The Excellence Industries MCSC-16 Milk Cooler
The Excellence Industries MCSC-16 is a school milk crate cooler that holds 16 standard 13 x 13 x 11 inch crates, roughly 1024 half-pint cartons, at dairy-safe temperature through a lunch rush. Cafeterias load it from the top through a stainless steel locking lid, and students serve themselves through the front stainless doors without a staff member standing guard.
16 Crates on Floor Racks, Two Ways In
Floor racks keep the bottom crates off the cabinet floor where condensation pools, and the reinforced interior base is built for the daily slam of full milk crates. The top lid takes the morning dairy delivery a full crate at a time; the front stainless steel doors put cartons at kid height for the serving line.
Cold Wall Plus a Heavy Duty Fan at +32°F to +38°F
A cold wall evaporator carries the base load while a heavy duty fan motor circulates air through the crate stack, holding +32°F to +38°F even with the doors cycling every few seconds during service. The electronic thermostat with digital LED display gives the kitchen manager a temperature check at a glance, which makes the health inspector's log a one-look job.
Built for a Decade of School Years
The interior is stainless steel, the lid and doors are stainless steel, and the serviceable parts sit behind one-screw quick access panels so maintenance staff can get in without dismantling the cabinet. Unlike painted milk boxes that rust out at the door sills after a few school years, stainless surfaces take the daily bleach wipe-down without losing their finish.
Rolls Where Lunch Service Needs It
Four 4 inch casters roll the loaded cooler between the dock, the cooler room, and the serving line, so the same cabinet takes the delivery in the morning and works the line at noon. The 3/8 HP compressor runs on a standard 115 volt outlet with a NEMA 5-15P plug, no dedicated circuit required.
About Excellence Industries
Excellence Industries is a manufacturer of commercial refrigeration equipment with more than 70 years of industry experience, serving foodservice, retail, beverage, dairy, and ice cream markets. Its product portfolio includes glass door merchandisers, display freezers, storage refrigerators, milk coolers, ice cream cabinets, and custom refrigeration solutions designed for high-traffic commercial environments. The company focuses on efficient refrigeration performance, product visibility, and merchandising features that support retail and foodservice operations. Its refrigeration solutions are used by national restaurant chains, consumer brands, and institutional operators that require dependable performance, tailored configurations, and responsive aftermarket parts and technical support.
Features & Benefits
-
Serves school cafeterias and dining halls: holds 16 standard 13 x 13 x 11 in. milk crates, about 1024 half-pint cartons
-
Also configures for 12 of the larger 19 x 13 x 11 in. crates
-
Cold wall evaporator plus heavy duty fan motor hold +32°F to +38°F through door-cycling lunch service
-
Electronic thermostat with digital LED display makes temperature logs a one-look job
-
Stainless steel locking lid for top loading, stainless steel front doors for self-serve lines
-
Floor racks keep bottom crates off the cabinet floor, over a reinforced interior base
-
One-screw quick access panels put serviceable parts within reach of maintenance staff
-
Stainless steel interior wipes down to cafeteria sanitation standards
-
Rolls on four 4 in. casters between dock, cooler room, and serving line
-
3/8 HP compressor on a standard 115 volt outlet with NEMA 5-15P plug
-
Optional custom graphics for the exterior panels
-
Complies with 2017 DOE energy standards
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Excellence Industries MCSC-16 Milk Cooler
The Excellence Industries MCSC-16 is a school milk crate cooler that holds 16 standard 13 x 13 x 11 inch crates, roughly 1024 half-pint cartons, at dairy-safe temperature through a lunch rush. Cafeterias load it from the top through a stainless steel locking lid, and students serve themselves through the front stainless doors without a staff member standing guard.
16 Crates on Floor Racks, Two Ways In
Floor racks keep the bottom crates off the cabinet floor where condensation pools, and the reinforced interior base is built for the daily slam of full milk crates. The top lid takes the morning dairy delivery a full crate at a time; the front stainless steel doors put cartons at kid height for the serving line.
Cold Wall Plus a Heavy Duty Fan at +32°F to +38°F
A cold wall evaporator carries the base load while a heavy duty fan motor circulates air through the crate stack, holding +32°F to +38°F even with the doors cycling every few seconds during service. The electronic thermostat with digital LED display gives the kitchen manager a temperature check at a glance, which makes the health inspector's log a one-look job.
Built for a Decade of School Years
The interior is stainless steel, the lid and doors are stainless steel, and the serviceable parts sit behind one-screw quick access panels so maintenance staff can get in without dismantling the cabinet. Unlike painted milk boxes that rust out at the door sills after a few school years, stainless surfaces take the daily bleach wipe-down without losing their finish.
Rolls Where Lunch Service Needs It
Four 4 inch casters roll the loaded cooler between the dock, the cooler room, and the serving line, so the same cabinet takes the delivery in the morning and works the line at noon. The 3/8 HP compressor runs on a standard 115 volt outlet with a NEMA 5-15P plug, no dedicated circuit required.
About Excellence Industries
Excellence Industries is a manufacturer of commercial refrigeration equipment with more than 70 years of industry experience, serving foodservice, retail, beverage, dairy, and ice cream markets. Its product portfolio includes glass door merchandisers, display freezers, storage refrigerators, milk coolers, ice cream cabinets, and custom refrigeration solutions designed for high-traffic commercial environments. The company focuses on efficient refrigeration performance, product visibility, and merchandising features that support retail and foodservice operations. Its refrigeration solutions are used by national restaurant chains, consumer brands, and institutional operators that require dependable performance, tailored configurations, and responsive aftermarket parts and technical support.
Features & Benefits
-
Serves school cafeterias and dining halls: holds 16 standard 13 x 13 x 11 in. milk crates, about 1024 half-pint cartons
-
Also configures for 12 of the larger 19 x 13 x 11 in. crates
-
Cold wall evaporator plus heavy duty fan motor hold +32°F to +38°F through door-cycling lunch service
-
Electronic thermostat with digital LED display makes temperature logs a one-look job
-
Stainless steel locking lid for top loading, stainless steel front doors for self-serve lines
-
Floor racks keep bottom crates off the cabinet floor, over a reinforced interior base
-
One-screw quick access panels put serviceable parts within reach of maintenance staff
-
Stainless steel interior wipes down to cafeteria sanitation standards
-
Rolls on four 4 in. casters between dock, cooler room, and serving line
-
3/8 HP compressor on a standard 115 volt outlet with NEMA 5-15P plug
-
Optional custom graphics for the exterior panels
-
Complies with 2017 DOE energy standards
Resources & Downloads
See all from Excellence Industries
Specifications
| Capacity | 53 cu. ft. |
| Crate Capacity (13 x 13 x 11 in.) | 16 |
| Crate Capacity (19 x 13 x 11 in.) | 12 |
| Temperature Range | +32° to +38°F |
| Temperature Control | Electronic thermostat, digital LED display |
| Cooling System | Cold wall evaporator with heavy duty fan motor |
| Refrigerant | R-134a |
| Compressor | 3/8 HP |
| Voltage | 115/60/1 |
| Running Amps | 6.0 |
| Plug | NEMA 5-15P |
| Exterior Dimensions (W x D x H) | 59 1/8 x 32 3/4 x 41 3/4 in. |
| Lid | Stainless steel, locking |
| Doors | Stainless steel, front access |
| Interior | Stainless steel with floor racks |
| Base | Reinforced |
| Access Panels | One-screw quick access |
| Casters | 4 (4 in.) |
| Net Weight | 299 lbs. |
| Shipping Weight | 385 lbs. |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
5 Year
Compressor
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

