Skip to content

Everest EBWRFH2 29 In. Bottom Mount Reach-In Dual Temp Refrigerator Freezer, 2 Solid Half Doors, 11 + 11 Cu. Ft., Blizzard R290

SKUEBWRFH2 BrandEverest Refrigeration

The Everest Refrigeration EBWRFH2 Reach In Dual Temperature

The Everest EBWRFH2 packs a refrigerator and a freezer into one 29 1/4 inch wide bottom mount upright, the dual temp option in Everest's EB Series for kitchens that need both temperatures but only have floor space and an outlet for one box. Behind the top half door sits an 11 cubic foot refrigerator compartment, behind the bottom one an 11 cubic foot freezer, each holding its own temperature on its own control, so thawing proteins and frozen backup live in the same footprint without compromise. With the condensing unit mounted below the cabinet the EBWRFH2 also runs the EB line's deeper 33 1/8 inch body, and an optional mounting rack assembly turns that depth into straight-in storage for standard full-size sheet pans.

Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing

The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge, the slide-out cooling unit Everest builds across the EB Series so a failed system is replaced in the field without on-site brazing instead of opening the sealed circuit while the cabinet sits idle. One 1/2 HP compressor rated at 3,435 BTU per hour drives both zones, which means one cord and one cartridge to service rather than the two of everything you would maintain across separate boxes. The cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three.

Electronically commutated fan motors pull both compartments to temperature quickly while drawing less power, and each zone defrosts the way its temperature demands: the freezer runs a time-initiated, temperature-terminated heater cycle while the refrigerator uses simple air defrost. The condensate pan maintains itself with no external drain line or electric heater, an auto-reverse condenser fan supports compressor ventilation and helps keep the coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.

Two Wide Solid Stainless Steel Half Doors with Self-Closing Torsion Hinges and Pre-Installed Locks

Each half door is heavy duty stainless steel inside and out with the same 2.5 inch high density polyurethane insulation as the cabinet walls, so a grab from the refrigerator never vents the freezer below it. Both doors self-close through adjustable torsion systems for a positive seal, carry high strength recessed handles that will not catch passing carts, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.

11 Cu. Ft. Refrigerator over an 11 Cu. Ft. Freezer Split by an Insulated Interior Wall

An insulated interior wall divides the cabinet into two sealed compartments, 11 cubic feet chilled on top and 11 cubic feet frozen below, so neither zone fights the other's temperature. Both compartments run deeper than Everest's top mount uprights, swallowing bulky product and full-size baking sheet pans without diagonal stacking, and the optional sheet pan mounting rack assembly adds bottom-support tray slides for standard full-size pans. Each zone carries an epoxy coated steel wire shelf on height adjustable stainless steel clips. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, 2.5 inch high density polyurethane insulation fills the walls, and silicone coated, shatter-proof LED lighting gives bright, high color illumination with low heat output. The cabinet rolls on four 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.

Independent Digital Controls that Hold 33°F to 54°F Chilled and -10°F to 54°F Frozen

Each compartment runs its own multi-function digital controller with an easy to read LED display: the refrigerator ships preset at 35°F and adjusts from 33°F to 54°F, while the freezer ships preset at -4°F and adjusts from -10°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.

If the stock configuration does not match your line, Everest offers additional shelving, the sheet pan mounting rack assembly, a left hinged door, and height adjustable interchangeable legs from 3.5 to 6 inches.

Keep in mind the even 11 and 11 split is fixed by the insulated wall, so an operation that is mostly chilled storage with a little frozen backup, or the reverse, may be better served by a straight refrigerator or freezer in the same bottom mount line, and kitchens stocking real volume at both temperatures should look at the wider two and three door dual temps in the family. It also runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.

Features & Benefits

  1. Dual temp bottom mount upright for kitchens needing chilled and frozen storage in 29 1/4 in. of wall
  2. Stacks an 11 cu. ft. refrigerator over an 11 cu. ft. freezer split by an insulated interior wall
  3. Holds each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
  4. Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
  5. Runs both zones from one 1/2 HP compressor with a single cord and a single cartridge to service
  6. Fits standard full-size sheet pans with an optional bottom-support mounting rack assembly
  7. Defrosts each zone its own way, heater cycle for the freezer and air defrost for the refrigerator
  8. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
  9. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
  10. Locks both half doors with pre-installed locks to keep stock secure overnight
  11. Lights both compartments with silicone coated, shatter-proof LED at low heat output
  12. Adjusts an epoxy coated wire shelf in each zone on stainless steel clips
  13. Reverses both doors in the field to match your kitchen traffic flow
  14. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers
  15. Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$4,331.00
  • Dual temp bottom mount upright for kitchens needing chilled and frozen storage in 29 1/4 in. of wall
  • Stacks an 11 cu. ft. refrigerator over an 11 cu. ft. freezer split by an insulated interior wall
  • Holds each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
  • Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
  • Runs both zones from one 1/2 HP compressor with a single cord and a single cartridge to service
  • See full feature list

    The Everest Refrigeration EBWRFH2 Reach In Dual Temperature

    The Everest EBWRFH2 packs a refrigerator and a freezer into one 29 1/4 inch wide bottom mount upright, the dual temp option in Everest's EB Series for kitchens that need both temperatures but only have floor space and an outlet for one box. Behind the top half door sits an 11 cubic foot refrigerator compartment, behind the bottom one an 11 cubic foot freezer, each holding its own temperature on its own control, so thawing proteins and frozen backup live in the same footprint without compromise. With the condensing unit mounted below the cabinet the EBWRFH2 also runs the EB line's deeper 33 1/8 inch body, and an optional mounting rack assembly turns that depth into straight-in storage for standard full-size sheet pans.

    Bottom Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing

    The condensing unit is a bottom mounted, self-contained Blizzard R290 cartridge, the slide-out cooling unit Everest builds across the EB Series so a failed system is replaced in the field without on-site brazing instead of opening the sealed circuit while the cabinet sits idle. One 1/2 HP compressor rated at 3,435 BTU per hour drives both zones, which means one cord and one cartridge to service rather than the two of everything you would maintain across separate boxes. The cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three.

    Electronically commutated fan motors pull both compartments to temperature quickly while drawing less power, and each zone defrosts the way its temperature demands: the freezer runs a time-initiated, temperature-terminated heater cycle while the refrigerator uses simple air defrost. The condensate pan maintains itself with no external drain line or electric heater, an auto-reverse condenser fan supports compressor ventilation and helps keep the coil clean between cleanings, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.

    Two Wide Solid Stainless Steel Half Doors with Self-Closing Torsion Hinges and Pre-Installed Locks

    Each half door is heavy duty stainless steel inside and out with the same 2.5 inch high density polyurethane insulation as the cabinet walls, so a grab from the refrigerator never vents the freezer below it. Both doors self-close through adjustable torsion systems for a positive seal, carry high strength recessed handles that will not catch passing carts, and come with pre-installed locks so stock stays put overnight. Frame heaters prevent exterior moisture build up on humid days, the snap-in magnetic gaskets pop out for cleaning or replacement without tools, and the doors are field reversible if your traffic flow runs the other way.

    11 Cu. Ft. Refrigerator over an 11 Cu. Ft. Freezer Split by an Insulated Interior Wall

    An insulated interior wall divides the cabinet into two sealed compartments, 11 cubic feet chilled on top and 11 cubic feet frozen below, so neither zone fights the other's temperature. Both compartments run deeper than Everest's top mount uprights, swallowing bulky product and full-size baking sheet pans without diagonal stacking, and the optional sheet pan mounting rack assembly adds bottom-support tray slides for standard full-size pans. Each zone carries an epoxy coated steel wire shelf on height adjustable stainless steel clips. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the top, bottom and rear are galvanized steel, 2.5 inch high density polyurethane insulation fills the walls, and silicone coated, shatter-proof LED lighting gives bright, high color illumination with low heat output. The cabinet rolls on four 5 inch swivel casters with locks on the front set, and leg stabilizers come standard.

    Independent Digital Controls that Hold 33°F to 54°F Chilled and -10°F to 54°F Frozen

    Each compartment runs its own multi-function digital controller with an easy to read LED display: the refrigerator ships preset at 35°F and adjusts from 33°F to 54°F, while the freezer ships preset at -4°F and adjusts from -10°F to 54°F. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.

    If the stock configuration does not match your line, Everest offers additional shelving, the sheet pan mounting rack assembly, a left hinged door, and height adjustable interchangeable legs from 3.5 to 6 inches.

    Keep in mind the even 11 and 11 split is fixed by the insulated wall, so an operation that is mostly chilled storage with a little frozen backup, or the reverse, may be better served by a straight refrigerator or freezer in the same bottom mount line, and kitchens stocking real volume at both temperatures should look at the wider two and three door dual temps in the family. It also runs taller than a top mount upright, standing 82 inches on its casters. Power is a standard 115V connection on a 9 foot cord, with no dedicated high-voltage circuit needed.

    Features & Benefits

    1. Dual temp bottom mount upright for kitchens needing chilled and frozen storage in 29 1/4 in. of wall
    2. Stacks an 11 cu. ft. refrigerator over an 11 cu. ft. freezer split by an insulated interior wall
    3. Holds each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
    4. Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
    5. Runs both zones from one 1/2 HP compressor with a single cord and a single cartridge to service
    6. Fits standard full-size sheet pans with an optional bottom-support mounting rack assembly
    7. Defrosts each zone its own way, heater cycle for the freezer and air defrost for the refrigerator
    8. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
    9. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
    10. Locks both half doors with pre-installed locks to keep stock secure overnight
    11. Lights both compartments with silicone coated, shatter-proof LED at low heat output
    12. Adjusts an epoxy coated wire shelf in each zone on stainless steel clips
    13. Reverses both doors in the field to match your kitchen traffic flow
    14. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers
    15. Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed

    Specifications

    Temp TypeDual Temperature (Refrigerator + Freezer)
    Refrigerator Temperature Range33°F to 54°F
    Refrigerator Factory Preset35°F
    Freezer Temperature Range-10°F to 54°F
    Freezer Factory Preset-4°F
    Refrigerator Net Capacity (Cu. Ft.)11
    Freezer Net Capacity (Cu. Ft.)11
    Compartment LayoutRefrigerator Top / Freezer Bottom
    Compartment DividerInsulated Interior Wall
    Door Count2 Half Doors
    Door StyleSwing Solid, Wide Half Doors
    Door ConstructionStainless Steel Interior / Exterior, 2.5" Insulation
    Door HandlesHigh Strength Recessed
    Door LocksPre-Installed, Both Doors
    Door HingingField Reversible; Left Hinged Optional
    Door Width28 3/4"
    Door GasketsSnap-In Magnetic
    Frame HeatersStandard
    Shelves2 Epoxy Coated Steel Wire (1 Per Zone)
    Shelf ClipsHeight Adjustable Stainless Steel
    Interior / Exterior FinishHeavy Duty Stainless Steel, Rounded Corners
    Top, Bottom and RearGalvanized Steel
    Insulation2.5" High Density Polyurethane
    LightingSilicone Coated, Shatter-Proof LED
    RefrigerantR-290
    Compressor HP1/2
    Compressor LocationBottom Mount
    BTU/Hr3,435
    Fan MotorsElectronically Commutated (ECM)
    Condenser and Evaporator CoilsLarge Capacity, Corrosion-Resistant
    Condenser FanHigh Performance, Auto-Reverse
    DefrostHeater (Freezer, Time-Initiated / Temperature-Terminated); Air (Refrigerator)
    Condensate ManagementSelf-Maintaining Drain Pan, No External Drain or Heater
    Pressure Relief DevicesStandard, For Rapid Cabinet Re-Entry
    Overheat AlarmAudible, Compressor and Condenser Coil
    Power (V-Hz-Ph)115-60-1
    Full Load Amps5
    NEMA Plug TypeNEMA 5-15P
    Cord Length9 Ft.
    Feed Wires3 With Ground
    CastersFour 5" Swivel, Locks on Front Set
    Leg StabilizersStandard
    Exterior Length29 1/4"
    Exterior Depth33 1/8"
    Depth With Door Open60 3/4"
    Exterior Height77"
    Overall Height (With 5" Casters)82"
    Crated Weight341 Lbs.
    Optional AccessoriesAdditional Shelving, Sheet Pan Mounting Rack Assembly (SMRA01-00), Left Hinged Door, 3.5"-6" Interchangeable Legs (AJL03-00)

    Manufacturer's Warranty

    • 10 Year

      Compressor

    • 3 Year

      Labor

    • 3 Year

      Parts

    • 5 Year

      Electrical

    Certifications & Approvals

    • NFS
      NSF Approved
    • CETLUS
      ETL US & Canada
    • ETLSAN
      ETL Sanitation

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Everest Refrigeration EBWRFH2 Reach In Dual Temperature

    Product Features

    1. Dual temp bottom mount upright for kitchens needing chilled and frozen storage in 29 1/4 in. of wall
    2. Stacks an 11 cu. ft. refrigerator over an 11 cu. ft. freezer split by an insulated interior wall
    3. Holds each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
    4. Swaps the entire bottom mounted Blizzard R290 cartridge in the field without on-site brazing
    5. Runs both zones from one 1/2 HP compressor with a single cord and a single cartridge to service
    6. Fits standard full-size sheet pans with an optional bottom-support mounting rack assembly
    7. Defrosts each zone its own way, heater cycle for the freezer and air defrost for the refrigerator
    8. Cuts energy draw with ECM fan motors and a self-maintaining condensate pan
    9. Seals each swing with self-closing adjustable torsion systems and snap-in magnetic gaskets
    10. Locks both half doors with pre-installed locks to keep stock secure overnight
    11. Lights both compartments with silicone coated, shatter-proof LED at low heat output
    12. Adjusts an epoxy coated wire shelf in each zone on stainless steel clips
    13. Reverses both doors in the field to match your kitchen traffic flow
    14. Rolls on four 5 in. swivel casters with front locks and standard leg stabilizers
    15. Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed

    Specifications

    Temp TypeDual Temperature (Refrigerator + Freezer)
    Refrigerator Temperature Range33°F to 54°F
    Refrigerator Factory Preset35°F
    Freezer Temperature Range-10°F to 54°F
    Freezer Factory Preset-4°F
    Refrigerator Net Capacity (Cu. Ft.)11
    Freezer Net Capacity (Cu. Ft.)11
    Compartment LayoutRefrigerator Top / Freezer Bottom
    Compartment DividerInsulated Interior Wall
    Door Count2 Half Doors
    Door StyleSwing Solid, Wide Half Doors
    Door ConstructionStainless Steel Interior / Exterior, 2.5" Insulation
    Door HandlesHigh Strength Recessed
    Door LocksPre-Installed, Both Doors
    Door HingingField Reversible; Left Hinged Optional
    Door Width28 3/4"
    Door GasketsSnap-In Magnetic
    Frame HeatersStandard
    Shelves2 Epoxy Coated Steel Wire (1 Per Zone)
    Shelf ClipsHeight Adjustable Stainless Steel
    Interior / Exterior FinishHeavy Duty Stainless Steel, Rounded Corners
    Top, Bottom and RearGalvanized Steel
    Insulation2.5" High Density Polyurethane
    LightingSilicone Coated, Shatter-Proof LED
    RefrigerantR-290
    Compressor HP1/2
    Compressor LocationBottom Mount
    BTU/Hr3,435
    Fan MotorsElectronically Commutated (ECM)
    Condenser and Evaporator CoilsLarge Capacity, Corrosion-Resistant
    Condenser FanHigh Performance, Auto-Reverse
    DefrostHeater (Freezer, Time-Initiated / Temperature-Terminated); Air (Refrigerator)
    Condensate ManagementSelf-Maintaining Drain Pan, No External Drain or Heater
    Pressure Relief DevicesStandard, For Rapid Cabinet Re-Entry
    Overheat AlarmAudible, Compressor and Condenser Coil
    Power (V-Hz-Ph)115-60-1
    Full Load Amps5
    NEMA Plug TypeNEMA 5-15P
    Cord Length9 Ft.
    Feed Wires3 With Ground
    CastersFour 5" Swivel, Locks on Front Set
    Leg StabilizersStandard
    Exterior Length29 1/4"
    Exterior Depth33 1/8"
    Depth With Door Open60 3/4"
    Exterior Height77"
    Overall Height (With 5" Casters)82"
    Crated Weight341 Lbs.
    Optional AccessoriesAdditional Shelving, Sheet Pan Mounting Rack Assembly (SMRA01-00), Left Hinged Door, 3.5"-6" Interchangeable Legs (AJL03-00)

    Manufacturer's Warranty

      10 year

      Compressor

      3 year

      Labor

      3 year

      Parts

      5 year

      Electrical

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch