The Atosa AMC-4902 Milk Cooler
The Atosa AMC-4902 forced air milk cooler provides reliable, rapid cooling for milk and dairy products in commercial kitchens, cafeterias, and convenience stores. With a 17.52 cubic foot interior, it holds up to 12 standard 13" x 13" milk crates, offering ample storage without taking up excessive floor space. This capacity helps reduce spoilage and extends shelf life for medium-volume operations.
Top Mount Forced Air Refrigeration for Uniform Temperature Control
A top-mounted forced air refrigeration system circulates chilled air evenly throughout the cabinet, eliminating hot spots and temperature swings that can lead to uneven cooling. Milk crates stored at any position receive consistent cooling, which helps maintain product quality and reduces the risk of bacterial growth. The 1/4 HP compressor uses R290 refrigerant for efficient operation and lower environmental impact than older refrigerants.
Double Sided Sliding Doors with Heavy Duty Reinforced Floor
Dual sliding doors allow access from either side, making restocking and retrieval faster in busy kitchens or service lines. This two-sided design helps reduce bottlenecks and supports flexible kitchen layouts. The reinforced floor holds the full weight of loaded milk crates without sagging, maintaining structural integrity at maximum capacity. Dunnage racks keep crates off the floor to improve airflow and make cleaning easier.
Stainless Steel Exterior and Interior with Digital Temperature Controller
The AMC-4902 features stainless steel construction inside and out, resisting corrosion from condensation and frequent cleaning. This design maintains a professional appearance and meets health department requirements for food contact surfaces. The digital temperature controller allows precise adjustment, with recommended settings between 35°F and 38°F for milk storage. Snap-in door gaskets provide a tight seal and can be replaced quickly during maintenance to minimize downtime. A standard door lock secures inventory during off-hours. Metal door handles are built to handle frequent use without loosening or breaking. The floor drain with plug allows you to flush the interior and drain condensation easily, without moving the unit or using extra equipment. The AMC-4902 runs on standard 115V power with a NEMA 5-15P plug, so no special electrical setup is needed.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
17.52 cubic foot capacity holds 12 standard 13" x 13" milk crates
-
Double sided sliding doors for access from both sides
-
Top mount forced air refrigeration for uniform temperature distribution
-
Stainless steel exterior and interior construction
-
Digital temperature controller for precise monitoring
-
Heavy duty reinforced floor supports full load capacity
-
Dunnage racks included for elevated storage and airflow
-
Metal door handles for durability
-
Standard door lock for security
-
Snap-in door gaskets for easy replacement
-
Floor drain with plug for simplified cleaning
-
R290 refrigerant for efficient, environmentally responsible cooling
-
1/4 HP compressor
-
115V/60Hz single-phase power with NEMA 5-15P plug
-
4" casters for mobility
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Atosa AMC-4902 Milk Cooler
The Atosa AMC-4902 forced air milk cooler provides reliable, rapid cooling for milk and dairy products in commercial kitchens, cafeterias, and convenience stores. With a 17.52 cubic foot interior, it holds up to 12 standard 13" x 13" milk crates, offering ample storage without taking up excessive floor space. This capacity helps reduce spoilage and extends shelf life for medium-volume operations.
Top Mount Forced Air Refrigeration for Uniform Temperature Control
A top-mounted forced air refrigeration system circulates chilled air evenly throughout the cabinet, eliminating hot spots and temperature swings that can lead to uneven cooling. Milk crates stored at any position receive consistent cooling, which helps maintain product quality and reduces the risk of bacterial growth. The 1/4 HP compressor uses R290 refrigerant for efficient operation and lower environmental impact than older refrigerants.
Double Sided Sliding Doors with Heavy Duty Reinforced Floor
Dual sliding doors allow access from either side, making restocking and retrieval faster in busy kitchens or service lines. This two-sided design helps reduce bottlenecks and supports flexible kitchen layouts. The reinforced floor holds the full weight of loaded milk crates without sagging, maintaining structural integrity at maximum capacity. Dunnage racks keep crates off the floor to improve airflow and make cleaning easier.
Stainless Steel Exterior and Interior with Digital Temperature Controller
The AMC-4902 features stainless steel construction inside and out, resisting corrosion from condensation and frequent cleaning. This design maintains a professional appearance and meets health department requirements for food contact surfaces. The digital temperature controller allows precise adjustment, with recommended settings between 35°F and 38°F for milk storage. Snap-in door gaskets provide a tight seal and can be replaced quickly during maintenance to minimize downtime. A standard door lock secures inventory during off-hours. Metal door handles are built to handle frequent use without loosening or breaking. The floor drain with plug allows you to flush the interior and drain condensation easily, without moving the unit or using extra equipment. The AMC-4902 runs on standard 115V power with a NEMA 5-15P plug, so no special electrical setup is needed.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
17.52 cubic foot capacity holds 12 standard 13" x 13" milk crates
-
Double sided sliding doors for access from both sides
-
Top mount forced air refrigeration for uniform temperature distribution
-
Stainless steel exterior and interior construction
-
Digital temperature controller for precise monitoring
-
Heavy duty reinforced floor supports full load capacity
-
Dunnage racks included for elevated storage and airflow
-
Metal door handles for durability
-
Standard door lock for security
-
Snap-in door gaskets for easy replacement
-
Floor drain with plug for simplified cleaning
-
R290 refrigerant for efficient, environmentally responsible cooling
-
1/4 HP compressor
-
115V/60Hz single-phase power with NEMA 5-15P plug
-
4" casters for mobility
Resources & Downloads
See all from Atosa
Specifications
| Capacity | 17.52 Cu. Ft. |
| Milk Crate Capacity | 12 (13" x 13" crates) |
| Number of Doors | 2 (Double Sided Sliding) |
| Refrigeration Type | Top Mount Forced Air |
| Compressor Power | 1/4 HP |
| Refrigerant | R290 |
| Voltage | 115V / 60Hz / 1-Phase |
| Rated Current | 3.0 A |
| Plug Type | NEMA 5-15P |
| Casters | 4" |
| Exterior Dimensions | 49" (W) x 34 1/4" (D) x 47 1/8" (H) |
| Net Weight | 280 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

