The Coldline EIC350BIN Ice Storage Bin
The Coldline EIC350BIN is a 200 lb. ice storage bin built to sit under a Coldline EIC350T-FA or EIC420T-FA modular ice machine head. The bin is the storage half of a modular ice system: the head above makes the ice, and this insulated cabinet below holds the working supply where staff can scoop it all shift. At 22.83 inches wide it matches the EIC series head footprint, and at 43.39 inches tall it puts the head at a comfortable working height once the two are stacked.
200 lb. of Insulated, Sanitary Ice Storage
Foamed-in-place polyurethane fills the bin walls, so harvested ice holds for hours without a refrigeration system of its own; the meltwater that does form runs out the rear drain hole rather than pooling under the fresh supply. The interior liner is smooth polyethylene, a food-safe surface that rinses clean and will not corrode the way bare metal bins eventually do. Between the liner and the stainless steel exterior, the bin is built for years of wet, high-traffic duty.
Spring-Loaded Door for One-Handed Scooping
The front door is spring loaded, so a bartender holding a bucket in one hand can lift it, scoop with the other, and let it close on its own, keeping the stored ice covered and protected from kitchen air except for the seconds someone is actually scooping. An ice scoop is included, along with a hose for the water connection and a drain pipe, so the stack is ready to plumb the day it arrives.
Sized and Fitted for the Coldline EIC Series
The bin accepts the Coldline EIC350T-FA and EIC420T-FA heads directly, no adapter kit required. Six inch adjustable feet level the loaded bin on uneven floors and leave enough clearance underneath to mop, which health inspectors look for. If you are building a modular system around an EIC series head, this is the matching base that completes it.
About Coldline
Coldline manufactures commercial refrigeration equipment designed for the day-to-day demands of foodservice kitchens. With a product line that includes reach-in refrigerators, prep tables, undercounters, and display units, Coldline focuses on reliability, efficient cooling, and service-friendly design. Units are built with stainless steel interiors and exteriors, digital controls, and components that meet NSF and ETL standards. Operators value Coldline’s accessible parts support and straightforward performance across a range of back- and front-of-house applications. Widely used in restaurants, cafes, and convenience operations, Coldline delivers practical refrigeration solutions that keep food safe and service running smoothly.
Features & Benefits
-
Ice storage bin for Coldline EIC350T-FA and EIC420T-FA modular ice machine heads
-
Stores up to 200 pounds of harvested ice
-
Foamed-in-place polyurethane insulation holds ice for hours without power
-
Smooth polyethylene interior is sanitary, corrosion resistant, and easy to clean
-
Stainless steel exterior stands up to daily back of house traffic
-
Spring-loaded front door opens with one hand and closes on its own
-
Rear drain hole carries meltwater away from the stored supply
-
Six inch adjustable feet level the bin and leave mop clearance underneath
-
Ice scoop, water connection hose, and drain pipe included
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Ice storage bin for Coldline EIC350T-FA and EIC420T-FA modular ice machine heads
Stores up to 200 pounds of harvested ice
Foamed-in-place polyurethane insulation holds ice for hours without power
Smooth polyethylene interior is sanitary, corrosion resistant, and easy to clean
Stainless steel exterior stands up to daily back of house traffic
The Coldline EIC350BIN Ice Storage Bin
The Coldline EIC350BIN is a 200 lb. ice storage bin built to sit under a Coldline EIC350T-FA or EIC420T-FA modular ice machine head. The bin is the storage half of a modular ice system: the head above makes the ice, and this insulated cabinet below holds the working supply where staff can scoop it all shift. At 22.83 inches wide it matches the EIC series head footprint, and at 43.39 inches tall it puts the head at a comfortable working height once the two are stacked.
200 lb. of Insulated, Sanitary Ice Storage
Foamed-in-place polyurethane fills the bin walls, so harvested ice holds for hours without a refrigeration system of its own; the meltwater that does form runs out the rear drain hole rather than pooling under the fresh supply. The interior liner is smooth polyethylene, a food-safe surface that rinses clean and will not corrode the way bare metal bins eventually do. Between the liner and the stainless steel exterior, the bin is built for years of wet, high-traffic duty.
Spring-Loaded Door for One-Handed Scooping
The front door is spring loaded, so a bartender holding a bucket in one hand can lift it, scoop with the other, and let it close on its own, keeping the stored ice covered and protected from kitchen air except for the seconds someone is actually scooping. An ice scoop is included, along with a hose for the water connection and a drain pipe, so the stack is ready to plumb the day it arrives.
Sized and Fitted for the Coldline EIC Series
The bin accepts the Coldline EIC350T-FA and EIC420T-FA heads directly, no adapter kit required. Six inch adjustable feet level the loaded bin on uneven floors and leave enough clearance underneath to mop, which health inspectors look for. If you are building a modular system around an EIC series head, this is the matching base that completes it.
About Coldline
Coldline manufactures commercial refrigeration equipment designed for the day-to-day demands of foodservice kitchens. With a product line that includes reach-in refrigerators, prep tables, undercounters, and display units, Coldline focuses on reliability, efficient cooling, and service-friendly design. Units are built with stainless steel interiors and exteriors, digital controls, and components that meet NSF and ETL standards. Operators value Coldline’s accessible parts support and straightforward performance across a range of back- and front-of-house applications. Widely used in restaurants, cafes, and convenience operations, Coldline delivers practical refrigeration solutions that keep food safe and service running smoothly.
Features & Benefits
-
Ice storage bin for Coldline EIC350T-FA and EIC420T-FA modular ice machine heads
-
Stores up to 200 pounds of harvested ice
-
Foamed-in-place polyurethane insulation holds ice for hours without power
-
Smooth polyethylene interior is sanitary, corrosion resistant, and easy to clean
-
Stainless steel exterior stands up to daily back of house traffic
-
Spring-loaded front door opens with one hand and closes on its own
-
Rear drain hole carries meltwater away from the stored supply
-
Six inch adjustable feet level the bin and leave mop clearance underneath
-
Ice scoop, water connection hose, and drain pipe included
Resources & Downloads
See all from Coldline
Specifications
| Exterior Dimensions | 22.83"W x 26.3"D x 43.39"H |
| Packaging Dimensions | 28.19"W x 24.6"D x 40.2"H |
| Unit Weight | 62 lb. |
| Shipping Weight | 71 lb. |
| Bin Storage Capacity | 200 lb. |
| Exterior Material | Stainless Steel |
| Interior Material | Polyethylene |
| Insulation Material | Foamed-in-Place Polyurethane |
| Legs / Feet | 6" Adjustable / Leveling |
| Door Type | Spring Loaded |
| Drain | Rear Drain Hole |
| Compatible Ice Machine Heads | EIC350T-FA, EIC420T-FA |
| Manufacturer Model | HZB-160F-BIN |
| Accessories Included | Ice Scooper, Water Hose, Drain Hose |
Manufacturer's Warranty
-
1 Year
Parts
-
1 Year
Labor
Certifications & Approvals
-
ETL US & Canada
Ice storage bin for Coldline EIC350T-FA and EIC420T-FA modular ice machine heads