The Alexander Industries SUKD4-3-24 Cooler and Freezer Shelving Unit
The Alexander Industries SUKD4-3-24 is a 48 x 24 in. aluminum cooler and freezer shelving unit with three adjustable shelves on a 60 in. tall frame. It is a stationary unit built for the main wall of a walk-in cooler or freezer, or a dry storage room in a restaurant or school kitchen. The unit arrives knocked down for assembly and is rated for a 2,000 lb load.
1-1/2 In. Square Aluminum Tube Shelves
Each shelf is built from 1-1/2 in. square aluminum tube with a .0093 in. wall, and a 24 in. wide shelf carries five tube supports running its length. Aluminum will not rust in a walk-in cooler or freezer where condensation and daily hose-downs eat through painted wire, and the open tube slats let cold air move around cases and pans instead of trapping it under a solid deck.
Adjustable Shelves on 1-1/4 In. Tube Legs
The four legs are 1-1/4 in. o.d. aluminum tube with a .125 in. wall and plastic caps at both ends, so the feet do not scar a cooler floor. Each shelf locks to the legs with only four set screws, which makes assembly fast and lets you reset shelf height when your case sizes change.
2,000 Lb Load Capacity
The frame is rated to hold 2,000 lb, enough for cased produce, bagged flour, kegs and stacked lugs across three shelves. Other sizes are available from Alexander if the 48 x 24 in. footprint does not fit your room.
Features & Benefits
-
Holds cased, bagged and boxed product on three adjustable shelves for walk-in cooler, freezer and dry storage
-
Shelves built from 1-1/2 in. square aluminum tube with a .0093 in. wall
-
Legs made from 1-1/4 in. o.d. x .125 in. wall aluminum tube with plastic caps at both ends
-
Adjustable shelf height along the full-height legs
-
Fast assembly with only four set screws per shelf
-
24 in. wide shelves carry five tube supports for a flat, ventilated deck
-
Rated for a 2,000 pound load
-
Aluminum construction that will not rust in cold, wet storage
-
Arrives knocked down for on-site assembly
-
Other sizes available from the same knocked down shelf line
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Holds cased, bagged and boxed product on three adjustable shelves for walk-in cooler, freezer and dry storage
Shelves built from 1-1/2 in. square aluminum tube with a .0093 in. wall
Legs made from 1-1/4 in. o.d. x .125 in. wall aluminum tube with plastic caps at both ends
Adjustable shelf height along the full-height legs
Fast assembly with only four set screws per shelf
The Alexander Industries SUKD4-3-24 Cooler and Freezer Shelving Unit
The Alexander Industries SUKD4-3-24 is a 48 x 24 in. aluminum cooler and freezer shelving unit with three adjustable shelves on a 60 in. tall frame. It is a stationary unit built for the main wall of a walk-in cooler or freezer, or a dry storage room in a restaurant or school kitchen. The unit arrives knocked down for assembly and is rated for a 2,000 lb load.
1-1/2 In. Square Aluminum Tube Shelves
Each shelf is built from 1-1/2 in. square aluminum tube with a .0093 in. wall, and a 24 in. wide shelf carries five tube supports running its length. Aluminum will not rust in a walk-in cooler or freezer where condensation and daily hose-downs eat through painted wire, and the open tube slats let cold air move around cases and pans instead of trapping it under a solid deck.
Adjustable Shelves on 1-1/4 In. Tube Legs
The four legs are 1-1/4 in. o.d. aluminum tube with a .125 in. wall and plastic caps at both ends, so the feet do not scar a cooler floor. Each shelf locks to the legs with only four set screws, which makes assembly fast and lets you reset shelf height when your case sizes change.
2,000 Lb Load Capacity
The frame is rated to hold 2,000 lb, enough for cased produce, bagged flour, kegs and stacked lugs across three shelves. Other sizes are available from Alexander if the 48 x 24 in. footprint does not fit your room.
Features & Benefits
-
Holds cased, bagged and boxed product on three adjustable shelves for walk-in cooler, freezer and dry storage
-
Shelves built from 1-1/2 in. square aluminum tube with a .0093 in. wall
-
Legs made from 1-1/4 in. o.d. x .125 in. wall aluminum tube with plastic caps at both ends
-
Adjustable shelf height along the full-height legs
-
Fast assembly with only four set screws per shelf
-
24 in. wide shelves carry five tube supports for a flat, ventilated deck
-
Rated for a 2,000 pound load
-
Aluminum construction that will not rust in cold, wet storage
-
Arrives knocked down for on-site assembly
-
Other sizes available from the same knocked down shelf line
Resources & Downloads
Specifications
| Number of Shelves | 3 |
| Overall Height | 60 in. |
| Overall Depth | 48 in. |
| Overall Width | 24 in. |
| Shelf Material | 1-1/2 in. square aluminum tube |
| Shelf Tube Wall | .0093 in. |
| Tube Supports per Shelf | Five |
| Leg Material | Aluminum tube |
| Leg Size | 1-1/4 in. o.d. x .125 in. wall |
| Leg Caps | Plastic, both ends |
| Shelf Adjustment | Adjustable |
| Fasteners | 4 set screws per shelf |
| Load Capacity | 2,000 lb |
| Construction | Knocked down |
| Mobility | Stationary |
| Shipping Weight | 36 lb |
Manufacturer's Warranty
-
Lifetime Year
Parts
Certifications & Approvals
-
NSF Approved
Holds cased, bagged and boxed product on three adjustable shelves for walk-in cooler, freezer and dry storage