Skip to content

Asber AEHC-36 25 In. Full Height Combination Heating and Proofing Cabinet, 36 Sheet Pans, 2.0 kW

SKUAEHC-36 BrandAsber

The Asber AEHC-36 Heating and Proofing Cabinet

The Asber AEHC-36 is a full height combination heating and proofing cabinet that covers two jobs in one insulated footprint: hold cooked food hot for service, or proof dough under controlled warmth and humidity. It carries up to (36) 18 x 26 In. sheet pans on fixed aluminum lip load channels, and runs on a standard 115V circuit at 2.0 kW.

Heat Mode to 180°F, Proof Mode to 95% Humidity

Switch modes to match the day: heat mode holds internal temperatures up to 180°F for service-ready food, while proof mode delivers up to 95% relative humidity at 110°F, the consistent warm-and-wet conditions that make dough rise on schedule instead of on its own time. Forced air circulation moves heat and humidity evenly from top rack to bottom, and an extra large water reservoir runs long proofing cycles without constant refills. Removable analog controls with a digital display are simple to run, service, and calibrate.

Insulated Stainless Cabinet With Lexan Window

Heavy duty stainless steel construction shrugs off corrosion and daily bumps, the fully insulated body holds temperature efficiently, and the Lexan window in its aluminum frame shows you the racks without opening the door and dropping the humidity. A tight fitting door gasket seals the environment, corner bumpers protect both cabinet and doorways in transit, and the bottom loading design makes tray insertion natural.

Moves Like a Cart, Holds Like a Cabinet

Corner bumpers and a compact 25-3/8 In. width let the cabinet travel through standard doorways between prep, proofing, and service without chewing up door frames. The lip load channels hold pans steady in motion, and the insulated body keeps its internal climate stable long enough to roll from the bakery to the line without losing the proof. When it parks, the Lexan window lets staff check progress without opening the door.

Sized for bakeries, cafeterias, and banquet operations proofing and holding at production volume; lighter programs save money and height with the half height AEHC-18. It plugs into a 115V circuit on a NEMA 5-20P plug drawing 16 amps, so confirm the receptacle before delivery day.

Features & Benefits

  1. Dual-mode cabinet for bakeries, cafeterias, and banquet holding lines
  2. Holds (36) 18 x 26 In. sheet pans on fixed lip load channels
  3. Cooked food stays at safe serving temperature through the meal window
  4. Proof mode delivers up to 95% humidity at 110°F
  5. Forced air circulation for even top-to-bottom results
  6. Extra large water reservoir for long proofing cycles without refills
  7. Removable analog controls with digital display, easy to calibrate
  8. Lexan window shows racks without opening the door
  9. Fully insulated stainless body with tight fitting gasket
  10. Corner bumpers protect cabinet and doorways on the move
  11. Plugs into a standard kitchen circuit, no heavy wiring needed

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,980.00
  • Dual-mode cabinet for bakeries, cafeterias, and banquet holding lines
  • Holds (36) 18 x 26 In. sheet pans on fixed lip load channels
  • Cooked food stays at safe serving temperature through the meal window
  • Proof mode delivers up to 95% humidity at 110°F
  • Forced air circulation for even top-to-bottom results
  • See full feature list

    The Asber AEHC-36 Heating and Proofing Cabinet

    The Asber AEHC-36 is a full height combination heating and proofing cabinet that covers two jobs in one insulated footprint: hold cooked food hot for service, or proof dough under controlled warmth and humidity. It carries up to (36) 18 x 26 In. sheet pans on fixed aluminum lip load channels, and runs on a standard 115V circuit at 2.0 kW.

    Heat Mode to 180°F, Proof Mode to 95% Humidity

    Switch modes to match the day: heat mode holds internal temperatures up to 180°F for service-ready food, while proof mode delivers up to 95% relative humidity at 110°F, the consistent warm-and-wet conditions that make dough rise on schedule instead of on its own time. Forced air circulation moves heat and humidity evenly from top rack to bottom, and an extra large water reservoir runs long proofing cycles without constant refills. Removable analog controls with a digital display are simple to run, service, and calibrate.

    Insulated Stainless Cabinet With Lexan Window

    Heavy duty stainless steel construction shrugs off corrosion and daily bumps, the fully insulated body holds temperature efficiently, and the Lexan window in its aluminum frame shows you the racks without opening the door and dropping the humidity. A tight fitting door gasket seals the environment, corner bumpers protect both cabinet and doorways in transit, and the bottom loading design makes tray insertion natural.

    Moves Like a Cart, Holds Like a Cabinet

    Corner bumpers and a compact 25-3/8 In. width let the cabinet travel through standard doorways between prep, proofing, and service without chewing up door frames. The lip load channels hold pans steady in motion, and the insulated body keeps its internal climate stable long enough to roll from the bakery to the line without losing the proof. When it parks, the Lexan window lets staff check progress without opening the door.

    Sized for bakeries, cafeterias, and banquet operations proofing and holding at production volume; lighter programs save money and height with the half height AEHC-18. It plugs into a 115V circuit on a NEMA 5-20P plug drawing 16 amps, so confirm the receptacle before delivery day.

    Features & Benefits

    1. Dual-mode cabinet for bakeries, cafeterias, and banquet holding lines
    2. Holds (36) 18 x 26 In. sheet pans on fixed lip load channels
    3. Cooked food stays at safe serving temperature through the meal window
    4. Proof mode delivers up to 95% humidity at 110°F
    5. Forced air circulation for even top-to-bottom results
    6. Extra large water reservoir for long proofing cycles without refills
    7. Removable analog controls with digital display, easy to calibrate
    8. Lexan window shows racks without opening the door
    9. Fully insulated stainless body with tight fitting gasket
    10. Corner bumpers protect cabinet and doorways on the move
    11. Plugs into a standard kitchen circuit, no heavy wiring needed

    Resources & Downloads

    Specifications

    ConfigurationFull height
    Sheet Pan Capacity(36) 18 x 26 In
    Pan SupportFixed aluminum lip load channels
    Heat ModeUp to 180°F
    Proof ModeUp to 95% RH at 110°F
    Air CirculationForced
    Water ReservoirExtra large
    ControlsAnalog, removable, with digital display
    WindowLexan with aluminum frame
    Door GasketTight fitting
    LoadingBottom loading design
    BumpersCorner bumpers
    ConstructionHeavy duty stainless steel, insulated
    Voltage115V, 60 Hz
    Power2.0 kW
    Full Load Amps16.0
    Plug TypeNEMA 5-20P
    Exterior Dimensions (W x D x H)25-3/8 x 33-1/2 x 69-5/8 In
    Shipping Weight212 lbs
    Shipping Volume38.8 cu. ft
    Country of OriginNorth America

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    Certifications & Approvals

    • CETLUS
      ETL US & Canada
    • ETLSAN
      ETL Sanitation

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Asber AEHC-36 Heating and Proofing Cabinet

    Product Features

    1. Dual-mode cabinet for bakeries, cafeterias, and banquet holding lines
    2. Holds (36) 18 x 26 In. sheet pans on fixed lip load channels
    3. Cooked food stays at safe serving temperature through the meal window
    4. Proof mode delivers up to 95% humidity at 110°F
    5. Forced air circulation for even top-to-bottom results
    6. Extra large water reservoir for long proofing cycles without refills
    7. Removable analog controls with digital display, easy to calibrate
    8. Lexan window shows racks without opening the door
    9. Fully insulated stainless body with tight fitting gasket
    10. Corner bumpers protect cabinet and doorways on the move
    11. Plugs into a standard kitchen circuit, no heavy wiring needed

    Specifications

    ConfigurationFull height
    Sheet Pan Capacity(36) 18 x 26 In
    Pan SupportFixed aluminum lip load channels
    Heat ModeUp to 180°F
    Proof ModeUp to 95% RH at 110°F
    Air CirculationForced
    Water ReservoirExtra large
    ControlsAnalog, removable, with digital display
    WindowLexan with aluminum frame
    Door GasketTight fitting
    LoadingBottom loading design
    BumpersCorner bumpers
    ConstructionHeavy duty stainless steel, insulated
    Voltage115V, 60 Hz
    Power2.0 kW
    Full Load Amps16.0
    Plug TypeNEMA 5-20P
    Exterior Dimensions (W x D x H)25-3/8 x 33-1/2 x 69-5/8 In
    Shipping Weight212 lbs
    Shipping Volume38.8 cu. ft
    Country of OriginNorth America

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch