The Comstock-Castle FHP30-30 Gas Griddle
The Comstock-Castle FHP30-30 is a 30 inch wide countertop gas griddle from the FHP Series, built in Quincy, Illinois as a restaurant-duty flat top with a 21.25 inch cook depth and a 3/4 inch polished steel plate. It fires four straight burners at 18,000 BTU each, 72,000 BTU total, across 638 square inches of cooking surface, and ships set up for natural gas or propane as you specify.
The FHP Series sits between Comstock-Castle's economy 10 Series and the heavy-duty 32 Series: a thicker plate and more BTU than the economy line, in a 28 inch deep body that matches up with FHP charbroilers and hotplates on the same counter.
3/4 Inch Polished Steel Plate, 30 x 21.25 Inches
The plate is 3/4 inch highly polished steel, 30 inches wide by 21.25 inches deep. A 4 inch splash guard runs the back and sides, with higher sides available, and a front cold zone grease trough with a 3.5 x 1 inch drain slot feeds a seamless, deep, removable grease drawer. A 1 inch plate, chrome plating and grooved surfaces are factory options.
Manual Brass Gas Valves With Standing Pilots
Each burner is set by hand through a brass gas valve with an automatic standing pilot. Nothing to calibrate, nothing to fail but a valve. The FHP30-30T is the same griddle with throttling thermostats. Pressure regulators are factory set for the gas you order, 4 inch WC natural gas or 10 inch WC propane, on a 3/4 inch NPT manifold.
Double Wall Insulated Stainless Steel Body With 4 Inch Bull Nose
Corrosion resistant stainless steel welded over angle iron and aluminized inner framing, with double wall construction and heavy insulation for cooler operation. It stands on heavy duty stainless pipe legs with adjustable feet, and a 4 inch wide stainless bull nose landing across the front protects the controls. Clearance to non-combustible surfaces is zero at the sides and rear; to combustible surfaces it is 4 inches on the sides and 5 inches at the rear.
About Comstock-Castle
Founded in 1838 in Quincy, Illinois, Comstock-Castle is America's oldest stove manufacturer still in operation. The company grew from a frontier hardware shop into a grey-iron foundry that helped make Quincy the nation's stove-production hub by the early 1900s. Seven generations later, Comstock-Castle still designs and union-builds commercial cooking equipment in the same Quincy facility, with ranges, griddles, charbroilers, fryers, and modular cook lines configurable from 24 to 72 inches to match your menu. Built to outlast the kitchens that put them on the line.
Features & Benefits
-
30 inch countertop gas griddle, FHP Series, natural gas or propane (specify at order)
-
Four straight burners at 18,000 BTU each, 72,000 BTU total
-
3/4 inch highly polished steel plate, 30 x 21.25 inch cooking surface (638 sq. in.)
-
1 inch plate, chrome plating and grooved surface available
-
Manual brass gas valves, one per burner
-
Automatic standing pilots
-
Factory set pressure regulator: 4 inch WC natural gas, 10 inch WC propane; 3/4 inch NPT manifold
-
4 inch stainless steel splash guard, higher sides available
-
Front cold zone grease trough with 3.5 x 1 inch drain slot and seamless removable grease drawer
-
Double wall insulated stainless steel body on angle iron and aluminized inner frame
-
Heavy duty stainless steel pipe legs with adjustable feet; 4 inch stainless bull nose landing
-
Zero clearance to non-combustible surfaces; 4 inch sides and 5 inch rear to combustible
-
Matches up with Comstock-Castle FHP charbroilers and hotplates
-
Options: safety pilot controls, gas hoses, carrying handles, knob protectors, matching equipment stands
-
Made in Quincy, Illinois
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
30 inch countertop gas griddle, FHP Series, natural gas or propane (specify at order)
Four straight burners at 18,000 BTU each, 72,000 BTU total
3/4 inch highly polished steel plate, 30 x 21.25 inch cooking surface (638 sq. in.)
1 inch plate, chrome plating and grooved surface available
Manual brass gas valves, one per burner
The Comstock-Castle FHP30-30 Gas Griddle
The Comstock-Castle FHP30-30 is a 30 inch wide countertop gas griddle from the FHP Series, built in Quincy, Illinois as a restaurant-duty flat top with a 21.25 inch cook depth and a 3/4 inch polished steel plate. It fires four straight burners at 18,000 BTU each, 72,000 BTU total, across 638 square inches of cooking surface, and ships set up for natural gas or propane as you specify.
The FHP Series sits between Comstock-Castle's economy 10 Series and the heavy-duty 32 Series: a thicker plate and more BTU than the economy line, in a 28 inch deep body that matches up with FHP charbroilers and hotplates on the same counter.
3/4 Inch Polished Steel Plate, 30 x 21.25 Inches
The plate is 3/4 inch highly polished steel, 30 inches wide by 21.25 inches deep. A 4 inch splash guard runs the back and sides, with higher sides available, and a front cold zone grease trough with a 3.5 x 1 inch drain slot feeds a seamless, deep, removable grease drawer. A 1 inch plate, chrome plating and grooved surfaces are factory options.
Manual Brass Gas Valves With Standing Pilots
Each burner is set by hand through a brass gas valve with an automatic standing pilot. Nothing to calibrate, nothing to fail but a valve. The FHP30-30T is the same griddle with throttling thermostats. Pressure regulators are factory set for the gas you order, 4 inch WC natural gas or 10 inch WC propane, on a 3/4 inch NPT manifold.
Double Wall Insulated Stainless Steel Body With 4 Inch Bull Nose
Corrosion resistant stainless steel welded over angle iron and aluminized inner framing, with double wall construction and heavy insulation for cooler operation. It stands on heavy duty stainless pipe legs with adjustable feet, and a 4 inch wide stainless bull nose landing across the front protects the controls. Clearance to non-combustible surfaces is zero at the sides and rear; to combustible surfaces it is 4 inches on the sides and 5 inches at the rear.
About Comstock-Castle
Founded in 1838 in Quincy, Illinois, Comstock-Castle is America's oldest stove manufacturer still in operation. The company grew from a frontier hardware shop into a grey-iron foundry that helped make Quincy the nation's stove-production hub by the early 1900s. Seven generations later, Comstock-Castle still designs and union-builds commercial cooking equipment in the same Quincy facility, with ranges, griddles, charbroilers, fryers, and modular cook lines configurable from 24 to 72 inches to match your menu. Built to outlast the kitchens that put them on the line.
Features & Benefits
-
30 inch countertop gas griddle, FHP Series, natural gas or propane (specify at order)
-
Four straight burners at 18,000 BTU each, 72,000 BTU total
-
3/4 inch highly polished steel plate, 30 x 21.25 inch cooking surface (638 sq. in.)
-
1 inch plate, chrome plating and grooved surface available
-
Manual brass gas valves, one per burner
-
Automatic standing pilots
-
Factory set pressure regulator: 4 inch WC natural gas, 10 inch WC propane; 3/4 inch NPT manifold
-
4 inch stainless steel splash guard, higher sides available
-
Front cold zone grease trough with 3.5 x 1 inch drain slot and seamless removable grease drawer
-
Double wall insulated stainless steel body on angle iron and aluminized inner frame
-
Heavy duty stainless steel pipe legs with adjustable feet; 4 inch stainless bull nose landing
-
Zero clearance to non-combustible surfaces; 4 inch sides and 5 inch rear to combustible
-
Matches up with Comstock-Castle FHP charbroilers and hotplates
-
Options: safety pilot controls, gas hoses, carrying handles, knob protectors, matching equipment stands
-
Made in Quincy, Illinois
Resources & Downloads
See all from Comstock-Castle
Specifications
| Width | 30" |
| Depth | 28" |
| Cooking Surface Depth | 21.25" |
| Cooking Surface | 638 sq. in. |
| Griddle Plate Thickness | 3/4" |
| Griddle Plate Material | Polished steel |
| Number of Burners | 4 |
| Burner Type | Straight burners |
| Burner Rating | 18,000 BTU each |
| Total BTU | 72,000 |
| Control Type | Manual |
| Gas Type | Natural Gas or Propane, specify at order |
| Gas Connection | 3/4" NPT |
| Ignition | Automatic standing pilot |
| Gas Pressure (Natural) | 4" WC |
| Gas Pressure (Propane) | 10" WC |
| Splash Guard | 4" stainless steel, higher sides available |
| Grease Trough | Front cold zone, 3.5 x 1 in. drain to removable drawer |
| Exterior Finish | Stainless steel |
| Construction | Double wall, insulated; angle iron and aluminized inner frame |
| Legs | Stainless steel pipe legs, adjustable feet |
| Front Landing | 4" stainless steel bull nose |
| Clearance, Non-Combustible | 0" sides, 0" rear |
| Clearance, Combustible | 4" sides, 5" rear |
| Net Weight (approx.) | 275 lbs |
| Country of Origin | USA |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
-
ETL US & Canada
-
Made in USA
30 inch countertop gas griddle, FHP Series, natural gas or propane (specify at order)