S., Brazil, and China, Sirman supports its products with responsive service and a deep understanding of real-world kitchen operations.
Features & Benefits
-
43 qt spiral dough mixer for pizzerias, bakeries, pastry shops, commissaries, and tortilla production
-
Rated for hard doughs at 60 percent hydration or more, from small test batches to full-capacity loads
-
Lift head and removable bowl for easy, thorough sanitation
-
Heavy-duty stainless steel bowl with reinforced edge, 17 3/4 in. diameter x 10 1/4 in. deep
-
Heavy-duty stainless steel spiral dough hook and kneading bar
-
Interlocked lid with feed opening to add ingredients during operation
-
Mechanical timer control for unattended mixing
-
Waterproof IP 67 controls with no-volt release protection
-
Thermal overload protection circuit breaker
-
High-efficiency, high-torque motor with oil-bath gearbox and reinforced chain drive
-
Thick C 40 steel body with scratch-resistant powder coating
-
Rolls on casters for easy repositioning in the prep area
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Sirman 40874566 Spiral Dough Mixer
The Sirman Hercules 40 TA Timer is a 43 qt spiral dough mixer built for pizzerias, bakeries, pastry shops, commissaries, and tortilla operations that knead real volume every day. The removable stainless steel bowl handles anywhere from 9 lb to 60 lb of dough at 60 percent hydration or higher, so the same machine covers a small test batch and a full weekend pizza prep. Set the mechanical timer, walk away to stretch pies or sheet pastry, and the mixer stops itself when the batch is done.
Lift Head and Removable Bowl for Fast Cleanup
Fixed-bowl spiral mixers make you scrape sticky dough out while leaning over the rim, and residue left in the corners is how flour beetles and sour smells get started. The Hercules 40 TA works differently. Raise the head, lift the bowl off the base, and carry it straight to the sink for a full wash. The bowl is heavy-duty stainless steel with a reinforced edge that stands up to daily bumps against the pot sink, and the stainless steel spiral hook and kneading bar are exposed with the head up, so you can clean them on all sides instead of wiping blind.
2 HP Motor with Oil-Bath Gearbox and Chain Drive
A 1500 W, 2 HP high-torque motor turns the spiral at 94 RPM while the bowl rotates at 11 RPM, working the dough against the kneading bar to develop gluten evenly without overheating it. Power gets to the spiral through a sturdy oil-bath gearbox and a reinforced chain drive, a heavier transmission than the belt drives on light-duty mixers that stretch and slip under a stiff 60 lb batch. If you push it too hard, a thermal overload circuit breaker cuts power before the motor cooks itself, and the low-voltage IP 67 waterproof no-volt release controls keep the machine from restarting on its own after a power interruption.
Interlocked Lid with Feed Opening
The lid locks the machine out when it is open, which keeps hands away from the moving spiral. You still are not stuck waiting to adjust a batch: a feed opening in the lid lets you stream in flour, water, or salt while the mixer runs, so you can tighten up a slack dough mid-cycle without stopping and restarting. The body is thick C 40 steel finished in a scratch-resistant powder coating that shrugs off the daily knocks of a busy prep area.
About Sirman
Sirman is a globally respected manufacturer of professional foodservice equipment, known for its engineering precision, Italian manufacturing standards, and long-standing reliability in demanding kitchen environments. With over five decades of innovation, Sirman designs and produces slicers, mixers, vacuum packers, and other essentials trusted by chefs, institutions, and chains in over 130 countries. All design, production, and quality control are centralized in-house, ensuring tight performance standards across the line. Backed by direct distribution hubs in the U.S., Brazil, and China, Sirman supports its products with responsive service and a deep understanding of real-world kitchen operations.
Features & Benefits
-
43 qt spiral dough mixer for pizzerias, bakeries, pastry shops, commissaries, and tortilla production
-
Rated for hard doughs at 60 percent hydration or more, from small test batches to full-capacity loads
-
Lift head and removable bowl for easy, thorough sanitation
-
Heavy-duty stainless steel bowl with reinforced edge, 17 3/4 in. diameter x 10 1/4 in. deep
-
Heavy-duty stainless steel spiral dough hook and kneading bar
-
Interlocked lid with feed opening to add ingredients during operation
-
Mechanical timer control for unattended mixing
-
Waterproof IP 67 controls with no-volt release protection
-
Thermal overload protection circuit breaker
-
High-efficiency, high-torque motor with oil-bath gearbox and reinforced chain drive
-
Thick C 40 steel body with scratch-resistant powder coating
-
Rolls on casters for easy repositioning in the prep area
Resources & Downloads
See all from Sirman
Specifications
| Bowl Capacity | 43 qt |
| Dough Capacity (60% Hydration) | 9 - 60 lb (4 - 27 kg) |
| Bowl Dimensions | 17 3/4 in. diameter x 10 1/4 in. deep |
| Bowl Type | Removable |
| Head | Liftable |
| Bowl Speed | 11 RPM |
| Spiral Speed | 94 RPM |
| Motor | 2 HP / 1500 W |
| Drive | Oil-bath gearbox with reinforced chain drive |
| Controls | Timer, low-voltage IP 67 waterproof no-volt release |
| Overload Protection | Thermal overload circuit breaker |
| Lid | Interlocked with feed opening |
| Body Construction | C 40 steel with scratch-resistant powder coating |
| Bowl Material | Stainless steel with reinforced edge |
| Spiral Hook and Kneading Bar | Stainless steel |
| Voltage | 220 V, 60 Hz, single phase |
| Amps | 9.5 A |
| Plug | NEMA 6-15P |
| Cord | SJTO AWG 12 |
| Overall Width | 19 19/64 in. |
| Overall Depth | 35 53/64 in. |
| Overall Height | 32 9/32 in. |
| Height with Head Raised | 56 11/16 in. |
| Net Weight | 340 lb |
| Shipping Dimensions | 39 in. x 29 in. x 55 in. |
| Gross Weight | 400 lb |
| Country of Origin | Italy |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
-
Made in Italy

