The Everest Refrigeration EBR3 Bottom Mount Reach-in Refrigerator
The Everest EBR3 is the three door flagship of Everest's EB Series bottom mount reach-in line, the box for high-volume kitchens that want maximum cold storage in the bottom-breathing, sheet pan friendly format across 74 3/4 inches of wall. Three solid stainless steel doors open onto one shared 71 cubic foot interior, and with the condensing unit mounted below the cabinet the EBR3 runs a deeper 33 1/8 inch body that swallows bulky product and full-size baking sheet pans. Full stainless steel construction and pre-installed locks on every door make it a working reach-in for banquet prep, bakeries and back-of-house storage at scale.
Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing
The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge that is fully detachable and replaceable in the field with no on-site brazing. Unlike a conventional sealed system repair that can park a cabinet out of service while a refrigeration tech opens the circuit, a cartridge swap gets the box back to work the same visit. One 3/4 HP compressor rated at 4,445 BTU per hour carries all three sections off one standard outlet on a 7.5 amp draw, the cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and an air circulation guard keeps the floor-level vents from being blocked by whatever gets pushed against the cabinet during a busy shift.
Electronically commutated fan motors pull the cabinet to temperature quickly while drawing less power, and the auto defrost cycle starts on a timer and ends on temperature, so it runs only as long as the coil needs. The condensate pan maintains itself with no external drain line or electric heater, which is one less floor penetration in your install. An auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.
Three Solid Stainless Steel Doors with Self-Closing Torsion Hinges and Pre-Installed Locks
Each door is heavy duty stainless steel inside and out with the same 2.5 inch high density polyurethane insulation as the cabinet walls, so a grab from one section never exposes the other two. All three doors self-close through adjustable torsion systems for a positive seal, carry high strength recessed handles that will not catch passing carts, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.
71 Cu. Ft. Deeper Cabinet Interior Built in Heavy Duty Stainless Steel
Inside there are no dividing walls, just one open 71 cubic foot compartment made deeper than Everest's top mount uprights so bulky product and full-size baking sheet pans fit without diagonal stacking. Nine epoxy coated steel wire shelves, three per section, ride height adjustable stainless steel clips, and the optional sheet pan mounting rack assembly adds bottom-support tray slides for standard full-size pans. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the cabinet walls. A full-length air duct and airflow guard keep cold air moving through the whole cavity, and silicone coated, shatter-proof LED lighting gives bright, high color illumination with low heat output. The cabinet rolls on six 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.
Digital Controller that Holds 33°F to 54°F with an Overheat Alarm
A multi-function digital controller with an easy to read LED display ships factory preset at 35°F and adjusts anywhere from 33°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.
If the stock configuration does not match your line, Everest offers additional shelving, the sheet pan mounting rack assembly, a left hinged door, 3 inch locking swivel casters in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.
Keep in mind this is a refrigerator only, holding 33°F to 54°F, and 71 cubic feet across three doors is sized for volume operations: kitchens that do not need a 74 3/4 inch box are better matched by the one and two door siblings in the same bottom mount line. It also runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.
Features & Benefits
-
Three door bottom mount flagship for high-volume kitchens needing sheet pan depth at scale
-
Stores 71 cu. ft. in a deeper 33 1/8 in. cabinet behind three solid locking doors
-
Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
-
Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
-
Fits standard full-size sheet pans with an optional bottom-support mounting rack assembly
-
Runs all three sections on one 3/4 HP compressor and a single standard outlet
-
Keeps floor-level vents from obstruction with a built-in air circulation guard
-
Defrosts on a time-initiated, temperature-terminated auto cycle with no operator input
-
Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
-
Locks all three doors with pre-installed locks to keep stock secure overnight
-
Lights the cavity with silicone coated, shatter-proof LED at low heat output
-
Adjusts nine epoxy coated wire shelves on stainless steel height-adjustable clips
-
Reverses all doors in the field to match your kitchen traffic flow
-
Rolls on six 5 in. swivel casters with front locks and standard leg stabilizers
-
Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Everest Refrigeration EBR3 Bottom Mount Reach-in Refrigerator
The Everest EBR3 is the three door flagship of Everest's EB Series bottom mount reach-in line, the box for high-volume kitchens that want maximum cold storage in the bottom-breathing, sheet pan friendly format across 74 3/4 inches of wall. Three solid stainless steel doors open onto one shared 71 cubic foot interior, and with the condensing unit mounted below the cabinet the EBR3 runs a deeper 33 1/8 inch body that swallows bulky product and full-size baking sheet pans. Full stainless steel construction and pre-installed locks on every door make it a working reach-in for banquet prep, bakeries and back-of-house storage at scale.
Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing
The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge that is fully detachable and replaceable in the field with no on-site brazing. Unlike a conventional sealed system repair that can park a cabinet out of service while a refrigeration tech opens the circuit, a cartridge swap gets the box back to work the same visit. One 3/4 HP compressor rated at 4,445 BTU per hour carries all three sections off one standard outlet on a 7.5 amp draw, the cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and an air circulation guard keeps the floor-level vents from being blocked by whatever gets pushed against the cabinet during a busy shift.
Electronically commutated fan motors pull the cabinet to temperature quickly while drawing less power, and the auto defrost cycle starts on a timer and ends on temperature, so it runs only as long as the coil needs. The condensate pan maintains itself with no external drain line or electric heater, which is one less floor penetration in your install. An auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.
Three Solid Stainless Steel Doors with Self-Closing Torsion Hinges and Pre-Installed Locks
Each door is heavy duty stainless steel inside and out with the same 2.5 inch high density polyurethane insulation as the cabinet walls, so a grab from one section never exposes the other two. All three doors self-close through adjustable torsion systems for a positive seal, carry high strength recessed handles that will not catch passing carts, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.
71 Cu. Ft. Deeper Cabinet Interior Built in Heavy Duty Stainless Steel
Inside there are no dividing walls, just one open 71 cubic foot compartment made deeper than Everest's top mount uprights so bulky product and full-size baking sheet pans fit without diagonal stacking. Nine epoxy coated steel wire shelves, three per section, ride height adjustable stainless steel clips, and the optional sheet pan mounting rack assembly adds bottom-support tray slides for standard full-size pans. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the cabinet walls. A full-length air duct and airflow guard keep cold air moving through the whole cavity, and silicone coated, shatter-proof LED lighting gives bright, high color illumination with low heat output. The cabinet rolls on six 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.
Digital Controller that Holds 33°F to 54°F with an Overheat Alarm
A multi-function digital controller with an easy to read LED display ships factory preset at 35°F and adjusts anywhere from 33°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.
If the stock configuration does not match your line, Everest offers additional shelving, the sheet pan mounting rack assembly, a left hinged door, 3 inch locking swivel casters in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.
Keep in mind this is a refrigerator only, holding 33°F to 54°F, and 71 cubic feet across three doors is sized for volume operations: kitchens that do not need a 74 3/4 inch box are better matched by the one and two door siblings in the same bottom mount line. It also runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.
Features & Benefits
-
Three door bottom mount flagship for high-volume kitchens needing sheet pan depth at scale
-
Stores 71 cu. ft. in a deeper 33 1/8 in. cabinet behind three solid locking doors
-
Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
-
Holds product anywhere from 33°F to 54°F on a digital controller preset at 35°F
-
Fits standard full-size sheet pans with an optional bottom-support mounting rack assembly
-
Runs all three sections on one 3/4 HP compressor and a single standard outlet
-
Keeps floor-level vents from obstruction with a built-in air circulation guard
-
Defrosts on a time-initiated, temperature-terminated auto cycle with no operator input
-
Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
-
Locks all three doors with pre-installed locks to keep stock secure overnight
-
Lights the cavity with silicone coated, shatter-proof LED at low heat output
-
Adjusts nine epoxy coated wire shelves on stainless steel height-adjustable clips
-
Reverses all doors in the field to match your kitchen traffic flow
-
Rolls on six 5 in. swivel casters with front locks and standard leg stabilizers
-
Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed
Resources & Downloads
Specifications
| Temp Type | Refrigerator |
| Temperature Range | 33°F to 54°F |
| Factory Preset Temperature | 35°F |
| Net Capacity (Cu. Ft.) | 71 |
| Door Count | 3 |
| Door Style | Swing Solid |
| Door Construction | Stainless Steel Interior / Exterior, 2.5" Insulation |
| Door Handles | High Strength Recessed |
| Door Locks | Pre-Installed, All Doors |
| Door Hinging | Field Reversible; Left Hinged Optional |
| Door Width | 24 1/4" Each |
| Door Gaskets | Snap-In Magnetic |
| Frame Heaters | Standard |
| Shelves | 9 Epoxy Coated Steel Wire (3 Per Section) |
| Shelf Clips | Height Adjustable Stainless Steel |
| Interior / Exterior Finish | Heavy Duty Stainless Steel, Rounded Corners |
| Top, Bottom and Rear | Galvanized Steel |
| Insulation | 2.5" High Density Polyurethane |
| Lighting | Silicone Coated, Shatter-Proof LED |
| Refrigerant | R-290 |
| Compressor HP | 3/4 |
| Compressor Location | Bottom Mount |
| BTU/Hr | 4,445 |
| Fan Motors | Electronically Commutated (ECM) |
| Condenser and Evaporator Coils | Large Capacity, Corrosion-Resistant |
| Condenser Fan | High Performance, Auto-Reverse |
| Defrost | Auto, Time-Initiated and Temperature-Terminated |
| Air Circulation Guard | Standard, Keeps Floor Vents Clear |
| Condensate Management | Self-Maintaining Drain Pan, No External Drain or Heater |
| Pressure Relief Devices | Standard, For Rapid Cabinet Re-Entry |
| Overheat Alarm | Audible, Compressor and Condenser Coil |
| Power (V-Hz-Ph) | 115-60-1 |
| Full Load Amps | 7.5 |
| NEMA Plug Type | NEMA 5-15P |
| Cord Length | 9 Ft. |
| Feed Wires | 3 With Ground |
| Casters | Six 5" Swivel, Locks on Front Set |
| Leg Stabilizers | Standard |
| Exterior Length | 74 3/4" |
| Exterior Depth | 33 1/8" |
| Depth With Door Open | 56 1/4" |
| Exterior Height | 77" |
| Overall Height (With 5" Casters) | 82" |
| Crated Weight | 680 Lbs. |
| Optional Accessories | Additional Shelving, Sheet Pan Mounting Rack Assembly (SMRA03-00), Left Hinged Door, 3" Caster Assembly (CASA3-02), 3.5"-6" Interchangeable Legs (AJL03-01) |
Manufacturer's Warranty
-
10 Year
Compressor
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Electrical
Certifications & Approvals
-
NSF Approved
-
ETL US & Canada
-
ETL Sanitation

