The Everest Refrigeration ETRF3 Undercounter Refrigerator And Freezer
The Everest ETRF3 is the three door flagship of Everest's ET Series side mount undercounter dual temps, giving a long line a 14 cubic foot refrigerator behind two doors and a 9 cubic foot freezer behind a third, all in one 71 1/8 inch cabinet on one outlet. The two to one split fits operations that pull mostly chilled prep with a steady draw of frozen backup, so the station stops running a separate freezer for a few cases of stock. The 16 gauge stainless steel worktop turns nearly six feet of top into counter space, and the condensing unit is mounted at the left end where it breathes through the front grille, so the cabinet backs up flush to a wall.
Side Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing
The condensing unit is a side mounted, self-contained Blizzard R290 cartridge housed at the left end of the cabinet, and Everest's slide-out cartridge design lets a tech replace the entire cooling system without on-site brazing, so a sealed system problem does not park the box for days. One 1/2 horsepower compressor rated at 3,435 BTU per hour serves both zones, running natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and the unit arrives pre-wired and ready to plug in on a standard 115V circuit.
Electronically commutated fan motors pull both zones down to temperature while drawing less power, and each side defrosts the way its temperature demands: the refrigerator uses air defrost while the freezer runs a time-initiated, temperature-terminated defrost heater. A self-maintaining condensate pan needs no external drain line or electric heater, the auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.
One Freezer Door Beside Two Refrigerator Doors, All with Pre-Installed Locks
The freezer sits behind the 22 3/4 inch door at the left end next to the compressor housing, and the refrigerator spans the two 17 inch doors to the right, so two cooks can work the chilled side while a third pulls frozen stock without anyone trading places. All three doors are heavy duty stainless steel inside and out with 2.5 inch high density polyurethane insulation, self-close through an adjustable torsion system, and carry snap-in magnetic gaskets that pop out for cleaning without tools. Frame heaters stop exterior moisture build up around the openings, the recessed handles stay out of the walkway, and the pre-installed locks keep stock secure overnight.
14 Cu. Ft. Refrigerator Beside a 9 Cu. Ft. Freezer Split by an Insulated Interior Wall
An insulated interior wall seals the freezer off from the two-door refrigerator cavity, and six epoxy coated steel wire shelves, two per section, ride on height adjustable stainless steel clips. Silicone coated, shatter-proof LED lighting throws bright, high color light through the compartments while adding almost no heat. The interior and exterior are heavy duty stainless steel with rounded corners, the bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the walls. The cabinet body stands 29 1/4 inches tall, or 34 1/4 inches on its four 5 inch swivel casters with locks on the front set, so it rolls out for cleaning and locks in place during service.
Independent Digital Controls that Hold 33°F to 54°F Chilled and -10°F to 54°F Frozen
Each zone runs its own multi-function digital controller with an easy to read LED display, stacked above the front grille. The refrigerator side ships preset at 35°F and adjusts from 33°F to 54°F, while the freezer side ships at -4°F and adjusts from -10°F to 54°F, so one zone can be tuned for delicate produce while the other holds ice cream hard. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.
If the stock setup does not match your station, Everest offers additional shelving, a 4 inch high stainless steel backsplash (71 inches long) for worktop applications, a stainless steel double overshelf that adds two raised 69 by 13.5 inch shelves and 31 inches of height, a 3 inch caster assembly in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.
Keep in mind the split is fixed at 14 cubic feet chilled to 9 frozen, so an operation that needs equal halves is better matched by the two door ETRF2 in the same family, and a single-temperature station gets more usable space from the straight refrigerator or freezer undercounters. At 71 1/8 inches this is the longest dual temp in the lineup, so measure the straight run before committing. On its standard casters the unit stands 34 1/4 inches overall, so verify your counter clearance and use the optional 3 inch casters or adjustable legs where the line runs lower. Power is a standard 115V connection drawing 7.77 amps on a 9 foot cord, with no dedicated circuit needed.
Features & Benefits
-
Chilled and frozen storage for long lines that pull mostly prep with steady frozen backup
-
Splits 14 cu. ft. of refrigeration behind two doors from 9 cu. ft. of freezing behind one
-
Swaps the entire side mounted Blizzard R290 cartridge without on-site brazing
-
Tunes each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
-
Doubles as a tabletop workspace with a 16 gauge high quality stainless steel worktop
-
Defrosts each side its own way, air for the refrigerator and a heater cycle for the freezer
-
Seals the zones apart with an insulated interior wall between compartments
-
Lights the compartments with silicone coated, shatter-proof LED strips with low heat output
-
Cuts energy draw with ECM fan motors on a single 1/2 HP side mounted cartridge
-
Drains condensate into a self-maintaining pan with no external drain or electric heater
-
Seals each swing with self-closing doors, adjustable torsion, and snap-in magnetic gaskets
-
Adjusts six epoxy coated wire shelves on height adjustable stainless steel clips
-
Rolls on four 5 in. swivel casters with locks on the front set
-
Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Everest Refrigeration ETRF3 Undercounter Refrigerator And Freezer
The Everest ETRF3 is the three door flagship of Everest's ET Series side mount undercounter dual temps, giving a long line a 14 cubic foot refrigerator behind two doors and a 9 cubic foot freezer behind a third, all in one 71 1/8 inch cabinet on one outlet. The two to one split fits operations that pull mostly chilled prep with a steady draw of frozen backup, so the station stops running a separate freezer for a few cases of stock. The 16 gauge stainless steel worktop turns nearly six feet of top into counter space, and the condensing unit is mounted at the left end where it breathes through the front grille, so the cabinet backs up flush to a wall.
Side Mounted Blizzard R290 Cartridge that Swaps without On-Site Brazing
The condensing unit is a side mounted, self-contained Blizzard R290 cartridge housed at the left end of the cabinet, and Everest's slide-out cartridge design lets a tech replace the entire cooling system without on-site brazing, so a sealed system problem does not park the box for days. One 1/2 horsepower compressor rated at 3,435 BTU per hour serves both zones, running natural R290 refrigerant with zero ozone depletion potential and a global warming potential of three, and the unit arrives pre-wired and ready to plug in on a standard 115V circuit.
Electronically commutated fan motors pull both zones down to temperature while drawing less power, and each side defrosts the way its temperature demands: the refrigerator uses air defrost while the freezer runs a time-initiated, temperature-terminated defrost heater. A self-maintaining condensate pan needs no external drain line or electric heater, the auto-reverse condenser fan supports compressor ventilation and helps keep the condenser coil clean, and pressure relief devices let staff re-open a just-closed door instead of waiting out the vacuum.
One Freezer Door Beside Two Refrigerator Doors, All with Pre-Installed Locks
The freezer sits behind the 22 3/4 inch door at the left end next to the compressor housing, and the refrigerator spans the two 17 inch doors to the right, so two cooks can work the chilled side while a third pulls frozen stock without anyone trading places. All three doors are heavy duty stainless steel inside and out with 2.5 inch high density polyurethane insulation, self-close through an adjustable torsion system, and carry snap-in magnetic gaskets that pop out for cleaning without tools. Frame heaters stop exterior moisture build up around the openings, the recessed handles stay out of the walkway, and the pre-installed locks keep stock secure overnight.
14 Cu. Ft. Refrigerator Beside a 9 Cu. Ft. Freezer Split by an Insulated Interior Wall
An insulated interior wall seals the freezer off from the two-door refrigerator cavity, and six epoxy coated steel wire shelves, two per section, ride on height adjustable stainless steel clips. Silicone coated, shatter-proof LED lighting throws bright, high color light through the compartments while adding almost no heat. The interior and exterior are heavy duty stainless steel with rounded corners, the bottom and rear are galvanized steel, and 2.5 inch high density polyurethane insulation fills the walls. The cabinet body stands 29 1/4 inches tall, or 34 1/4 inches on its four 5 inch swivel casters with locks on the front set, so it rolls out for cleaning and locks in place during service.
Independent Digital Controls that Hold 33°F to 54°F Chilled and -10°F to 54°F Frozen
Each zone runs its own multi-function digital controller with an easy to read LED display, stacked above the front grille. The refrigerator side ships preset at 35°F and adjusts from 33°F to 54°F, while the freezer side ships at -4°F and adjusts from -10°F to 54°F, so one zone can be tuned for delicate produce while the other holds ice cream hard. An audible overheat alarm watches the compressor and condenser coil and sounds before a developing problem turns into lost product. Everest backs the unit with 3 year parts and labor, 5 year electrical, and 10 year compressor coverage, supported through its service agent network.
If the stock setup does not match your station, Everest offers additional shelving, a 4 inch high stainless steel backsplash (71 inches long) for worktop applications, a stainless steel double overshelf that adds two raised 69 by 13.5 inch shelves and 31 inches of height, a 3 inch caster assembly in place of the standard 5 inch set, and height adjustable interchangeable legs from 3.5 to 6 inches.
Keep in mind the split is fixed at 14 cubic feet chilled to 9 frozen, so an operation that needs equal halves is better matched by the two door ETRF2 in the same family, and a single-temperature station gets more usable space from the straight refrigerator or freezer undercounters. At 71 1/8 inches this is the longest dual temp in the lineup, so measure the straight run before committing. On its standard casters the unit stands 34 1/4 inches overall, so verify your counter clearance and use the optional 3 inch casters or adjustable legs where the line runs lower. Power is a standard 115V connection drawing 7.77 amps on a 9 foot cord, with no dedicated circuit needed.
Features & Benefits
-
Chilled and frozen storage for long lines that pull mostly prep with steady frozen backup
-
Splits 14 cu. ft. of refrigeration behind two doors from 9 cu. ft. of freezing behind one
-
Swaps the entire side mounted Blizzard R290 cartridge without on-site brazing
-
Tunes each zone on its own digital controller, 33°F to 54°F chilled and -10°F to 54°F frozen
-
Doubles as a tabletop workspace with a 16 gauge high quality stainless steel worktop
-
Defrosts each side its own way, air for the refrigerator and a heater cycle for the freezer
-
Seals the zones apart with an insulated interior wall between compartments
-
Lights the compartments with silicone coated, shatter-proof LED strips with low heat output
-
Cuts energy draw with ECM fan motors on a single 1/2 HP side mounted cartridge
-
Drains condensate into a self-maintaining pan with no external drain or electric heater
-
Seals each swing with self-closing doors, adjustable torsion, and snap-in magnetic gaskets
-
Adjusts six epoxy coated wire shelves on height adjustable stainless steel clips
-
Rolls on four 5 in. swivel casters with locks on the front set
-
Plugs in pre-wired and ready to run on a 9 ft cord, no electrician needed
Resources & Downloads
Specifications
| Temp Type | Dual Temperature |
| Refrigerator Temperature Range | 33°F to 54°F |
| Refrigerator Factory Preset | 35°F |
| Freezer Temperature Range | -10°F to 54°F |
| Freezer Factory Preset | -4°F |
| Net Capacity (Cu. Ft.) | 14 (Refrigerator), 9 (Freezer) |
| Zone Separation | Insulated Interior Wall |
| Door Count | 3 (2 Refrigerator, 1 Freezer) |
| Door Style | Swing Solid |
| Door Width | 22 3/4" (Freezer), 17" Each (Refrigerator) |
| Door Features | Self-Closing, Recessed Handles, Pre-Installed Locks |
| Door Gaskets | Snap-In Magnetic |
| Frame Heaters | Standard |
| Shelves | 6 Epoxy Coated Steel Wire (2 Per Section) |
| Shelf Clips | Height Adjustable Stainless Steel |
| Lighting | Silicone Coated, Shatter-Proof LED |
| Worktop | 16 Gauge Stainless Steel |
| Interior / Exterior Finish | Heavy Duty Stainless Steel, Rounded Corners |
| Bottom and Rear | Galvanized Steel |
| Insulation | 2.5" High Density Polyurethane (Cabinet and Doors) |
| Refrigerant | R-290 |
| Compressor HP | 1/2 |
| Compressor Location | Side Mount |
| BTU/Hr | 3,435 |
| Fan Motors | Electronically Commutated (ECM) |
| Condenser and Evaporator Coils | Large Capacity, Corrosion-Resistant |
| Condenser Fan | High Performance, Auto-Reverse |
| Defrost (Refrigerator) | Air Defrost |
| Defrost (Freezer) | Auto, Time-Initiated and Temperature-Terminated Heater |
| Condensate Management | Self-Maintaining Drain Pan, No External Drain or Heater |
| Pressure Relief Devices | Standard, For Rapid Cabinet Re-Entry |
| Overheat Alarm | Audible, Compressor and Condenser Coil |
| Power (V-Hz-Ph) | 115-60-1 |
| Full Load Amps | 7.77 |
| NEMA Plug Type | NEMA 5-15P |
| Cord Length | 9 Ft. |
| Feed Wires | 3 With Ground |
| Casters | Four 5" Swivel, Locks on Front Set |
| Exterior Length | 71 1/8" |
| Exterior Depth | 31 1/2" |
| Depth With Doors Open | 52 3/4" |
| Exterior Height | 29 1/4" |
| Overall Height (With 5" Casters) | 34 1/4" |
| Crated Weight | 356 Lbs. |
| Optional Accessories | Additional Shelving, 4" Stainless Steel Backsplash (BKSPL04-00), Double Overshelf (OS28-00), 3" Caster Assembly (CASA3-01), 3.5"-6" Interchangeable Legs (AJL03-00) |
Manufacturer's Warranty
-
10 Year
Compressor
-
3 Year
Labor
-
3 Year
Parts
-
5 Year
Electrical
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

