The Hydra-Kool KFM-SC-40-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SC-40-S is a 40-inch curved glass seafood case built specifically for fresh fish display. It holds product between 33 and 40 degrees Fahrenheit using low velocity forced air refrigeration that maintains the humidity levels fish and shellfish need to look their best under the glass. The integrated heavy-duty ice pan lets you bed down fillets, whole fish, and shellfish on crushed ice the way a proper seafood counter should, while the curved tempered glass front gives customers a full view of the spread. At 12.35 cubic feet of front display volume, the KFM-SC-40-S works well as a standalone seafood station in smaller grocery stores, fish markets, or as an end unit in a larger multiplexed seafood counter.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. Unlike standard deli cases that rely solely on air circulation, the KFM-SC series includes an integrated, non-removable heavy-duty ice pan built into the display deck. That ice bed lets you merchandise whole fish, fillets, and shellfish the way customers expect to see them at a quality seafood counter, sitting on a bed of crushed ice with cold air circulating above to keep surface temperatures consistent.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance without opening the case. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Curved Glass Display with Rear Sliding Doors
The tempered tilt-forward curved front glass gives customers a clear, unobstructed view of your seafood spread from the shopping aisle, while tempered side glass panels let product stay visible from every angle. Rear tempered glass sliding doors are removable for cleaning and provide your team easy access for restocking and arranging product without walking around to the front of the case. An anti-condensing system on the front glass prevents fogging that would obscure your display during busy periods when the case doors are opened frequently.
LED lighting in the canopy illuminates the display from above, keeping colors true on fish skin, shrimp, and fillet cuts without adding heat to the cabinet. The interior features a stainless steel frame with a stainless steel rear work bench for prep and staging. The exterior has a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to build out a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SC-40-S measures 40.4 inches in overall length by 43-7/16 inches deep by 49-7/16 inches high. The self-contained compressor draws 3/8 HP at 8.4 amps with 9.35 total amps on a 5-15P plug. Net weight is 333 lbs and shipping weight is 494 lbs. The unit ships in a crate measuring 48 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Curved glass seafood case designed for fresh fish display with integrated ice pan
-
12.35 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; floor drain required
-
Self-contained refrigeration, R404a refrigerant
-
Tempered tilt-forward curved front glass
-
Tempered side glass panels
-
Removable rear tempered glass sliding doors
-
Anti-condensing system for front glass
-
LED lighting in canopy
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame interior and rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing unit
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
3/8 HP compressor, 8.4 A, 9.35 total amps, 5-15P plug
-
Engineered for locations not exceeding 75°F and 55% RH
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Hydra-Kool KFM-SC-40-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SC-40-S is a 40-inch curved glass seafood case built specifically for fresh fish display. It holds product between 33 and 40 degrees Fahrenheit using low velocity forced air refrigeration that maintains the humidity levels fish and shellfish need to look their best under the glass. The integrated heavy-duty ice pan lets you bed down fillets, whole fish, and shellfish on crushed ice the way a proper seafood counter should, while the curved tempered glass front gives customers a full view of the spread. At 12.35 cubic feet of front display volume, the KFM-SC-40-S works well as a standalone seafood station in smaller grocery stores, fish markets, or as an end unit in a larger multiplexed seafood counter.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. Unlike standard deli cases that rely solely on air circulation, the KFM-SC series includes an integrated, non-removable heavy-duty ice pan built into the display deck. That ice bed lets you merchandise whole fish, fillets, and shellfish the way customers expect to see them at a quality seafood counter, sitting on a bed of crushed ice with cold air circulating above to keep surface temperatures consistent.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance without opening the case. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Curved Glass Display with Rear Sliding Doors
The tempered tilt-forward curved front glass gives customers a clear, unobstructed view of your seafood spread from the shopping aisle, while tempered side glass panels let product stay visible from every angle. Rear tempered glass sliding doors are removable for cleaning and provide your team easy access for restocking and arranging product without walking around to the front of the case. An anti-condensing system on the front glass prevents fogging that would obscure your display during busy periods when the case doors are opened frequently.
LED lighting in the canopy illuminates the display from above, keeping colors true on fish skin, shrimp, and fillet cuts without adding heat to the cabinet. The interior features a stainless steel frame with a stainless steel rear work bench for prep and staging. The exterior has a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to build out a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SC-40-S measures 40.4 inches in overall length by 43-7/16 inches deep by 49-7/16 inches high. The self-contained compressor draws 3/8 HP at 8.4 amps with 9.35 total amps on a 5-15P plug. Net weight is 333 lbs and shipping weight is 494 lbs. The unit ships in a crate measuring 48 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Curved glass seafood case designed for fresh fish display with integrated ice pan
-
12.35 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; floor drain required
-
Self-contained refrigeration, R404a refrigerant
-
Tempered tilt-forward curved front glass
-
Tempered side glass panels
-
Removable rear tempered glass sliding doors
-
Anti-condensing system for front glass
-
LED lighting in canopy
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame interior and rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing unit
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
3/8 HP compressor, 8.4 A, 9.35 total amps, 5-15P plug
-
Engineered for locations not exceeding 75°F and 55% RH
Resources & Downloads
See all from Hydra-Kool
Specifications
| Overall Dimensions (L x D x H) | 40.4" x 43-7/16" x 49-7/16" |
| Front Display Volume | 12.35 cu. ft. |
| Temperature Range | 33°F to 40°F |
| Refrigeration Type | Low Velocity Forced Air, Self-Contained |
| Refrigerant | R404a |
| Compressor HP | 3/8 |
| Compressor Amps (FLA) | 8.4 A |
| Lights/Fans/Heaters Amps | 0.95 A |
| Total Amps | 9.35 A |
| NEMA Plug | 5-15P |
| Voltage | 115V |
| Ice Pan | Integrated, Non-Removable Heavy-Duty; Floor Drain Required |
| Evaporator Coil | Coated |
| Insulation | CFC-Free Injected Foam |
| Front Glass | Tempered Tilt-Forward Curved Glass |
| Side Glass | Tempered |
| Rear Doors | Removable Tempered Glass Sliding Doors |
| Anti-Condensing System | Front Glass |
| Interior | Stainless Steel Frame, Stainless Steel Rear Work Bench |
| Front Panel | Silver Colored PVC-Coated Steel |
| End Panels | Foamed Polystyrene, Black |
| Kick Plate | Black Steel |
| Lighting | LED in Canopy |
| Temperature Control | Digital Controller with Digital Thermometer |
| Condensing Unit | Slide-Out |
| Standard Mounting | Leveling Feet |
| Optional Mounting | Adjustable Legs (5-1/8" to 7-5/8") or Casters (+4-3/8") |
| Multiplexing | Yes, with Optional Joining Kit |
| Operating Environment | Max 75°F, 55% RH |
| Net Weight | 333 lbs |
| Shipping Weight | 494 lbs |
| Crate Size (L x W x H) | 48" x 44" x 42" |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
4 Year
Compressor (Parts Only)
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

