The Asber AECM-24 Cheese Melter
The Asber AECM-24 is a 24 In. gas cheese melter that finishes plates overhead instead of stealing range space: 1 infrared burner at 20,000 BTU with independent controls browns gratins, melts cheese, and crisps skin in the seconds before the plate hits the pass.
Instant-On Infrared Heat With Independent Pilots
Infrared burners reach working heat almost immediately, so the melter earns its keep even when it only runs during service windows. Each burner has independent controls and its own pilot, letting the 36 In. model warm half the cavity on a slow night. Chrome wire grids hold plates and pans over the full width.
All Stainless Build, Wall or Range Mount
Construction is all stainless steel across the interior, exterior front, and sides, with a full size removable stainless drip tray catching drips and crumbs below. A wall mount kit ships standard, and range mount kits (SAL series) hang it over an Asber range instead, so the unit claims zero counter or floor space either way. Chrome wire grids come standard, and the gas conversion kit covers NG or LPG hookup.
Finishing Power Without Losing an Inch of Line
Because the unit mounts on the wall or over an Asber range on its back riser, the melter occupies space no other equipment could use. Every nacho plate, French onion crock, and open-face melt comes out of air rights instead of counter space. Independent burner controls on the 36 In. model mean half power on slow shifts, and the removable drip tray keeps the station sanitary.
A cheese melter is the pick for browning and holding. Plan for a 3/4 In. or larger gas line and remember the mounting clearances: 6 In. to combustibles at rear and sides, with a minimum 4 In. bottom clearance.
About Asber
Asber manufactures commercial refrigeration, cooking, and food distribution equipment for demanding foodservice operations. The brand is part of ONNERA Group, an international equipment manufacturer with more than 2,000 professionals and manufacturing operations across Europe and Mexico. Asber’s North American refrigeration meets UL 471 and NSF-7 standards, while its cooking equipment meets ANSI Z83.11/CSA 1.8 and NSF-4 requirements. Its lineup includes reach-ins, prep tables, chef bases, bar refrigeration, ranges, griddles, fryers, ovens, and holding equipment. Practical engineering features include stainless steel construction, R290 refrigeration systems, efficient insulation, accessible components, and published manuals and parts breakdowns to support ongoing service.
Features & Benefits
-
Overhead browning and holding for pubs, pizzerias, and plating lines
-
20,000 BTU of infrared heat across 24 In. of width
-
Instant-on infrared burners with independent controls and pilots
-
Chrome wire grids hold plates and pans full width
-
Wall mount kit included, range mount kits available
-
Zero counter or floor space claimed either way
-
Full size removable stainless drip tray for crumbs and drips
-
All stainless front, sides, and interior construction
-
Ships NG or LPG with conversion kit included
-
Optional extended range shelf for mounting over a range
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Overhead browning and holding for pubs, pizzerias, and plating lines
20,000 BTU of infrared heat across 24 In. of width
Instant-on infrared burners with independent controls and pilots
Chrome wire grids hold plates and pans full width
Wall mount kit included, range mount kits available
The Asber AECM-24 Cheese Melter
The Asber AECM-24 is a 24 In. gas cheese melter that finishes plates overhead instead of stealing range space: 1 infrared burner at 20,000 BTU with independent controls browns gratins, melts cheese, and crisps skin in the seconds before the plate hits the pass.
Instant-On Infrared Heat With Independent Pilots
Infrared burners reach working heat almost immediately, so the melter earns its keep even when it only runs during service windows. Each burner has independent controls and its own pilot, letting the 36 In. model warm half the cavity on a slow night. Chrome wire grids hold plates and pans over the full width.
All Stainless Build, Wall or Range Mount
Construction is all stainless steel across the interior, exterior front, and sides, with a full size removable stainless drip tray catching drips and crumbs below. A wall mount kit ships standard, and range mount kits (SAL series) hang it over an Asber range instead, so the unit claims zero counter or floor space either way. Chrome wire grids come standard, and the gas conversion kit covers NG or LPG hookup.
Finishing Power Without Losing an Inch of Line
Because the unit mounts on the wall or over an Asber range on its back riser, the melter occupies space no other equipment could use. Every nacho plate, French onion crock, and open-face melt comes out of air rights instead of counter space. Independent burner controls on the 36 In. model mean half power on slow shifts, and the removable drip tray keeps the station sanitary.
A cheese melter is the pick for browning and holding. Plan for a 3/4 In. or larger gas line and remember the mounting clearances: 6 In. to combustibles at rear and sides, with a minimum 4 In. bottom clearance.
About Asber
Asber manufactures commercial refrigeration, cooking, and food distribution equipment for demanding foodservice operations. The brand is part of ONNERA Group, an international equipment manufacturer with more than 2,000 professionals and manufacturing operations across Europe and Mexico. Asber’s North American refrigeration meets UL 471 and NSF-7 standards, while its cooking equipment meets ANSI Z83.11/CSA 1.8 and NSF-4 requirements. Its lineup includes reach-ins, prep tables, chef bases, bar refrigeration, ranges, griddles, fryers, ovens, and holding equipment. Practical engineering features include stainless steel construction, R290 refrigeration systems, efficient insulation, accessible components, and published manuals and parts breakdowns to support ongoing service.
Features & Benefits
-
Overhead browning and holding for pubs, pizzerias, and plating lines
-
20,000 BTU of infrared heat across 24 In. of width
-
Instant-on infrared burners with independent controls and pilots
-
Chrome wire grids hold plates and pans full width
-
Wall mount kit included, range mount kits available
-
Zero counter or floor space claimed either way
-
Full size removable stainless drip tray for crumbs and drips
-
All stainless front, sides, and interior construction
-
Ships NG or LPG with conversion kit included
-
Optional extended range shelf for mounting over a range
Resources & Downloads
See all from Asber
Specifications
| Number of Burners | 1 |
| Burner Type | Infrared |
| Burner Rating | 20,000 BTU each |
| Total Output | 20,000 BTU |
| Burner Control | Independent per burner |
| Ignition | Independent pilot per burner |
| Grids | Chrome wire |
| Drip Tray | Full size stainless steel, removable |
| Mounting | Wall kit included; range kits available |
| Construction | Stainless interior, exterior front and sides |
| Clearance | 6 In. rear and sides; 4 In. bottom minimum |
| Gas Type | Natural Gas (NG) / Propane Gas (LPG) |
| Gas Conversion Kit | Included |
| Gas Pressure | 5 In. W.C. (NG) / 10 In. W.C. (LPG) |
| Gas Connection | 3/4 In. gas line or larger |
| Pressure Regulator | Included |
| Exterior Dimensions (W x D x H) | 24 x 18 x 19-3/4 In |
| Shipping Weight | 102 lbs |
| Country of Origin | North America |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
Overhead browning and holding for pubs, pizzerias, and plating lines