The Asber APTM-72-30 Mega Top Prep Table
The Asber APTM-72-30 is a 73 In. mega top prep table with a mega top rail holding 30 pans in a double row and 20.6 cu. ft. of refrigerated storage below, behind 3 doors. The extra-deep top puts twice the toppings in reach, which is why mega tops earn their keep anywhere the build list runs long: burrito lines, sub shops, loaded burger stations. The R-290 system holds 32°F to 41°F in ambient conditions up to 100°F and 65% relative humidity.
Airflow That Cools Pans From Below
Most prep rails blow cold air across the top of the pans, which crusts and dries whatever sits in them. Asber routes the cold air underneath the pans instead, holding ingredients at temperature without dehydrating them, so your sliced tomatoes at 4 pm look like they did at 11 am. An integrated bottom air panel blocks spills from reaching the lower compartment and directs airflow down for even cabinet cooling.
Full Length 10 In. Nylamid Cutting Board
A removable, full length 10 In. white Nylamid cutting board gives you a continuous work surface across the entire table. Nylamid is a dense food-contact material that stands up to knife work without splintering the way cheap poly boards do, and because the board lifts off, it goes straight to the dish sink at close.
R-290 Refrigeration With Stainless Steel Construction
A hermetic 1/4 HP compressor and epoxy coated evaporator run on R-290 hydrocarbon refrigerant, which recovers temperature quickly after lid openings and meets DOE energy conservation standards with ODP 0 and GWP 3. The cabinet is stainless steel inside and out across the front and sides, with coved corner floors, 2 In. of Ecomate foamed-in-place insulation, and an electronic controller. Casters come standard, front pair with brakes, so the table rolls out for cleaning.
About Asber
Asber manufactures commercial refrigeration, cooking, and food distribution equipment for demanding foodservice operations. The brand is part of ONNERA Group, an international equipment manufacturer with more than 2,000 professionals and manufacturing operations across Europe and Mexico. Asber’s North American refrigeration meets UL 471 and NSF-7 standards, while its cooking equipment meets ANSI Z83.11/CSA 1.8 and NSF-4 requirements. Its lineup includes reach-ins, prep tables, chef bases, bar refrigeration, ranges, griddles, fryers, ovens, and holding equipment. Practical engineering features include stainless steel construction, R290 refrigeration systems, efficient insulation, accessible components, and published manuals and parts breakdowns to support ongoing service.
Features & Benefits
-
Make-line workhorse for sub shops, delis, and burrito lines building to order all day
-
30 pan refrigerated rail over 20.6 cu. ft. of base storage with 3 doors
-
Ingredients hold temperature without drying, cooled from beneath the pans
-
Spill protection and even base cooling from the integrated bottom air panel
-
Continuous work surface on the removable 10 In. Nylamid cutting board
-
Holds 32°F to 41°F in ambient heat up to 100°F
-
Starter pan set included, so the rail works on day one
-
Quick recovery from a 1/4 HP compressor and R-290 refrigerant
-
Sanitation-ready stainless body with coved corner floor
-
Roll-out cleaning on 4 In. casters, front with brakes
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Asber APTM-72-30 Mega Top Prep Table
The Asber APTM-72-30 is a 73 In. mega top prep table with a mega top rail holding 30 pans in a double row and 20.6 cu. ft. of refrigerated storage below, behind 3 doors. The extra-deep top puts twice the toppings in reach, which is why mega tops earn their keep anywhere the build list runs long: burrito lines, sub shops, loaded burger stations. The R-290 system holds 32°F to 41°F in ambient conditions up to 100°F and 65% relative humidity.
Airflow That Cools Pans From Below
Most prep rails blow cold air across the top of the pans, which crusts and dries whatever sits in them. Asber routes the cold air underneath the pans instead, holding ingredients at temperature without dehydrating them, so your sliced tomatoes at 4 pm look like they did at 11 am. An integrated bottom air panel blocks spills from reaching the lower compartment and directs airflow down for even cabinet cooling.
Full Length 10 In. Nylamid Cutting Board
A removable, full length 10 In. white Nylamid cutting board gives you a continuous work surface across the entire table. Nylamid is a dense food-contact material that stands up to knife work without splintering the way cheap poly boards do, and because the board lifts off, it goes straight to the dish sink at close.
R-290 Refrigeration With Stainless Steel Construction
A hermetic 1/4 HP compressor and epoxy coated evaporator run on R-290 hydrocarbon refrigerant, which recovers temperature quickly after lid openings and meets DOE energy conservation standards with ODP 0 and GWP 3. The cabinet is stainless steel inside and out across the front and sides, with coved corner floors, 2 In. of Ecomate foamed-in-place insulation, and an electronic controller. Casters come standard, front pair with brakes, so the table rolls out for cleaning.
About Asber
Asber manufactures commercial refrigeration, cooking, and food distribution equipment for demanding foodservice operations. The brand is part of ONNERA Group, an international equipment manufacturer with more than 2,000 professionals and manufacturing operations across Europe and Mexico. Asber’s North American refrigeration meets UL 471 and NSF-7 standards, while its cooking equipment meets ANSI Z83.11/CSA 1.8 and NSF-4 requirements. Its lineup includes reach-ins, prep tables, chef bases, bar refrigeration, ranges, griddles, fryers, ovens, and holding equipment. Practical engineering features include stainless steel construction, R290 refrigeration systems, efficient insulation, accessible components, and published manuals and parts breakdowns to support ongoing service.
Features & Benefits
-
Make-line workhorse for sub shops, delis, and burrito lines building to order all day
-
30 pan refrigerated rail over 20.6 cu. ft. of base storage with 3 doors
-
Ingredients hold temperature without drying, cooled from beneath the pans
-
Spill protection and even base cooling from the integrated bottom air panel
-
Continuous work surface on the removable 10 In. Nylamid cutting board
-
Holds 32°F to 41°F in ambient heat up to 100°F
-
Starter pan set included, so the rail works on day one
-
Quick recovery from a 1/4 HP compressor and R-290 refrigerant
-
Sanitation-ready stainless body with coved corner floor
-
Roll-out cleaning on 4 In. casters, front with brakes
Resources & Downloads
See all from Asber
Specifications
| Pan Capacity | 30 pans |
| Included Pans | 1/6 and 1/9 size pans, 4 In. deep |
| Cutting Board | White Nylamid, full length, 10 In |
| Base Capacity | 20.6 cu. ft |
| Number of Doors | 3 |
| Number of Shelves | 3 |
| Temperature Range | 32°F to 41°F |
| Ambient Rating | 100°F at 65% relative humidity |
| Controller | Electronic |
| Refrigeration System | Self-contained |
| Compressor | Hermetic, 1/4 HP |
| Evaporator | Epoxy coated |
| Refrigerant | R-290 hydrocarbon |
| Voltage | 115V, 60 Hz, 1 Phase |
| Full Load Amps | 2.5 |
| Plug Type | NEMA 5-15P |
| Insulation | 2 In. Ecomate CFC free foamed in place |
| Exterior Finish | Stainless steel front and sides |
| Interior Finish | Stainless steel, coved corner floor |
| Casters | 4 In., front with brakes |
| Exterior Dimensions (W x D x H) | 72-7/8 x 36-3/8 x 50-1/2 In |
| Shipping Weight | 410 lbs |
| Shipping Volume | 95.3 cu. ft |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

