Skip to content

Everest EBGR2 54 In. Bottom Mount Glass Door Reach-In Refrigerator, 2 Low-E Glass Doors, 50 Cu. Ft., Blizzard R290

SKUEBGR2 BrandEverest Refrigeration

The Everest Refrigeration EBGR2 Glass Door Reach-In Refrigerator

The Everest EBGR2 is the full-width two door model and the volume box of Everest's EB Series glass door bottom mount line, built for kitchens, markets and beverage-forward operations that stock 50 cubic feet and want every shelf of it visible without opening a door. Behind two 26 1/2 inch low emissivity double pane glass doors, one open interior carries eight adjustable wire shelves across 54 1/8 inches of wall, so staff confirm stock levels at a glance instead of standing in an open doorway dumping cold air. With the condensing unit mounted below the cabinet instead of on top, the body runs a deeper 33 1/8 inches for full-size sheet pans and bulky product, and full stainless steel construction keeps it a working reach-in rather than a lightweight merchandiser.

Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing

The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge that is fully detachable and replaceable in the field with no on-site brazing. Unlike a conventional sealed system repair that can park a cabinet out of service while a refrigeration tech opens the circuit, a cartridge swap gets the box back to work the same visit. The 1/2 HP cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and an air circulation guard keeps the floor-level vents from being blocked by whatever gets pushed against the cabinet during a busy shift.

Electronically commutated fan motors pull the cabinet to temperature quickly while drawing less power, and the auto defrost cycle starts on a timer and ends on temperature, so it runs only as long as the coil needs. The condensate pan maintains itself with no external drain line or electric heater, which is one less floor penetration in your install. An auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.

Two Low-E Double Pane Glass Doors in Matte Aluminum Frames with Pre-Installed Locks

Each door's low emissivity double glass panes reflect UV rays, so the compressor is not fighting radiant heat through the glass the way it would behind single panes, and the matte finish aluminum frames keep the weight down without giving up rigidity. Both doors self-close through adjustable torsion systems for a positive seal, carry high strength die-cast handles, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.

50 Cu. Ft. Deeper Cabinet Interior Built in Heavy Duty Stainless Steel

Inside there are no dividing walls, just one open 50 cubic foot compartment made deeper than Everest's top mount uprights so bulky product and full-size baking sheet pans fit without diagonal stacking. Eight epoxy coated steel wire shelves, four per section, ride height adjustable stainless steel clips, and the optional sheet pan mounting rack assembly adds support for standard full-size pans. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the cabinet walls. A full-length air duct and airflow guard keep cold air moving through the whole cavity, and shielded LED bar lighting with its own on/off switch gives bright, high color illumination at low heat output, which matters on a glass door unit where the interior doubles as a display. The cabinet rolls on four 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.

Digital Controller that Holds 33°F to 54°F with an Overheat Alarm

A multi-function digital controller with an easy to read LED display ships factory preset at 35°F and adjusts anywhere from 33°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.

If the stock configuration does not match your line, Everest offers additional shelving, a gravity shelf and bottle organizer, the sheet pan mounting rack assembly, a left hinged door, 3 inch locking swivel casters in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.

Keep in mind this is a refrigerator only, holding 33°F to 54°F, and 50 cubic feet behind two full glass doors is built for volume stocking: a single station gets by with the one door version, and walls too tight for 54 1/8 inches take the narrow two door cabinet in the same bottom mount line. A glass door also trades a little insulation for visibility, so product that never needs showing stores just as well behind the solid door cabinets in this family. It runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.

Features & Benefits

  1. Full-width bottom mount glass door reach-in for kitchens and markets stocking at volume
  2. Stores 50 cu. ft. behind two locking 26 1/2 in. low-E glass doors in 54 1/8 in. of wall
  3. Swaps the entire bottom mounted 1/2 HP Blizzard R290 cartridge without on-site brazing
  4. Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
  5. Reflects UV rays through low emissivity double glass panes for efficient cooling
  6. Fits standard full-size sheet pans with an optional mounting rack assembly
  7. Keeps floor-level vents from obstruction with a built-in air circulation guard
  8. Defrosts on a time-initiated, temperature-terminated auto cycle with no operator input
  9. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
  10. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
  11. Lights the display with a shielded LED bar on its own on/off switch at low heat output
  12. Adjusts eight epoxy coated wire shelves on stainless steel height-adjustable clips
  13. Locks both matte aluminum framed doors with pre-installed locks to secure stock overnight
  14. Reverses either door in the field to match your kitchen traffic flow
  15. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$5,148.00
  • Full-width bottom mount glass door reach-in for kitchens and markets stocking at volume
  • Stores 50 cu. ft. behind two locking 26 1/2 in. low-E glass doors in 54 1/8 in. of wall
  • Swaps the entire bottom mounted 1/2 HP Blizzard R290 cartridge without on-site brazing
  • Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
  • Reflects UV rays through low emissivity double glass panes for efficient cooling
  • See full feature list

    The Everest Refrigeration EBGR2 Glass Door Reach-In Refrigerator

    The Everest EBGR2 is the full-width two door model and the volume box of Everest's EB Series glass door bottom mount line, built for kitchens, markets and beverage-forward operations that stock 50 cubic feet and want every shelf of it visible without opening a door. Behind two 26 1/2 inch low emissivity double pane glass doors, one open interior carries eight adjustable wire shelves across 54 1/8 inches of wall, so staff confirm stock levels at a glance instead of standing in an open doorway dumping cold air. With the condensing unit mounted below the cabinet instead of on top, the body runs a deeper 33 1/8 inches for full-size sheet pans and bulky product, and full stainless steel construction keeps it a working reach-in rather than a lightweight merchandiser.

    Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing

    The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge that is fully detachable and replaceable in the field with no on-site brazing. Unlike a conventional sealed system repair that can park a cabinet out of service while a refrigeration tech opens the circuit, a cartridge swap gets the box back to work the same visit. The 1/2 HP cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and an air circulation guard keeps the floor-level vents from being blocked by whatever gets pushed against the cabinet during a busy shift.

    Electronically commutated fan motors pull the cabinet to temperature quickly while drawing less power, and the auto defrost cycle starts on a timer and ends on temperature, so it runs only as long as the coil needs. The condensate pan maintains itself with no external drain line or electric heater, which is one less floor penetration in your install. An auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.

    Two Low-E Double Pane Glass Doors in Matte Aluminum Frames with Pre-Installed Locks

    Each door's low emissivity double glass panes reflect UV rays, so the compressor is not fighting radiant heat through the glass the way it would behind single panes, and the matte finish aluminum frames keep the weight down without giving up rigidity. Both doors self-close through adjustable torsion systems for a positive seal, carry high strength die-cast handles, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.

    50 Cu. Ft. Deeper Cabinet Interior Built in Heavy Duty Stainless Steel

    Inside there are no dividing walls, just one open 50 cubic foot compartment made deeper than Everest's top mount uprights so bulky product and full-size baking sheet pans fit without diagonal stacking. Eight epoxy coated steel wire shelves, four per section, ride height adjustable stainless steel clips, and the optional sheet pan mounting rack assembly adds support for standard full-size pans. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the cabinet walls. A full-length air duct and airflow guard keep cold air moving through the whole cavity, and shielded LED bar lighting with its own on/off switch gives bright, high color illumination at low heat output, which matters on a glass door unit where the interior doubles as a display. The cabinet rolls on four 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.

    Digital Controller that Holds 33°F to 54°F with an Overheat Alarm

    A multi-function digital controller with an easy to read LED display ships factory preset at 35°F and adjusts anywhere from 33°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.

    If the stock configuration does not match your line, Everest offers additional shelving, a gravity shelf and bottle organizer, the sheet pan mounting rack assembly, a left hinged door, 3 inch locking swivel casters in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.

    Keep in mind this is a refrigerator only, holding 33°F to 54°F, and 50 cubic feet behind two full glass doors is built for volume stocking: a single station gets by with the one door version, and walls too tight for 54 1/8 inches take the narrow two door cabinet in the same bottom mount line. A glass door also trades a little insulation for visibility, so product that never needs showing stores just as well behind the solid door cabinets in this family. It runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.

    Features & Benefits

    1. Full-width bottom mount glass door reach-in for kitchens and markets stocking at volume
    2. Stores 50 cu. ft. behind two locking 26 1/2 in. low-E glass doors in 54 1/8 in. of wall
    3. Swaps the entire bottom mounted 1/2 HP Blizzard R290 cartridge without on-site brazing
    4. Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
    5. Reflects UV rays through low emissivity double glass panes for efficient cooling
    6. Fits standard full-size sheet pans with an optional mounting rack assembly
    7. Keeps floor-level vents from obstruction with a built-in air circulation guard
    8. Defrosts on a time-initiated, temperature-terminated auto cycle with no operator input
    9. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
    10. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
    11. Lights the display with a shielded LED bar on its own on/off switch at low heat output
    12. Adjusts eight epoxy coated wire shelves on stainless steel height-adjustable clips
    13. Locks both matte aluminum framed doors with pre-installed locks to secure stock overnight
    14. Reverses either door in the field to match your kitchen traffic flow
    15. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers

    Specifications

    Temp TypeRefrigerator
    Temperature Range33°F to 54°F
    Factory Preset Temperature35°F
    Net Capacity (Cu. Ft.)50
    Door Count2
    Door StyleSwing Glass
    Door GlassLow Emissivity Double Pane, Reflects UV Rays
    Door FrameMatte Finish Aluminum
    Door HandleHigh Strength Die-Cast
    Door LockPre-Installed
    Door HingingField Reversible; Left Hinged Optional
    Door Width26 1/2" Each
    Door GasketSnap-In Magnetic
    Frame HeatersStandard
    Shelves8 Epoxy Coated Steel Wire (4 Per Section)
    Shelf ClipsHeight Adjustable Stainless Steel
    Interior / Exterior FinishHeavy Duty Stainless Steel, Rounded Corners
    Top, Bottom and RearGalvanized Steel
    Insulation2.5" High Density Polyurethane
    LightingShielded LED Bar With On/Off Switch
    RefrigerantR-290
    Compressor HP1/2
    Compressor LocationBottom Mount
    BTU/Hr4,445
    Fan MotorsElectronically Commutated (ECM)
    Condenser and Evaporator CoilsLarge Capacity, Corrosion-Resistant
    Condenser FanHigh Performance, Auto-Reverse
    DefrostAuto, Time-Initiated and Temperature-Terminated
    Air Circulation GuardStandard, Keeps Floor Vents Clear
    Condensate ManagementSelf-Maintaining Drain Pan, No External Drain or Heater
    Pressure Relief DevicesStandard, For Rapid Cabinet Re-Entry
    Overheat AlarmAudible, Compressor and Condenser Coil
    Power (V-Hz-Ph)115-60-1
    Full Load Amps6.5
    NEMA Plug TypeNEMA 5-15P
    Cord Length9 Ft.
    Feed Wires3 With Ground
    CastersFour 5" Swivel, Locks on Front Set
    Leg StabilizersStandard
    Exterior Length54 1/8"
    Exterior Depth33 1/8"
    Depth With Doors Open58 1/2"
    Exterior Height77"
    Overall Height (With 5" Casters)82"
    Crated Weight596 Lbs.
    Optional AccessoriesAdditional Shelving, Gravity Shelf and Bottle Organizer (BO03), Sheet Pan Mounting Rack Assembly (SMRA02-00), Left Hinged Door, 3" Caster Assembly (CASA3-01), 3.5"-6" Interchangeable Legs (AJL03-00)

    Manufacturer's Warranty

    • 10 Year

      Compressor

    • 3 Year

      Labor

    • 3 Year

      Parts

    • 5 Year

      Electrical

    Certifications & Approvals

    • NFS
      NSF Approved
    • CETLUS
      ETL US & Canada
    • ETLSAN
      ETL Sanitation

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Everest Refrigeration EBGR2 Glass Door Reach-In Refrigerator

    Product Features

    1. Full-width bottom mount glass door reach-in for kitchens and markets stocking at volume
    2. Stores 50 cu. ft. behind two locking 26 1/2 in. low-E glass doors in 54 1/8 in. of wall
    3. Swaps the entire bottom mounted 1/2 HP Blizzard R290 cartridge without on-site brazing
    4. Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
    5. Reflects UV rays through low emissivity double glass panes for efficient cooling
    6. Fits standard full-size sheet pans with an optional mounting rack assembly
    7. Keeps floor-level vents from obstruction with a built-in air circulation guard
    8. Defrosts on a time-initiated, temperature-terminated auto cycle with no operator input
    9. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
    10. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
    11. Lights the display with a shielded LED bar on its own on/off switch at low heat output
    12. Adjusts eight epoxy coated wire shelves on stainless steel height-adjustable clips
    13. Locks both matte aluminum framed doors with pre-installed locks to secure stock overnight
    14. Reverses either door in the field to match your kitchen traffic flow
    15. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers

    Specifications

    Temp TypeRefrigerator
    Temperature Range33°F to 54°F
    Factory Preset Temperature35°F
    Net Capacity (Cu. Ft.)50
    Door Count2
    Door StyleSwing Glass
    Door GlassLow Emissivity Double Pane, Reflects UV Rays
    Door FrameMatte Finish Aluminum
    Door HandleHigh Strength Die-Cast
    Door LockPre-Installed
    Door HingingField Reversible; Left Hinged Optional
    Door Width26 1/2" Each
    Door GasketSnap-In Magnetic
    Frame HeatersStandard
    Shelves8 Epoxy Coated Steel Wire (4 Per Section)
    Shelf ClipsHeight Adjustable Stainless Steel
    Interior / Exterior FinishHeavy Duty Stainless Steel, Rounded Corners
    Top, Bottom and RearGalvanized Steel
    Insulation2.5" High Density Polyurethane
    LightingShielded LED Bar With On/Off Switch
    RefrigerantR-290
    Compressor HP1/2
    Compressor LocationBottom Mount
    BTU/Hr4,445
    Fan MotorsElectronically Commutated (ECM)
    Condenser and Evaporator CoilsLarge Capacity, Corrosion-Resistant
    Condenser FanHigh Performance, Auto-Reverse
    DefrostAuto, Time-Initiated and Temperature-Terminated
    Air Circulation GuardStandard, Keeps Floor Vents Clear
    Condensate ManagementSelf-Maintaining Drain Pan, No External Drain or Heater
    Pressure Relief DevicesStandard, For Rapid Cabinet Re-Entry
    Overheat AlarmAudible, Compressor and Condenser Coil
    Power (V-Hz-Ph)115-60-1
    Full Load Amps6.5
    NEMA Plug TypeNEMA 5-15P
    Cord Length9 Ft.
    Feed Wires3 With Ground
    CastersFour 5" Swivel, Locks on Front Set
    Leg StabilizersStandard
    Exterior Length54 1/8"
    Exterior Depth33 1/8"
    Depth With Doors Open58 1/2"
    Exterior Height77"
    Overall Height (With 5" Casters)82"
    Crated Weight596 Lbs.
    Optional AccessoriesAdditional Shelving, Gravity Shelf and Bottle Organizer (BO03), Sheet Pan Mounting Rack Assembly (SMRA02-00), Left Hinged Door, 3" Caster Assembly (CASA3-01), 3.5"-6" Interchangeable Legs (AJL03-00)

    Manufacturer's Warranty

      10 year

      Compressor

      3 year

      Labor

      3 year

      Parts

      5 year

      Electrical

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch