Everest ETBF2 48 In. Back Mount Undercounter Freezer, 2 Solid Doors, 14 Cu. Ft., 16 Gauge Stainless Steel Worktop

The Everest ETBF2 is the mid-size two door workhorse of Everest's ETB Series of back mount undercounter freezers, pairing 14 cubic feet of frozen storage with two wide 22 3/4 inch doors that pass bulk boxes and bagged product without a fight. A two-station line keeps fryer backup, frozen proteins, and dessert stock at arm's reach instead of walking to a reach-in, and the 16 gauge stainless steel worktop turns the 47 1/2 inch top into working counter space. Because the condensing unit breathes from the front, the cabinet sits flush against walls and under counters without starving the compressor for air.

Back Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing

The condensing unit is a back mounted, self-contained Blizzard R290 cartridge that is fully detachable and replaceable in the field with no on-site brazing. Unlike a conventional sealed system repair that can park a cabinet out of service while a tech opens the refrigerant circuit, a cartridge swap gets the box back to work the same visit. The cartridge runs natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and the unit arrives pre-wired and ready to plug in on a standard 115V circuit.

Electronically commutated fan motors pull the cabinet down to temperature quickly while drawing less power, and a full-length air duct with an airflow guard keeps cold air circulating through the whole cavity. The auto defrost cycle starts on a timer, ends on temperature, and uses a defrost heater to clear the coil at freezer temperatures without operator input. A self-maintaining condensate pan needs no external drain line or electric heater, the auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.

Two Wide Solid Stainless Steel Doors with Pre-Installed Locks

Each 22 3/4 inch wide door is heavy duty stainless steel inside and out, filled with the same 2.5 inch high density polyurethane insulation as the cabinet walls, and wide enough that bulk containers load straight in without tilting. The doors self-close through an adjustable torsion system for a positive seal, and the snap-in magnetic gaskets pop out for cleaning or replacement without tools. Frame heaters stop exterior moisture build up around each opening even at freezer temperatures, the recessed handles stay out of the walkway, and the pre-installed locks keep stock secure overnight.

14 Cu. Ft. Open Interior Under a 16 Gauge Stainless Steel Worktop

Behind the two doors is one open cavity with no dividing wall, so long boxes slide across the full width while four epoxy coated steel wire shelves, two behind each door, ride on height adjustable stainless steel clips. The interior and exterior are heavy duty stainless steel with rounded corners that will not snag knuckles or towels, the bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the walls. The cabinet body stands 30 1/4 inches tall, or 35 1/4 inches on its four 5 inch swivel casters with locks on the front set, so it rolls out for cleaning and locks in place during service.

Digital Controller that Holds -10°F to 54°F with an Overheat Alarm

A multi-function digital controller with an easy to read LED display ships factory preset at -4°F and adjusts anywhere from -10°F to 54°F, so frozen stock stays hard through door swings at the height of service. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.

If the stock setup does not match your station, Everest offers additional shelving, a 4 inch high stainless steel backsplash (47 1/2 inches long) for worktop applications, a stainless steel double overshelf that adds two raised 47 by 13.5 inch shelves and 31 inches of height, a 3 inch caster assembly in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.

Keep in mind this is a freezer built to hold product at its -4°F factory preset; if your station only needs chilled storage above freezing, the matching solid door refrigerator version of this cabinet covers that job. Within the freezer series, the narrower ETBSF2 splits less capacity behind two shorter doors where aisle space is tight, while the wider two and three door siblings add capacity when 14 cubic feet runs out. On its standard casters the unit stands 35 1/4 inches overall, so verify your counter clearance and use the optional 3 inch casters or adjustable legs where the line runs lower. Power is a standard 115V connection drawing 4.5 amps on a 9 foot cord, with no dedicated circuit needed.