The Atosa MGF67GR Worktop refrigerator
The Atosa MGF67GR combines a two-door refrigerator with a sturdy worktop, giving commercial kitchens both cold storage and a prep surface in one compact unit. With 18.5 cubic feet of storage and temperatures held between 35°F and 38°F, it keeps ingredients close at hand and ready for service. The 4-inch foamed-in-place backsplash worktop makes full use of vertical space while keeping your prep area organized.
Side Mount Compressor with R290 Refrigerant
The side-mounted compressor keeps refrigeration components out of the way, freeing up more interior storage than bottom-mount designs. This setup also improves airflow around the compressor, which helps the unit cool efficiently and last longer. The 1/5 HP compressor runs on R290 refrigerant, offering reliable cooling with a lower environmental impact than older refrigerants. You get dependable performance that meets current environmental standards.
Self-Closing Doors with Stay Open Feature and Four Pre-Installed Shelves
The self-closing doors help keep cold air in during busy prep times, closing automatically from 90 degrees to prevent temperature loss. When you need to load or unload, the doors stay open past that angle so you can work without interruption. Four epoxy-coated wire shelves, two in each section, keep ingredients organized and let cold air move freely. The epoxy finish stands up to moisture and wipes clean easily.
4" Foamed-in-Place Backsplash with Stainless Steel Construction
The 4-inch foamed-in-place backsplash keeps food and liquids from slipping behind the unit, making cleanup easier and maintaining a sanitary prep area. This design also adds insulation along the back of the cabinet. Stainless steel construction resists corrosion and stands up to daily cleaning, so the MGF67GR keeps its professional look even in high-traffic kitchens. Recessed door handles stay out of the way in busy kitchens, while magnetic gaskets keep a tight seal to lock in cold air. The electronic temperature controller lets you monitor and adjust conditions with precision. Casters come pre-installed, so you can move the unit easily for cleaning or rearranging your workspace. The MGF67GR plugs into a standard outlet, so you do not need special wiring to get started.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
18.5 cubic foot capacity for refrigerated prep storage
-
Side mount compressor for improved interior space and cooling efficiency
-
Maintains temperatures between 35°F and 38°F
-
Environmentally friendly R290 refrigerant
-
1/5 HP compressor
-
Two self-closing doors with stay open feature (90° threshold)
-
4" foamed-in-place backsplash for sanitary work surface
-
Stainless steel construction
-
Four pre-installed epoxy-coated wire shelves (two per section)
-
Electronic temperature controller
-
Recessed door handles for space-efficient access
-
Magnetic door gaskets for positive door seal
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Atosa MGF67GR Worktop refrigerator
The Atosa MGF67GR combines a two-door refrigerator with a sturdy worktop, giving commercial kitchens both cold storage and a prep surface in one compact unit. With 18.5 cubic feet of storage and temperatures held between 35°F and 38°F, it keeps ingredients close at hand and ready for service. The 4-inch foamed-in-place backsplash worktop makes full use of vertical space while keeping your prep area organized.
Side Mount Compressor with R290 Refrigerant
The side-mounted compressor keeps refrigeration components out of the way, freeing up more interior storage than bottom-mount designs. This setup also improves airflow around the compressor, which helps the unit cool efficiently and last longer. The 1/5 HP compressor runs on R290 refrigerant, offering reliable cooling with a lower environmental impact than older refrigerants. You get dependable performance that meets current environmental standards.
Self-Closing Doors with Stay Open Feature and Four Pre-Installed Shelves
The self-closing doors help keep cold air in during busy prep times, closing automatically from 90 degrees to prevent temperature loss. When you need to load or unload, the doors stay open past that angle so you can work without interruption. Four epoxy-coated wire shelves, two in each section, keep ingredients organized and let cold air move freely. The epoxy finish stands up to moisture and wipes clean easily.
4" Foamed-in-Place Backsplash with Stainless Steel Construction
The 4-inch foamed-in-place backsplash keeps food and liquids from slipping behind the unit, making cleanup easier and maintaining a sanitary prep area. This design also adds insulation along the back of the cabinet. Stainless steel construction resists corrosion and stands up to daily cleaning, so the MGF67GR keeps its professional look even in high-traffic kitchens. Recessed door handles stay out of the way in busy kitchens, while magnetic gaskets keep a tight seal to lock in cold air. The electronic temperature controller lets you monitor and adjust conditions with precision. Casters come pre-installed, so you can move the unit easily for cleaning or rearranging your workspace. The MGF67GR plugs into a standard outlet, so you do not need special wiring to get started.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
18.5 cubic foot capacity for refrigerated prep storage
-
Side mount compressor for improved interior space and cooling efficiency
-
Maintains temperatures between 35°F and 38°F
-
Environmentally friendly R290 refrigerant
-
1/5 HP compressor
-
Two self-closing doors with stay open feature (90° threshold)
-
4" foamed-in-place backsplash for sanitary work surface
-
Stainless steel construction
-
Four pre-installed epoxy-coated wire shelves (two per section)
-
Electronic temperature controller
-
Recessed door handles for space-efficient access
-
Magnetic door gaskets for positive door seal
-
Pre-installed casters for mobility
-
115V/60Hz single-phase power with NEMA 5-15P plug
Resources & Downloads
See all from Atosa
Specifications
| Capacity | 18.5 Cu. Ft. |
| Number of Doors | 2 |
| Number of Shelves | 4 (2 per section) |
| Temperature Range | 35°F - 38°F |
| Compressor Power | 1/5 HP |
| Compressor Location | Side Mount |
| Refrigerant | R290 |
| Backsplash Height | 4" |
| Voltage | 115V / 60Hz / 1-Phase |
| Amps | 2.8 A |
| Plug Type | NEMA 5-15P |
| Casters | 5" |
| Exterior Dimensions | 67" (W) x 34" (D) x 40 7/10" (H) |
| Net Weight | 326 lbs. |
| Gross Weight | 410 lbs. |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

