Skip to content

Connerton CN36-4-12G 36 In. Gas Range With Griddle Top, 4 Open Burners, 12 In. Griddle, 35,000 BTU Oven

SKUCN36-4-12G BrandConnerton

The Connerton CN36-4-12G Gas Range with Griddle Top

The Connerton CN36-4-12G is a 36 in. wide restaurant gas range with four 32,000 BTU open burners in a two by two block on the left and a 12 in. wide, 1 in. thick polished steel griddle on the right, over a 35,000 BTU Bake n' Roast oven that fits full size sheet pans. It is the burner-heavy split for a neighborhood restaurant, a taqueria, or a pub kitchen that cooks mostly in pans and pots but still wants a strip of flat top for tortillas, grilled cheese, or a quick sear. On a Friday dinner rush of pasta water, pan sauces, and a stock pot of beans the four burners run four independent flames while the plate toasts buns at the end of the line. The 12 in. plate is a one-cook station, so it is not built to carry a full griddle breakfast on its own. It stands on 6 in. adjustable legs, connects to a 3/4 in. or larger gas line with the sized regulator included, and needs 6 in. rear and 10 in. side clearance to combustible walls, or 0 in. against non-combustible surfaces.

Four 32,000 BTU Open Top Burners on Heavy Duty Cast Iron Grates

The left side of the top carries four open burners in a two by two block, each rated at 32,000 BTU, for 128,000 BTU/hr of printed open-burner output. Every burner has its own manual valve on the front panel, so a stock pot can roll at full flame while the pan next to it holds a bare simmer. The burners sit under heavy duty cast iron grates, and the mass of the iron matters: it soaks up heat and keeps radiating into the pan in the seconds after you lift one skillet off and drop a cold one on, which is what shortens recovery between orders. The pilots are flash tube, one pilot per two burners, so the range is not burning a separate standing pilot under every burner all day.

12 In. Wide, 1 In. Thick Highly Polished Steel Griddle Plate

The right side of the top is a 12 in. wide griddle of highly polished 1 in. thick steel plate. A full inch of steel is the reason the surface temperature does not crash when a row of frozen patties or a ladle of batter hits it: the plate stores heat and gives it back to the food while the burners underneath catch up. The griddle burners are rated at 18,000 BTU/hr each. The polished finish means less sticking on eggs and pancakes and a faster scrape-down with a bench scraper at the end of the shift. Connerton lists the 1 in. thick griddle option on this sheet at 12 in. to 36 in. wide, and on this model the 12 in. plate is the printed configuration.

35,000 BTU Bake N' Roast Oven That Fits a Full Size Sheet Pan

Below the top sits a Bake n' Roast oven rated at 35,000 BTU and sized to take a full size sheet pan without turning it, which means trays move straight from the prep table into the oven. It is a standard oven rather than a convection oven, so a sheet pan of potatoes browns from the bottom heat and a pan of braised meat comes out without a fan drying the surface. The oven ships with one rack that can sit in any of three positions, low under a roast or high for a tray of rolls, and an extra rack is listed as an accessory when you want two levels loaded at once. A separate oven control on the front panel sets it independently of the burner valves.

Stainless Steel Front, Sides and Riser With a 12 In. Stub Back and Lift-Off High Shelf

The front, sides and riser are stainless steel, so the surfaces that take the splatter and the wipe-down chemicals are the ones that resist them. A 12 in. stainless steel stub back rises behind the cooking surface to catch what a hard sauté throws backward, and a lift-off high shelf sits on top of it for plates, sheet pans, or spice bins within reach; it lifts off for cleaning or for a low-hood install. Under the burners a full depth, pull out crumb tray collects what falls through the grates, and it slides out from the front so you never have to reach under the top. The range stands on 6 in. stainless steel adjustable legs, and a set of four casters is listed as an accessory. The drawn body is 36 in. wide, 33.9 in. deep including the shelf and rear connection, with the cooking surface at 35 in. and 58.2 in. tall to the top of the high shelf.

3/4 In. Gas Line, Included Pressure Regulator and 6 In. Rear Clearance to Combustibles

Gas comes in through a gas line of 3/4 in. or larger; if you run a flexible connector, its inside diameter has to be 3/4 in. or larger so the burners and oven are not starved at full fire. A pressure regulator sized for this unit is included, and the range runs on 5.0 in. W.C. natural gas or 10.0 in. W.C. propane, so specify the gas type when you order and the altitude if the kitchen sits above 2,000 ft. Set it 6 in. from a combustible wall at the rear and 10 in. at the sides, or 0 in. at both against non-combustible surfaces, run it under a ventilation system that meets NFPA 96, and keep it on the legs or casters supplied so air can reach the burners for proper combustion.

Features & Benefits

  1. Four 32,000 BTU open burners beside a 12 in. griddle for a pan-driven line with a toasting strip
  2. 128,000 BTU/hr of printed open-burner output across 4 independent manual valves
  3. Heavy duty cast iron grates that store heat and keep radiating into a cold pan between drops
  4. 12 in. wide highly polished 1 in. thick steel griddle plate that holds surface heat under a full load
  5. Griddle burners rated at 18,000 BTU/hr each under the polished steel plate
  6. Flash tube pilot system with one pilot serving two burners to cut standing pilot gas use
  7. 35,000 BTU Bake n' Roast oven that takes a full size sheet pan without turning it
  8. One oven rack with three positions, extra rack available as an accessory
  9. Stainless steel front, sides and riser that stand up to splatter and daily wipe-down
  10. 12 in. stainless steel stub back with a lift-off high shelf for plates and sheet pans within reach
  11. Full depth, pull out crumb tray under the grates that slides out from the front
  12. 6 in. stainless steel adjustable legs with a set of four casters available as an accessory
  13. Pressure regulator sized to the unit included, with natural gas or propane specified at order
  14. 0 in. rear and side clearance against non-combustible surfaces for a tight line-up

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$3,881.42
  • Four 32,000 BTU open burners beside a 12 in. griddle for a pan-driven line with a toasting strip
  • 128,000 BTU/hr of printed open-burner output across 4 independent manual valves
  • Heavy duty cast iron grates that store heat and keep radiating into a cold pan between drops
  • 12 in. wide highly polished 1 in. thick steel griddle plate that holds surface heat under a full load
  • Griddle burners rated at 18,000 BTU/hr each under the polished steel plate
  • See full feature list

    The Connerton CN36-4-12G Gas Range with Griddle Top

    The Connerton CN36-4-12G is a 36 in. wide restaurant gas range with four 32,000 BTU open burners in a two by two block on the left and a 12 in. wide, 1 in. thick polished steel griddle on the right, over a 35,000 BTU Bake n' Roast oven that fits full size sheet pans. It is the burner-heavy split for a neighborhood restaurant, a taqueria, or a pub kitchen that cooks mostly in pans and pots but still wants a strip of flat top for tortillas, grilled cheese, or a quick sear. On a Friday dinner rush of pasta water, pan sauces, and a stock pot of beans the four burners run four independent flames while the plate toasts buns at the end of the line. The 12 in. plate is a one-cook station, so it is not built to carry a full griddle breakfast on its own. It stands on 6 in. adjustable legs, connects to a 3/4 in. or larger gas line with the sized regulator included, and needs 6 in. rear and 10 in. side clearance to combustible walls, or 0 in. against non-combustible surfaces.

    Four 32,000 BTU Open Top Burners on Heavy Duty Cast Iron Grates

    The left side of the top carries four open burners in a two by two block, each rated at 32,000 BTU, for 128,000 BTU/hr of printed open-burner output. Every burner has its own manual valve on the front panel, so a stock pot can roll at full flame while the pan next to it holds a bare simmer. The burners sit under heavy duty cast iron grates, and the mass of the iron matters: it soaks up heat and keeps radiating into the pan in the seconds after you lift one skillet off and drop a cold one on, which is what shortens recovery between orders. The pilots are flash tube, one pilot per two burners, so the range is not burning a separate standing pilot under every burner all day.

    12 In. Wide, 1 In. Thick Highly Polished Steel Griddle Plate

    The right side of the top is a 12 in. wide griddle of highly polished 1 in. thick steel plate. A full inch of steel is the reason the surface temperature does not crash when a row of frozen patties or a ladle of batter hits it: the plate stores heat and gives it back to the food while the burners underneath catch up. The griddle burners are rated at 18,000 BTU/hr each. The polished finish means less sticking on eggs and pancakes and a faster scrape-down with a bench scraper at the end of the shift. Connerton lists the 1 in. thick griddle option on this sheet at 12 in. to 36 in. wide, and on this model the 12 in. plate is the printed configuration.

    35,000 BTU Bake N' Roast Oven That Fits a Full Size Sheet Pan

    Below the top sits a Bake n' Roast oven rated at 35,000 BTU and sized to take a full size sheet pan without turning it, which means trays move straight from the prep table into the oven. It is a standard oven rather than a convection oven, so a sheet pan of potatoes browns from the bottom heat and a pan of braised meat comes out without a fan drying the surface. The oven ships with one rack that can sit in any of three positions, low under a roast or high for a tray of rolls, and an extra rack is listed as an accessory when you want two levels loaded at once. A separate oven control on the front panel sets it independently of the burner valves.

    Stainless Steel Front, Sides and Riser With a 12 In. Stub Back and Lift-Off High Shelf

    The front, sides and riser are stainless steel, so the surfaces that take the splatter and the wipe-down chemicals are the ones that resist them. A 12 in. stainless steel stub back rises behind the cooking surface to catch what a hard sauté throws backward, and a lift-off high shelf sits on top of it for plates, sheet pans, or spice bins within reach; it lifts off for cleaning or for a low-hood install. Under the burners a full depth, pull out crumb tray collects what falls through the grates, and it slides out from the front so you never have to reach under the top. The range stands on 6 in. stainless steel adjustable legs, and a set of four casters is listed as an accessory. The drawn body is 36 in. wide, 33.9 in. deep including the shelf and rear connection, with the cooking surface at 35 in. and 58.2 in. tall to the top of the high shelf.

    3/4 In. Gas Line, Included Pressure Regulator and 6 In. Rear Clearance to Combustibles

    Gas comes in through a gas line of 3/4 in. or larger; if you run a flexible connector, its inside diameter has to be 3/4 in. or larger so the burners and oven are not starved at full fire. A pressure regulator sized for this unit is included, and the range runs on 5.0 in. W.C. natural gas or 10.0 in. W.C. propane, so specify the gas type when you order and the altitude if the kitchen sits above 2,000 ft. Set it 6 in. from a combustible wall at the rear and 10 in. at the sides, or 0 in. at both against non-combustible surfaces, run it under a ventilation system that meets NFPA 96, and keep it on the legs or casters supplied so air can reach the burners for proper combustion.

    Features & Benefits

    1. Four 32,000 BTU open burners beside a 12 in. griddle for a pan-driven line with a toasting strip
    2. 128,000 BTU/hr of printed open-burner output across 4 independent manual valves
    3. Heavy duty cast iron grates that store heat and keep radiating into a cold pan between drops
    4. 12 in. wide highly polished 1 in. thick steel griddle plate that holds surface heat under a full load
    5. Griddle burners rated at 18,000 BTU/hr each under the polished steel plate
    6. Flash tube pilot system with one pilot serving two burners to cut standing pilot gas use
    7. 35,000 BTU Bake n' Roast oven that takes a full size sheet pan without turning it
    8. One oven rack with three positions, extra rack available as an accessory
    9. Stainless steel front, sides and riser that stand up to splatter and daily wipe-down
    10. 12 in. stainless steel stub back with a lift-off high shelf for plates and sheet pans within reach
    11. Full depth, pull out crumb tray under the grates that slides out from the front
    12. 6 in. stainless steel adjustable legs with a set of four casters available as an accessory
    13. Pressure regulator sized to the unit included, with natural gas or propane specified at order
    14. 0 in. rear and side clearance against non-combustible surfaces for a tight line-up

    Specifications

    Overall Width36 in.
    Overall Depth33.9 in.
    Overall Height (With High Shelf)58.2 in.
    Height to Cooking Surface35 in.
    Number of Open Burners4
    BTU per Open Burner32,000 BTU/hr
    Open Burner Section (Sum of Printed Ratings)128,000 BTU/hr
    Open Burner LayoutTwo columns of two, left
    Burner TypeOpen top
    Grate MaterialHeavy duty cast iron
    Griddle Width12 in.
    Griddle Plate1 in. thick highly polished steel
    Griddle Burner Rating18,000 BTU/hr per burner
    Number of Ovens1
    Oven TypeBake n' Roast, fits full size sheet pans
    Oven BTU35,000 BTU/hr
    Oven RackOne rack, three positions
    ControlsManual valves per burner, separate oven thermostat dial
    PilotFlash tube, one per two burners
    Gas Line3/4 in. or larger
    Flexible Connector3/4 in. inside diameter or larger
    Gas Pressure (Natural)5.0 in. W.C.
    Gas Pressure (Propane)10.0 in. W.C.
    Gas RegulatorIncluded, sized to the unit
    Gas TypeNatural or Propane, specify at order
    AltitudeSpecify at order if above 2,000 ft
    Body ConstructionStainless steel front, sides and riser
    Stub Back12 in. stainless steel
    High ShelfLift-off
    Crumb TrayFull depth, pull out
    Legs6 in. stainless steel, adjustable
    Clearance, Combustible6 in. rear, 10 in. sides
    Clearance, Non-Combustible0 in. rear and sides
    Griddle Options12 in. to 36 in. wide x 1 in. thick
    AccessoriesCasters (set of four), extra oven rack

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 2 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Connerton CN36-4-12G Gas Range with Griddle Top

    Product Features

    1. Four 32,000 BTU open burners beside a 12 in. griddle for a pan-driven line with a toasting strip
    2. 128,000 BTU/hr of printed open-burner output across 4 independent manual valves
    3. Heavy duty cast iron grates that store heat and keep radiating into a cold pan between drops
    4. 12 in. wide highly polished 1 in. thick steel griddle plate that holds surface heat under a full load
    5. Griddle burners rated at 18,000 BTU/hr each under the polished steel plate
    6. Flash tube pilot system with one pilot serving two burners to cut standing pilot gas use
    7. 35,000 BTU Bake n' Roast oven that takes a full size sheet pan without turning it
    8. One oven rack with three positions, extra rack available as an accessory
    9. Stainless steel front, sides and riser that stand up to splatter and daily wipe-down
    10. 12 in. stainless steel stub back with a lift-off high shelf for plates and sheet pans within reach
    11. Full depth, pull out crumb tray under the grates that slides out from the front
    12. 6 in. stainless steel adjustable legs with a set of four casters available as an accessory
    13. Pressure regulator sized to the unit included, with natural gas or propane specified at order
    14. 0 in. rear and side clearance against non-combustible surfaces for a tight line-up

    Specifications

    Overall Width36 in.
    Overall Depth33.9 in.
    Overall Height (With High Shelf)58.2 in.
    Height to Cooking Surface35 in.
    Number of Open Burners4
    BTU per Open Burner32,000 BTU/hr
    Open Burner Section (Sum of Printed Ratings)128,000 BTU/hr
    Open Burner LayoutTwo columns of two, left
    Burner TypeOpen top
    Grate MaterialHeavy duty cast iron
    Griddle Width12 in.
    Griddle Plate1 in. thick highly polished steel
    Griddle Burner Rating18,000 BTU/hr per burner
    Number of Ovens1
    Oven TypeBake n' Roast, fits full size sheet pans
    Oven BTU35,000 BTU/hr
    Oven RackOne rack, three positions
    ControlsManual valves per burner, separate oven thermostat dial
    PilotFlash tube, one per two burners
    Gas Line3/4 in. or larger
    Flexible Connector3/4 in. inside diameter or larger
    Gas Pressure (Natural)5.0 in. W.C.
    Gas Pressure (Propane)10.0 in. W.C.
    Gas RegulatorIncluded, sized to the unit
    Gas TypeNatural or Propane, specify at order
    AltitudeSpecify at order if above 2,000 ft
    Body ConstructionStainless steel front, sides and riser
    Stub Back12 in. stainless steel
    High ShelfLift-off
    Crumb TrayFull depth, pull out
    Legs6 in. stainless steel, adjustable
    Clearance, Combustible6 in. rear, 10 in. sides
    Clearance, Non-Combustible0 in. rear and sides
    Griddle Options12 in. to 36 in. wide x 1 in. thick
    AccessoriesCasters (set of four), extra oven rack

    Manufacturer's Warranty

      1 year

      Labor

      2 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch