The Atosa YRM0600A-261 Modular Half Cube Ice Machine Head
The Atosa YRM0600A-261 is a 30 inch wide modular ice machine head that produces up to 600 lb of half cube ice every 24 hours. It sits on top of an ice storage bin (sold separately, with an optional bin thermostat kit available) and runs on 208-230V single phase power, so it fits bars, restaurants, cafes, and catering operations that go through ice faster than an undercounter unit can keep up. The cabinet measures 30 3/4" wide by 24 1/4" deep by 25 3/4" tall, wears a stainless steel exterior that shrugs off daily wipe-downs, and uses a self-contained air-cooled condensing system charged with R290 refrigerant, so there is no remote compressor to install.
Half Cube Ice Sized for the Glass
Each cube comes out at 3/8" x 7/8" x 7/8", the half-dice size bartenders reach for. Half cubes pack a glass tighter than full cubes, chill drinks quickly, and blend without straining the blender, which makes them a natural fit for soft drinks, mixed cocktails, and iced coffee alike. At 600 lb of production per day, the YRM0600A-261 keeps the bin ahead of demand through a busy service instead of running dry mid-rush.
Digital Controls with a Screwless Front Panel
A digital controller manages the freeze and harvest cycles and gives you a clear readout when you want to check on the machine. When service or cleaning time comes, the screwless front panel comes off without a toolbox hunt, and the removable air filter slides out so you can keep airflow across the condenser strong. A clean filter matters on an air-cooled machine: give the unit room to breathe and keep the condenser clear, and it holds its production rate on hot days. The unit requires a drain connection for the melt water.
Included 3M Water Filter System
Atosa ships a 3M water filter system in the box, something most competing ice machine heads make you buy separately. Filtered water means less scale on the evaporator plate and cleaner tasting, clearer ice in the glass. Plan on a replacement 3M cartridge roughly every 6 months, sooner if your local water runs hard.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
Modular ice machine head for bars, restaurants, and high-volume beverage service; pairs with an ice storage bin (sold separately)
-
High-volume daily production that keeps the storage bin ahead of demand
-
Half cube ice, 3/8" x 7/8" x 7/8"
-
Durable stainless steel exterior
-
Digital control with freeze and harvest cycle management
-
Self-contained, air-cooled condensing unit
-
R290 refrigerant
-
3M water filter system included as standard
-
Removable air filter for easy condenser maintenance
-
Screwless front panel for quick service access
-
Requires a drain connection
-
Optional bin thermostat kit (part BYR0400217031) stops production automatically when the bin is full
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Modular ice machine head for bars, restaurants, and high-volume beverage service; pairs with an ice storage bin (sold separately)
High-volume daily production that keeps the storage bin ahead of demand
Half cube ice, 3/8" x 7/8" x 7/8"
Durable stainless steel exterior
Digital control with freeze and harvest cycle management
The Atosa YRM0600A-261 Modular Half Cube Ice Machine Head
The Atosa YRM0600A-261 is a 30 inch wide modular ice machine head that produces up to 600 lb of half cube ice every 24 hours. It sits on top of an ice storage bin (sold separately, with an optional bin thermostat kit available) and runs on 208-230V single phase power, so it fits bars, restaurants, cafes, and catering operations that go through ice faster than an undercounter unit can keep up. The cabinet measures 30 3/4" wide by 24 1/4" deep by 25 3/4" tall, wears a stainless steel exterior that shrugs off daily wipe-downs, and uses a self-contained air-cooled condensing system charged with R290 refrigerant, so there is no remote compressor to install.
Half Cube Ice Sized for the Glass
Each cube comes out at 3/8" x 7/8" x 7/8", the half-dice size bartenders reach for. Half cubes pack a glass tighter than full cubes, chill drinks quickly, and blend without straining the blender, which makes them a natural fit for soft drinks, mixed cocktails, and iced coffee alike. At 600 lb of production per day, the YRM0600A-261 keeps the bin ahead of demand through a busy service instead of running dry mid-rush.
Digital Controls with a Screwless Front Panel
A digital controller manages the freeze and harvest cycles and gives you a clear readout when you want to check on the machine. When service or cleaning time comes, the screwless front panel comes off without a toolbox hunt, and the removable air filter slides out so you can keep airflow across the condenser strong. A clean filter matters on an air-cooled machine: give the unit room to breathe and keep the condenser clear, and it holds its production rate on hot days. The unit requires a drain connection for the melt water.
Included 3M Water Filter System
Atosa ships a 3M water filter system in the box, something most competing ice machine heads make you buy separately. Filtered water means less scale on the evaporator plate and cleaner tasting, clearer ice in the glass. Plan on a replacement 3M cartridge roughly every 6 months, sooner if your local water runs hard.
About Atosa
Atosa makes commercial kitchen equipment designed to handle the day-to-day demands of professional foodservice. From refrigeration and cooking equipment to prep and holding units, their products are built with reliability and value in mind. Everything is designed, engineered, and tested in-house, giving Atosa tighter control over quality and performance. The brand has won multiple KI Awards for innovations in automation, but what matters most to customers is simple: solid equipment, fair pricing, and strong manufacturer support when it’s needed. That’s why Atosa has become a go-to name for restaurants, chains, and institutions across the country.
Features & Benefits
-
Modular ice machine head for bars, restaurants, and high-volume beverage service; pairs with an ice storage bin (sold separately)
-
High-volume daily production that keeps the storage bin ahead of demand
-
Half cube ice, 3/8" x 7/8" x 7/8"
-
Durable stainless steel exterior
-
Digital control with freeze and harvest cycle management
-
Self-contained, air-cooled condensing unit
-
R290 refrigerant
-
3M water filter system included as standard
-
Removable air filter for easy condenser maintenance
-
Screwless front panel for quick service access
-
Requires a drain connection
-
Optional bin thermostat kit (part BYR0400217031) stops production automatically when the bin is full
Resources & Downloads
See all from Atosa
Specifications
| Ice Type | Half Cube |
| Ice Dimensions | 3/8" x 7/8" x 7/8" |
| Ice Production (lb/24 hr) | 600 |
| Refrigerant | R290 |
| Voltage (V/Hz/Ph) | 208-230/60/1 |
| Rated Current (A) | 6.8 |
| Rated Power (W) | 1500 |
| Plug | NEMA 6-20P |
| Overall Dimensions (W x D x H) | 30 3/4" x 24 1/4" x 25 3/4" |
| Exterior Width | 30 3/4" |
| Exterior Depth | 24 1/4" |
| Exterior Height | 25 3/4" |
| Net Weight (lb) | 170 |
| Exterior Finish | Stainless Steel |
| Condenser Type | Air-Cooled, Self-Contained |
| Control Type | Digital |
| Air Filter | Removable |
| Front Panel | Screwless |
| Water Filter | 3M Water Filter System, Included |
| Drain | Required |
| Optional Bin Thermostat Kit | BYR0400217031 |
Manufacturer's Warranty
-
2 Year
Labor
-
2 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation
-
NSF Approved
Modular ice machine head for bars, restaurants, and high-volume beverage service; pairs with an ice storage bin (sold separately)